Berenson Euro Classica Series 5-1/16" (128 mm) Center to Center Brushed Tin Pull, - 7085-1BT-P

Euro Classica Pull 128mm Center To Center Use

Euro Classica pull 128mm center to center from Berenson Corporation is a zinc die cast cabinet pull in a brushed tin finish, so it delivers a defined Euro Classica style while matching other brushed tin decorative hardware on the same run. The 5-1/16 inch center to center drilling gives a consistent layout for doors or drawers using standard 128 mm boring, which helps keep hole spacing uniform across banks of fronts. Overall length of 6-3/8 inches provides a bit of overhang past the boring, giving fingers space to grab from the side. The 1-1/8 inch projection sets the pull off the face just enough for a solid handhold while keeping it close to the cabinet for a streamlined profile. Material listed as zinc die cast supports a solid, weighty feel in use and a stable base under repeated pulls on busy installations.

Key Euro Classica Pull Details For Jobs

• The 5-1/16 inch (128 mm) center to center dimension matches standard Euro boring patterns, which simplifies layout on new cabinet runs and helps align replacements on existing fronts without re-drilling.
• The brushed tin finish coordinates with other brushed tin decorative hardware, so banks of cabinets or mixed hardware locations keep a consistent appearance from one door and drawer face to the next.
• The zinc die cast material creates a rigid pull body, which helps the handle feel solid in the hand during repeated use on heavily cycled kitchen, bath, or shop cabinets.
• The 6-3/8 inch overall length extends beyond the mounting holes, giving more grab area for larger hands while still fitting typical residential cabinet rail widths cleanly.
• The 1-1/8 inch projection sets the gripping surface off the cabinet face, which provides fingertip clearance and reduces knuckle contact with the door or drawer front while opening.
• The 9/16 inch width offers a compact front profile, which lets this pull sit cleanly on narrow drawer rails or smaller doors without visually overpowering the front.

Mounting And Sizing Details For This Pull

This Berenson Euro Classica Series pull uses a 5-1/16 inch center to center mounting, so the two mounting points are spaced at 128 mm along the cabinet face, fitting common Euro-drilled fronts. The pull is designed around an M4 x 45mm screw size, which matches typical metric cabinet hardware threads found on many cabinet doors and drawers. A base diameter of 3/4 inch at each foot gives a defined contact area on the surface, helping the pull sit flat on the face once fastened. With a 6-3/8 inch overall length, the handle provides extended grip space while still landing comfortably on standard cabinet stiles and rails.

Using This Berenson Euro Classica Pull In Projects

Where This Euro Classica Pull Works Best

The Euro Classica Series 5-1/16 inch center to center pull is specified as part of the Berenson Euro Classica collection, so it ties in visually anywhere that collection is already planned or in place. Its brushed tin finish lets it sit alongside other brushed tin cabinet hardware, which is useful when tying together kitchens, baths, or built-ins with one finish story. The listed category as Handles and Pulls, Berenson, positions this piece directly for cabinet doors and drawers, so it suits casework where a decorative yet defined pull is required instead of a knob. A 9/16 inch width keeps the pull visually slim, allowing it to work on smaller doors and narrower drawer fronts where a wider bar might crowd the panel edges.

Details That Support Repeatable Layout And Fit

The 5-1/16 inch (128 mm) center to center dimension provides a clear drilling reference, so installers can use the same boring measurements across multiple cabinets for consistent alignment. The M4 x 45mm screw size defines the thread and reach for fastening, which matters when matching to common cabinet front thicknesses and existing metric hardware threads. Projection at 1-1/8 inches places the gripping bar comfortably away from the surface, giving space for fingers to wrap behind the pull and easing operation on heavier drawers or doors. The 3/4 inch base diameter at each mounting point offers a stable footprint, helping seat the pull evenly against the cabinet face once tightened. Overall length of 6-3/8 inches shifts the grip points slightly wider than the boring line, giving users more leverage across the handle span when opening tall pantry doors or wide drawers that see daily loading.

Common Questions About This Euro Classica Pull

Select This Pull For Euro Classica Cabinet Runs

The Berenson Euro Classica Series 5-1/16 inch center to center brushed tin pull combines a 128 mm boring, 6-3/8 inch overall length, and 1-1/8 inch projection to suit typical cabinet doors and drawers. Zinc die cast construction and a brushed tin finish tie into the Euro Classica collection, so a single model can carry through a run of fronts with consistent feel and appearance. For projects calling for a brushed tin Euro-style handle with clearly defined dimensions, this pull provides a straightforward match.