Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Provence 4 inch cabinet pull identifies this piece as a handle from the Provence Series with a 4 inch center to center design, so it lines up with standard 4 inch drilled hole patterns on cabinets and drawers. The steel material gives the pull a solid feel in hand, which supports repeat use on frequently opened doors and drawers. The antique pewter finish provides a muted metallic look, which helps this pull blend with traditional or classic cabinetry. The overall 4-5/16 inch length slightly overhangs the 4 inch mounting span, giving a balanced edge-to-edge appearance on typical cabinet fronts. The 3/4 inch width creates a defined gripping surface, which helps fingers find the pull consistently. The 1-9/16 inch projection sets the handle off the face of the cabinet, creating clearance for fingers between the pull and door or drawer front.
The 4 inch center to center specification sets the screw hole spacing, which lets the pull seat cleanly on doors or drawers drilled on that standard pattern. The overall 4-5/16 inch length allows a small margin beyond the mounting holes, which can help cover slight variances in drilling on cabinet faces. The 5/16 inch base diameter describes the footprint where the pull meets the cabinet surface, which establishes a defined contact point against the door or drawer. The 3/4 inch width across the handle provides a consistent gripping bar, which aids in predictable hand placement. The 1-9/16 inch projection determines stand-off from the cabinet, which allows fingers to wrap behind the handle without contacting the door or drawer front.
The Provence Series designation ties this pull to the Provence family of decorative hardware, which helps create a coordinated look when the same series is used across multiple cabinets and drawers. The antique pewter finish gives the pull a classic tone, which aligns with cabinetry that favors traditional, rustic, or softly aged metal accents. The 4 inch center to center measurement suits cabinets designed around that common mounting standard, which is frequently used on kitchen, bath, and utility cabinet layouts. The 4-5/16 inch length lets the pull span a moderate section of a drawer front or rail, which makes it practical for both doors and smaller drawers in the same run. The 3/4 inch width and 1-9/16 inch projection provide a hand-friendly profile, which is useful in areas where the pull will be used repeatedly throughout the day.
The steel material at the core of the pull establishes a rigid structure, which helps the handle stay stable once secured through the 4 inch on-center mounting holes. The 5/16 inch base diameter at each end of the pull defines the contact area against the cabinet surface, which supports a clean interface between the hardware and the door or drawer face. The 8-32 x 1 inch screw size gives a clear thread and length specification for mounting, which lets installers match the pull to typical cabinet door and drawer thicknesses that accept that screw format. The 1-9/16 inch projection sets a consistent offset from the cabinet front, which promotes uniform alignment when multiple pulls are mounted in a row. The Provence Series naming and the 9960-2AP-P manufacturer part number together provide an exact identifier, which helps cabinet shops and installers repeat the same selection across projects or during later additions.
The Berenson Provence Series pull has a 4 inch center to center, 4-5/16 inch overall length, 3/4 inch width, 1-9/16 inch projection, and 5/16 inch base diameter, which together define its fit on cabinet fronts.
The 4 inch center to center spacing sets the distance between mounting holes, which matches cabinets and drawers drilled on a 4 inch pattern for straightforward placement of the pull.
The Berenson Provence Series pull is made from steel, which gives the handle a solid core for daily use on cabinet doors and drawers once it is mounted.
The antique pewter finish defines the surface appearance of the pull, which lets it coordinate with other antique pewter cabinet hardware and supports a traditional visual style.
The 1-9/16 inch projection sets how far the pull stands off the cabinet face, which provides space for fingers to grip behind the handle during opening and closing.
The 9960-2AP-P part number identifies this specific Provence Series 4 inch center to center antique pewter steel pull, which distinguishes it from other sizes or finishes in the line.
The combination of 4 inch center to center spacing, 4-5/16 inch length, and 1-9/16 inch projection positions this Berenson Provence Series pull as a practical option for standard cabinet layouts that use that drilling pattern. The antique pewter finish and Provence Series styling provide a coordinated appearance when the same pull is repeated across doors and drawers. The steel construction, defined 3/4 inch width, and 5/16 inch base diameter give clear physical parameters, supporting consistent results on both new installations and replacements where dimensions and finish match the project needs.
Sold In: 1 Each
