Berenson American Classic Series 3" (76 mm) Center to Center Rubbed Bronze Pull, - 9885-110-P

Berenson American Classic Pull For Cabinet Jobs

Berenson American Classic pull describes a cabinet handle from the American Classics collection that uses a 3 inch center to center drilling, so it matches a common boring pattern on many cabinet doors and drawers. The pull is made from zinc die cast material, which creates a rigid handle body that holds up under regular opening and closing. A rubbed bronze finish covers the pull, providing a dark, traditional look that pairs with many stained or painted cabinet surfaces. The overall length is 3-11/16 inches, giving enough hand contact area for a solid grip when operating doors or drawers. A projection of 1-1/4 inches spaces the hand away from the cabinet face, which helps fingers clear the edge as the door swings. The pull width of 3/8 inch keeps the profile slim, which is useful where hardware needs to stay visually light across a run of fronts.

Key Details That Support Cabinet Work

• The 3 inch center to center dimension sets consistent hole spacing, which simplifies layout and drilling when repeating the pull across multiple cabinet fronts in a kitchen or shop run.
• The 3-11/16 inch overall length provides a handle that spans more of the rail or drawer front, which helps distribute pulling force across a wider area of the door or drawer face.
• The 1-1/4 inch projection holds the gripping surface away from the cabinet, which allows fingers to wrap behind the pull without rubbing against the door or drawer surface during use.
• The 3/8 inch width keeps the pull visually narrow, which helps maintain a clean line on smaller doors while still giving enough edge for a comfortable grasp and pull.
• The 5/8 inch base diameter defines the footprint at each end of the pull, which covers the drilled holes at the mounting points and creates a defined contact circle against the cabinet surface.

Installation Dimensions For Consistent Fit

The 3 inch center to center mounting on this rubbed bronze cabinet pull sets the distance between the two fastener points, so holes can be drilled accurately using standard cabinet drilling jigs. An 8-32 x 1 inch screw size is specified, which matches a common machine thread used for cabinet hardware and gives enough thread depth through typical door and drawer front thicknesses. The 5/8 inch base diameter at each end sits against the face of the cabinet, which helps align the pull squarely as it is tightened down. The 1-1/4 inch projection defines how far the pull extends from the face, so installed hardware lines up consistently across multiple doors and drawers in the same project.

Using This Rubbed Bronze Pull In Projects

Where This 3 Inch Pull Works Best

This rubbed bronze cabinet pull is part of the American Classics collection, which positions it for use on cabinets where a traditional style is desired. The 3 inch center to center measurement suits many cabinet door and drawer layouts that are already bored on a 3 inch pattern, so it fits well into standard face frame or frameless cabinet designs. With an overall length of 3-11/16 inches, the pull is sized for small to medium cabinet doors and drawers, providing enough length for an easy grasp without dominating the front. The zinc die cast construction supports everyday cabinet use in kitchens, baths, or shop storage because the solid casting gives a firm feel when operated repeatedly.

Details That Help Repeatable Hardware Results

The defined 3 inch center to center spacing on this Berenson 9885-110-P pull allows installers to set up drilling jigs or templates once and repeat the same hole pattern across many fronts, which speeds production in larger cabinet runs. The 8-32 x 1 inch screw size ties the pull to a known fastener standard, which helps match bit selection and threading expectations during installation. A projection of 1-1/4 inches keeps the gripping area clear of the cabinet surface, supporting smooth operation even when doors sit close to adjacent appliances or walls. The 5/8 inch base diameter gives each mounting point a clear, round bearing surface on the cabinet, which helps the pull seat flat and look aligned when tightened. The combination of 3-11/16 inch overall length and 3/8 inch width sets consistent proportions, so multiple pulls line up visually when installed in rows or banks of drawers.

Common Questions About This Cabinet Pull

Selecting This Pull For Your Next Cabinet Run

This zinc die cast cabinet pull in rubbed bronze uses a 3 inch center to center mounting, tying directly to a common cabinet drilling pattern for doors and drawers. The combination of 3-11/16 inch overall length, 1-1/4 inch projection, and 3/8 inch width creates a compact handle that still offers a solid handhold in everyday cabinet use. The 5/8 inch base diameter and 8-32 x 1 inch screw specification support accurate positioning and secure fastening. For cabinet projects that call for American Classics styling with defined installation dimensions, this rubbed bronze pull is ready to be applied across coordinated fronts.