Hickory Hardware Manchester cup pull is a zinc die cast cabinet handle from the Oxford Antique Series in a Vibra Pewter finish, so it delivers a classic cup profile with a muted metallic tone that suits many cabinet styles. The 2-3/4 inch center to center design sets the mounting hole spacing, helping align new drilling or match an existing layout. The 3-1/4 inch overall width defines the pull footprint on the drawer front, which matters when lining pulls up visually across a bank of cabinets. A projection of 3/4 inch sets how far the pull stands off the surface, giving fingers room to grab while staying tight to the front for a clean look. The handle length or diameter of 1-3/8 inch describes the gripping dimension, which affects how the pull feels in hand during everyday use.
The 2-3/4 inch center to center measurement on this Belwith Keeler cup pull dictates where to drill mounting holes, which is important when lining up multiple pulls or reusing existing cabinet boring. The 3-1/4 inch width sets the edge-to-edge coverage on the drawer front, helping position the pull so it clears panel edges and any neighboring details. A projection of 3/4 inch defines how far the pull extends into the workspace, which matters when doors or drawers pass close to adjacent surfaces. The 1-3/8 inch handle length or diameter affects hand clearance at the cup opening, supporting a repeatable grip point on every drawer.
This Oxford Antique Series cup pull from Belwith Keeler works on cabinet and drawer fronts that can accept a 2-3/4 inch center to center mounting pattern, because that spacing sets the required hole layout. The 3-1/4 inch width suits many standard drawer rails, giving enough coverage without overwhelming narrower faces. Its Vibra Pewter finish pairs with other pewter-toned decorative hardware, supporting a consistent look across a full room of cabinets. The zinc die cast construction provides a metal body appropriate for residential cabinet applications, so it integrates smoothly into kitchen, bath, or shop furniture with similar hardware. The 3/4 inch projection keeps the pull compact, which helps in tight runs of cabinetry where doors, drawers, or nearby obstacles pass close by.
The defined 2-3/4 inch center to center spacing allows installers to use standard drilling jigs, which streamlines repetitive boring and keeps hardware lines straight from drawer to drawer. With a fixed 3-1/4 inch overall width, the pull sets a predictable visual proportion on each front, helping maintain even margins at edges when repeated across a run. The 1-3/8 inch handle length or diameter shapes the gripping area, giving users a stable place to pull against when moving heavier drawers. A projection of 3/4 inch limits how far the hardware protrudes into traffic paths, supporting smooth movement past open drawers while still offering space to hook fingers under the cup. The combination of zinc die cast material and Vibra Pewter finish delivers a uniform surface, which supports a consistent appearance when multiple pulls are installed side by side.
The Hickory Hardware Manchester cup pull uses a 2-3/4 inch center to center dimension, which sets the distance between mounting holes for layout and alignment on cabinet fronts.
The Oxford Antique Series cup pull has a width of 3-1/4 inches, so it covers a moderate span on the drawer face and helps establish balanced sightlines across multiple fronts.
The PA1021-VP cup pull is zinc die cast, giving it a solid metal construction that supports a consistent feel and finish on cabinet and drawer applications.
This Vibra Pewter cup pull has a projection of 3/4 inch, so it extends modestly from the cabinet face while leaving room for fingers to grip behind the cup edge.
The cabinet cup pull has a handle length or diameter of 1-3/8 inch, shaping the gripping area to offer a defined purchase point when opening and closing drawers.
This Belwith Keeler cup pull uses a Vibra Pewter finish, giving it a muted metallic appearance that coordinates with other pewter-toned cabinet hardware.
The Oxford Antique Series PA1021-VP cup pull from Belwith Keeler combines a 2-3/4 inch center to center layout, 3-1/4 inch width, and 3/4 inch projection, so it supports predictable drilling, consistent sightlines, and functional clearance on cabinet and drawer fronts. The zinc die cast construction with Vibra Pewter finish supplies a unified look and feel across multiple pulls, helping create a coordinated hardware run in kitchens, baths, or built-ins. Use these defined dimensions and finish details to match this Hickory Hardware Manchester cup pull to your planned cabinet style and drilling pattern for a straightforward hardware choice.
Sold In: 1 Each
