Sugatsune SWF Series stainless steel pull SWF-690

Sugatsune SWF Series Stainless Pull For Cabinets

Sugatsune SWF Series stainless steel pull gives you a straight, modern handle with a 9 inch center to center layout, so you can span standard cabinet drilling while keeping a consistent line across doors and drawers. The SWF-690 model uses stainless steel material, which resists everyday wear in shop, residential, or commercial cabinetry where metal handles are grabbed constantly. Its overall 9-3/8 inch length provides a little overhang beyond the mounting holes, which helps visually balance wider drawer fronts and tall doors. A 1-3/8 inch projection sets the grip off the face of the cabinet far enough for finger clearance, supporting comfortable use when hands are gloved or wet. The 3/8 inch width keeps the pull visually clean and slim, which works well when you want hardware that reads as a simple bar rather than a bulky handle.

Key Stainless Steel Pull Details That Matter

• The 9 inch center to center dimension matches common cabinet drilling patterns, which reduces layout time when you are aligning multiple doors or retrofitting existing fronts.
• The 9-3/8 inch overall length leaves a small extension past the screw centers, which creates a balanced look on wider fronts and keeps the handle from feeling undersized.
• Stainless steel material provides a consistent stainless steel finish, which helps visually coordinate with stainless hinges, appliances, and other visible cabinet components.
• The SWF-690 part number identifies this pull within the SWF Series, which simplifies reordering when you standardize on this style across several jobs or areas.
• The stainless steel designation in the description defines both material and finish, which streamlines specification when matching written project documents or cabinet hardware schedules.

Mounting And Fit Details For The SWF-690 Pull

The 9 inch center to center measurement on the Sugatsune SWF Series SWF-690 lets you drill a consistent pair of holes across doors and drawers, which helps keep hardware lines straight when working down a bank of cabinets. The 1-3/8 inch projection sets the bar far enough from the face to clear fingers without feeling obtrusive, which is helpful on narrow hallway cabinets or tight shop storage. With a 3/8 inch width, the pull sits neatly on the stile or rail without covering too much wood, which is useful when you want grain or veneer to stay visible. The stainless steel build and stainless steel finish present the same metal tone on all visible surfaces, which supports a uniform look across a full kitchen, bath, or shop layout.

Using The SWF Series Pull In Cabinet Projects

Where The Sugatsune SWF-690 Pull Works Best

The Sugatsune SWF Series stainless steel pull in the SWF-690 size suits cabinet and drawer fronts that are laid out for a 9 inch center to center handle, so it integrates easily into designs using that spread. Its 9-3/8 inch overall length gives enough bar beyond the mounting points to look proportional on medium to large doors, which helps when you are lining up multiple handles on tall pantry units or banked drawers. The 1-3/8 inch projection keeps the handgrip separated from finished faces, which is useful on high-use fronts where fingerprints and contact marks on door surfaces are a concern. With a 3/8 inch width, the pull reads as a slim bar, which lets it sit comfortably on narrow stiles without crowding adjacent edges or trim details. Stainless steel construction pairs visually with other stainless components, so it supports a coherent hardware story across kitchens, workrooms, or storage installations.

Details That Support Consistent Installation Results

The 9 inch center to center dimension on the SWF-690 gives installers a fixed reference for drilling, which helps keep handle rows straight when working with jigs or production drilling setups. Because the overall length is 9-3/8 inch, there is a predictable amount of bar extending beyond each mounting point, which simplifies layout when you want end clearances to align from door to door. The 1-3/8 inch projection defines how far the pull stands off the surface, so you can plan clearances where doors open near walls, adjacent cabinets, or equipment. A 3/8 inch width allows accurate placement along narrow rails, which is especially helpful on small drawer fronts where wider pulls might conflict with edge profiles. The SWF-690 identification within the SWF Series lets shops and installers document the exact pull used on a project, which supports consistent matching when expanding or revisiting the same installation later.

Common Questions About The SWF-690 Stainless Pull

Choose The SWF-690 Pull For Stainless Cabinet Runs

The Sugatsune SWF Series stainless steel pull, model SWF-690, gives you a 9 inch center to center layout, a 9-3/8 inch overall length, and a 1-3/8 inch projection, so it fits common cabinet drilling while offering practical grip clearance. Its 3/8 inch width and stainless steel material with stainless steel finish support clean lines across doors and drawers, which suits both shop builds and on-site upgrades. For projects calling for a stainless bar-style handle in this size range, this pull provides clear dimensions for planning, drilling, and repeating the same look across multiple cabinet runs.