Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Euro Tradition pull gives a 3-3/4 inch center to center grip that lines up with common cabinet and drawer drilling, so existing 3-3/4 inch hole patterns can be used to place or reposition this handle on face frames or doors. The pull is part of the Euro Traditions collection, so it maintains a consistent style for projects that repeat this line across multiple cabinets or furniture pieces. Its zinc die cast material creates a solid feel in the hand, which supports confident opening and closing of doors and drawers during daily use. The dull rust finish provides a warm-toned look, helping this pull coordinate visually with rustic, traditional, or Euro-inspired fronts. Overall length of 4-5/16 inches keeps the pull spanning slightly beyond the mounting holes, which gives knuckles clearance around the hardware edge. A projection of 1-1/16 inches adds fingertip space between the pull and the cabinet surface for a straightforward grip.
The 3-3/4 inch center to center dimension establishes the drilling pattern for this Berenson Euro Tradition pull, so shop jigs or CNC programs targeting 96 mm spacing can be used to prepare fronts. Because the manufacturer identifies the screw size as 8-32, the threaded inserts in the pull are matched to standard 8-32 machine screws, which allows installers to work with common cabinet screw tooling. The overall 4-5/16 inch length keeps end clearances predictable around neighboring hardware or panel edges when laying out multiple pulls on banks of drawers. With a projection of 1-1/16 inches, the grip stands off enough from the face to operate doors while keeping the pull close to the surface, which supports a tidy profile on shallower spaces.
This Berenson Corporation Euro Traditions pull is described for the decorative hardware and moldings category under handles and pulls, so it is suited to cabinet and furniture fronts that call for a handle-style grip. The dull rust finish ties into projects where a rust-toned metal detail supports the overall design, such as traditional kitchens, built-ins, or furniture pieces that rely on warm hardware color. Its 3-3/4 inch, or 96 mm, center to center size is a common drilling standard in cabinet shops, which lets this pull align with existing templating on many drawers and doors. Because the pull belongs to the Euro Traditions collection, it can be used wherever that collection is specified in a job package to keep a unified look across various cabinet zones. The compact 4-5/16 inch length also makes it practical on smaller doors, so one pull model can span a range of cabinet widths on the same project.
The defined center to center spacing of 3-3/4 inches, also listed as 96 mm, supports repeatable drilling because the dimension is standard across metric and imperial layouts, which keeps hole placement consistent when multiple installers or machines are involved. The 9/16 inch base diameter on each mounting point gives a modest footprint around the fastener area, which can help visually mask slight positional variation if the mounting holes vary by a small amount on site. With a width of 9/16 inch across the pull bar, the hand contact area is narrow enough to sit comfortably on thin rails, which helps avoid crowding decorative profiles near the edge of a cabinet frame. The 1-1/16 inch projection is balanced to give fingers clearance while limiting how far the hardware extends into walk paths, which supports a streamlined cabinet face on tight runs. Zinc die cast construction allows this pull to be produced to the specified dimensions repeatedly, which is useful when ordering multiples for a large layout that depends on matching hardware geometry.
The Berenson Euro Tradition pull uses a 3-3/4 inch, or 96 mm, center to center spacing, so drilling layouts can follow that measurement across cabinet doors and drawers.
The Euro Traditions pull is zinc die cast, providing a solid, single-piece casting that keeps the handle shape and dimensions consistent on every installed pull.
The 2938-1FE-P Euro Traditions pull has a dull rust finish, giving a rust-toned appearance that supports warm, traditional cabinet and furniture designs.
The dull rust cabinet pull projects 1-1/16 inches from the mounting surface, creating hand clearance behind the bar while maintaining a low-profile cabinet face.
This zinc die cast cabinet pull is threaded for 8-32 screws, so it mates with standard 8-32 cabinet fasteners commonly used in shop and field installations.
The Berenson decorative handle is 4-5/16 inches long and 9/16 inch wide, giving a compact footprint that suits smaller doors and drawers.
The Berenson Euro Tradition pull in dull rust combines a 3-3/4 inch, or 96 mm, center to center layout with zinc die cast construction, giving a consistent handle size and warm finish for cabinet or furniture runs. Its 4-5/16 inch overall length, 9/16 inch width, and 1-1/16 inch projection provide a compact yet functional grip that works across doors and drawers in the same project. For jobs calling for Euro Traditions collection styling with a rust-toned appearance, this pull aligns the specified dimensions and finish into one repeatable hardware choice.
Sold In: 1 Each
