Berenson American Classic Cup Pull For Cabinets

Berenson American Classic Series 3 inch cup pull gives a cabinet door or drawer a traditional cup grip that is easy to grab during everyday use. The American Classics collection detail defines the pull as a decorative option, so it can visually match other American Classics pieces across a project. The dull rust finish sets the surface apart from brighter metals, which helps it blend into warm-toned cabinet finishes. Zinc die cast construction forms the body of the pull, so the shape is consistent from piece to piece on a run of cabinets. The 3 inch center to center mounting layout controls the drilling pattern on the face, which supports repetitive, accurate boring across multiple fronts. A projection of 15-16 inch holds fingers away from the cabinet face during operation, which can reduce rub marks on the finish. The 1-7-16 inch width and 4-11-16 inch length define the footprint on the stile or drawer front, which helps with layout decisions.

Key Details Of This Dull Rust Cup Pull

• The American Classics collection identity ties this cup pull to the same family, which helps keep a consistent style when matching other American Classics decorative hardware on a job.
• Zinc die cast material forms the pull body, creating a solid one-piece shape that supports predictable contour and feel across every installed cup.
• The dull rust finish is applied over the zinc die cast base, giving the surface a muted, aged look that pairs well with rustic or warm cabinet colors.
• A 3 inch center to center dimension sets the hole spacing, so boring fixtures or templates can be set once and repeated on every cabinet front using this pull.
• The 4-11-16 inch overall length defines how much of the drawer or door face the pull spans, which is useful when aligning multiple pulls across wider fronts.
• A 15-16 inch projection measures how far the pull extends from the cabinet surface, leaving space for fingers behind the lip while the door or drawer is operated.
• The 1-7-16 inch width determines the vertical space the pull occupies, which matters when positioning it between rails or neighboring design details.
• Screw size 8-32 x 1 inch is specified for mounting, so thread size and length are known when threading into cabinet fronts of typical thickness.

Cabinet Mounting And Hole Layout Details

The 3 inch center to center dimension on this Berenson 9892-1FE-P cup pull establishes the exact distance between the two mounting points, which guides where to bore through the drawer or door face. A 4-11-16 inch overall length means the cup spans beyond the hole centers at both ends, so the mounting holes sit inboard of the visible ends of the pull. The 1-7-16 inch width defines the vertical band it occupies, which helps when aligning the pull on narrow rails. With a 15-16 inch projection, the front edge of the cup stands off from the cabinet surface, which provides finger clearance when pulling a loaded drawer. The specified screw size of 8-32 x 1 inch describes the machine screw thread and shaft length used with this pull, so the mounting interface is standardized.

Using The American Classics Pull In Projects

Where This 3 Inch Cup Pull Works Best

This Berenson American Classic Series 3 inch cup pull is identified for use on cabinet doors and drawers where a cup-shaped grip is preferred. Its placement in the decorative hardware and moldings category frames it as a visible front-of-cabinet component, so it plays both a functional and stylistic role on kitchen, bath, or shop cabinetry. The American Classics collection label ties it to a specific design family, which is useful when the same look is carried across doors, drawers, and other openings. A dull rust finish allows the pull to sit comfortably on projects featuring stained wood tones, because the muted color does not overpower the grain. Zinc die cast construction gives the cup pull a defined molded profile, so each installed piece presents the same contour when lined up across a run of cabinets.

Details That Support Consistent Cabinet Results

The 3 inch center to center mounting layout on this cup pull locks in a standard hole spacing, which helps maintain straight, level alignment when the same measurement is repeated across multiple fronts. The 4-11-16 inch overall length affects how far the pull reaches across a drawer face, supporting even visual spacing when arranging several pulls in a row. A 1-7-16 inch width defines the vertical dimension of the cup, which aids in placing it between rails without crowding decorative molding. With a 15-16 inch projection, the grip stands off from the cabinet surface enough to clear fingers, which supports smooth operation when opening deeper drawers. The specified screw size, 8-32 x 1 inch, indicates a common machine thread and length that tie the pull to typical cabinet construction, helping maintain consistent fastening across the project.

Common Questions About This Berenson Cup Pull

Select This Cup Pull For Defined Layouts

The Berenson American Classic Series 3 inch cup pull in dull rust combines a 3 inch center to center layout, 4-11-16 inch length, and 1-7-16 inch width to give clear mounting dimensions. Zinc die cast construction and the American Classics collection styling keep the look and profile consistent from front to front. By relying on the specified 15-16 inch projection and 8-32 x 1 inch screw size, a project can standardize both grip clearance and thread interface across cabinets. For work calling for a cup-style pull in a muted dull rust finish with defined measurements, this Berenson 9892-1FE-P model provides a clearly documented option.