Berenson Euro Tradition Series 3-3/4" (95 mm) Center to Center Matte Black Pull, - 2937-155-P

Berenson Euro Traditions Pull For Cabinet Doors

Berenson Euro Traditions pull gives a 3-3/4 inch center to center mounting layout that sets precise handle spacing on cabinet doors and drawers, which helps installers line up multiple pulls across a run of fronts. The pull is part of the Euro Traditions collection, so it maintains consistent styling when you are matching other pieces from the same line. Its matte black finish creates a uniform dark appearance on the front face, which supports design choices where black hardware is part of the overall cabinet look. The pull is made from zinc die cast material, so each piece has a cast metal body that feels solid in hand during everyday use. With a total length of 4-5/16 inch, this pull extends slightly past the mounting centers at each end, giving a visually balanced grip area on typical cabinet rails.

Key Euro Traditions Pull Details For Projects

• The 3-3/4 inch (96 mm) center to center dimension sets reliable hole spacing, which simplifies layout when drilling for multiple pulls on a bank of doors or drawers.
• The matte black finish provides a consistent dark surface, which helps the hardware visually tie into black hinges, fixtures, or other black design elements in the room.
• The zinc die cast construction forms the pull as a single metal casting, which gives a firm feel when gripping and resists flexing during repeated daily use.
• The 4-5/16 inch overall length defines how much of the rail face the pull covers, which helps plan proportions on narrower or wider cabinet fronts.
• The 9/16 inch width across the pull body sets how slim the front profile appears, which affects both the visual weight and the finger contact area.
• The 9/16 inch base diameter establishes the footprint where the pull meets the door or drawer, which helps cover drilled holes cleanly at each mounting point.
• The 1-1/16 inch projection sets how far the pull stands off the cabinet face, which creates clearance for fingers to wrap behind the handle without contacting the door surface.

Mounting Euro Traditions Pull On Cabinet Fronts

The 96 mm center to center measurement on this Euro Traditions pull gives a fixed distance between mounting points, which guides drilling when laying out holes on new cabinet fronts or replacements. The pull width of 9/16 inch and projection of 1-1/16 inch define how far the handle stands out and how slim it looks, which matters when aligning with surrounding fronts in a tight kitchen layout. A base diameter of 9/16 inch at each end covers the mounting hole area, which keeps the transition from pull to door face clean once fastened. The pull length of 4-5/16 inch helps position the handle comfortably on standard drawer fronts, giving a centered grip area between the mounting holes.

Using This Berenson Pull In Cabinet Runs

Where This Matte Black Pull Fits Best

This matte black cabinet handle works in projects that call for a 3-3/4 inch center to center pull, because the 96 mm spacing matches many cabinet drilling layouts. The 4-5/16 inch overall length lets the pull sit comfortably on common kitchen and bath drawer fronts, giving enough bar length to grab without overwhelming narrow rails. With a 9/16 inch width, the pull presents a slim face to the room, which helps it sit neatly on face frame or frameless cabinet designs where a lower profile is preferred. The 1-1/16 inch projection off the face provides working clearance behind the pull, so fingers can hook the handle even on doors with thicker edge profiles.

Details That Support Consistent Cabinet Results

The zinc die cast material of this cabinet pull creates a uniform casting from piece to piece, which supports consistent feel and appearance across an entire run of cabinets. The 9/16 inch base diameter at each mounting point gives a predictable footprint that hides the drilled holes, which helps when aligning pulls along rail lines or across multiple drawer stacks. Because the center to center dimension is specified at both 3-3/4 inch and 96 mm, installers can work from either imperial or metric measurements while keeping hole patterns aligned on jigs. The matte black finish keeps reflections low on the handle surface, which maintains a steady look under varied lighting along long cabinet runs.

Common Questions About This Euro Traditions Pull

Select This Pull For 96mm Matte Black Runs

This Euro Traditions matte black pull from Berenson pairs 96 mm center to center spacing with a 4-5/16 inch overall length, which suits many cabinet door and drawer layouts. The zinc die cast construction and 1-1/16 inch projection give a solid, usable grip in daily operation. With a 9/16 inch width and matching 9/16 inch base diameter, the pull keeps a slim, controlled footprint on the front while still covering drilled holes. For projects that specify a 3-3/4 inch center to center matte black cabinet handle, this Berenson 2937-155-P model provides defined dimensions and consistent styling for coordinated cabinet runs.