Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Grass TEC 872 hinge is a concealed cabinet hinge from Grass America designed for 1/2 inch overlay profile doors on face-frame cabinets, giving face-frame projects a clean look while keeping hardware hidden and protected in use. This TEC 872 110 degree self-closing hinge uses an all metal construction with a nickel finish, so the hinge resists everyday cabinet wear while maintaining a consistent appearance across multiple doors. A pre-mounted soft-closing mechanism in the hinge cup manages the closing motion, so doors move smoothly toward the frame instead of slamming against it. As a concealed face frame hinge in the concealed cabinet hinges class, it keeps the hinge body inside the cabinet, which supports precise door reveals on finished installations. Manufacturer part number 43729-17 identifies this specific TEC 872VS8-45 hinge cup dowel version, which helps match the same hinge style when adding doors or replacing existing units on a job.
This Grass TEC 872 self-closing hinge is specified as a face-frame concealed cabinet hinge, so it works within a face-frame construction style where the hinge mounts to the frame while the cup sits in the door. The standard 45mm boring pattern defines where the hinge cup sits in the door, supporting consistent drilling setups on multiple doors in a run. Three-dimensional hinge adjustment means you can shift the mounted door in depth, side-to-side, and height, allowing you to refine how the 1/2 inch overlay sits on the face frame. Height adjustment uses an elongated screw hole, giving extra travel for vertical correction if the first screw position is slightly off. The 110 degree opening angle provides wide access to the cabinet interior, so doors swing far enough to clear most common reach paths in everyday cabinet use.
This Grass TEC 872 110 degree self-closing hinge is designed for cabinet doors in face-frame applications, so it suits installations where a frame surrounds the opening and the door overlays that frame by 1/2 inch. The hinge belongs to the concealed cabinet hinges product class, which keeps the mechanism hidden when the door is closed, allowing the visible surfaces to show only the door and frame. Its 1/2 inch overlay capability on profile doors sets how far the door covers the frame, helping create consistent coverage on a bank of upper or base cabinets. The all metal construction with nickel finish supports use in typical residential or commercial cabinet environments, where repeated opening and closing are expected over time. The 110 degree opening gives doors enough swing to access contents comfortably while still controlling the motion through the self-closing function. As a TEC 872VS8-45 hinge cup dowel configuration identified by part 43729-17, it aligns with the TEC 872 series behavior described for soft closing and adjustment.
The TEC 872 hinge uses a three-dimensional hinge design, so you can adjust the mounted door in three directions and bring edges into alignment with neighboring doors. Horizontal and depth adjustments help refine the reveal between the door and frame, while the height adjustment via an elongated screw hole shifts the door up or down to match rail lines. The 3-way adjustable switch gives control over the soft-closing action, so you can set how much resistance the mechanism applies as the door closes and adapt closing speed to the door size. This control helps you match the feel of multiple doors, which is important when several TEC 872 hinges appear in the same room. The pre-mounted soft-closing mechanism in the hinge cup centralizes the damping at the hinge, so the self-closing function works together with the 110 degree opening angle to pull doors to the frame consistently from a wide swing. Minimal gap and protrusion in the hinge design support tight visual lines after you complete the adjustments, which benefits projects where a seamless cabinet front is part of the design intent.
The Grass TEC 872 self-closing hinge is designed as a concealed face frame hinge, so it is suited to cabinet projects that use a face-frame around the opening.
The hinge supports a 1/2 inch overlay on profile doors, which defines how far the door covers the face frame and helps maintain consistent reveals across multiple cabinet doors.
The Grass TEC 872 110 degree self-closing hinge opens to 110 degrees, allowing the door to swing wide for access while still returning to the frame through the self-closing action.
The 3-way adjustable switch regulates the soft-closing action, so you can set resistance and closing speed to suit the specific door size and achieve a consistent closing feel.
The standard 45mm boring pattern defines the hinge cup hole layout, which supports repeatable drilling setups when preparing multiple doors for TEC hinges in the shop.
The all metal construction with a nickel finish provides a sturdy hinge body and uniform appearance, supporting repeated door use while matching other nickel cabinet components.
The Grass TEC 872 hinge combines 1/2 inch overlay capability, a 110 degree self-closing action, and a three-dimensional hinge design, so it supports precise door alignment and controlled closing on face-frame cabinets. The standard 45mm boring pattern and height adjustment through an elongated screw hole help streamline drilling and fine-tuning, which matters when you are aligning several doors in a run. With its all metal construction, nickel finish, and TEC 872VS8-45 hinge cup dowel configuration under part number 43729-17, this concealed cabinet hinge brings consistent behavior to both new cabinet builds and updates that call for a concealed face frame hinge solution.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  GF43731-43 Mfr# 43731-43 | Grass TEC 872 Self-Close 4mm Base Plate Nickel, Screw-On - 43731-43 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1000 Each |  WW42300 Mfr# 3670000139961 1000 | Würth #6 x 5/8" Flat Head Hinge and Drawer Slide Installation Screw Phillips Drive - Sharp Point Coarse Thread Zinc, 3670000139961 1000 - 1000/Box |
