GEM Industries Trizact 11 inch sanding disc is an aluminum oxide abrasive disc designed for consistent surface finishing where a 60 micron grade is required. The Trizact construction and 60 micron rating work together to deliver uniform cut, which supports predictable scratch patterns across a run of parts. The 11 inch disc size matches larger pad diameters, so it can cover more area in each pass on wide panels or tops. The Hookit style backing is designed for hook-and-loop style attachment, which allows quick disc changes between grits or between stages of a sanding sequence. The no holes format keeps the abrasive face continuous, which helps maintain even contact on the work surface when used on compatible machines.
This Hookit aluminum oxide abrasive disc is designed to mount to a compatible hook-and-loop style backing pad, so installation is a press-on, peel-off step rather than a tool-based changeover. The 11 inch diameter means the pad and machine must match that size, allowing the disc edge to track correctly without overhang. The no holes face means it is suited to machines and setups that do not rely on through-disc dust extraction, keeping the surface continuous during operation. Once attached, the 60 micron abrasive surface supports controlled passes that align with finishing steps calling for that specific micron range.
This GEM Industries Trizact 11 inch sanding disc fits into sanding operations that use aluminum oxide abrasives in a defined 60 micron stage. The disc size and Hookit style backing align with machines equipped for 11 inch hook-and-loop pads, so it works within sanding stations already set up for that diameter. Because the disc has no holes, it is suited to equipment and workflows that do not depend on through-disc vacuum paths, which keeps the abrasive face solid while working across flat or gently contoured surfaces. Within a multi-step schedule, the 60 micron rating lets finishers place this disc at a repeatable point in their progression.
The defined 60 micron abrasive grading on this disc gives operators a specific level of cut to build into written shop standards, helping different team members produce matching surface profiles from job to job. The aluminum oxide construction supports that micron rating by providing a consistent abrasive mineral across the disc face, which helps maintain a uniform scratch pattern through the disc life. The Hookit backing makes changing worn discs straightforward, so an operator can stay within the 60 micron stage without extended downtime between changes. With the 11 inch diameter matching the proper pad size, the disc tracks across the workpiece with a broad contact path, which helps reduce uneven passes on wide parts. The no holes design leaves the abrasive coverage uninterrupted, which supports full-face contact where the machine setup fits this solid-disc style.
GEM Industries Trizact 11 inch sanding disc uses aluminum oxide abrasive, which provides a defined cutting action suited to applications that specify aluminum oxide at a 60 micron level.
The Hookit aluminum oxide abrasive discs use a hook-and-loop style backing, allowing discs to be pressed onto and pulled from compatible pads quickly during sanding sequences.
The aluminum oxide sanding disc 60 micron grading identifies a specific fine-cut level, so shops can place this disc at a defined step within a multi-stage finishing process.
The 11 inch Hookit sanding disc no holes design keeps abrasive coverage continuous, supporting full-face contact on compatible sanders that do not rely on through-disc extraction.
This Trizact aluminum oxide abrasive disc uses an 11 inch diameter, giving a broad contact area on each pass, which can reduce overlap passes on large, flat workpieces.
The manufacturer part number S-104A identifies this specific GEM Industries Trizact 11 inch sanding disc configuration, helping shops reorder the same 60 micron Hookit aluminum oxide disc.
This GEM Industries Trizact 11 inch sanding disc from Wurth Baer Supply combines an aluminum oxide abrasive with a defined 60 micron grade, giving shops a consistent step in their sanding sequence. The Hookit backing aligns with hook-and-loop pads, supporting quick swaps when changing discs or moving between stages. With its no holes surface and 11 inch diameter, it suits compatible machines set for solid-face discs in that size range, so crews can match disc, pad, and process with confidence.
Sold In: 1 Each