3 Inch Natures Splendor Leaf Pull For Cabinets

3 inch Natures Splendor leaf pull from Amerock Corporation gives cabinet doors and drawers a nature-inspired grip point using an intricate leaf design from the Natures Splendor Collection. The hand-crafted and intricate design influenced by nature provides a decorative focal point on face frames and drawer fronts, helpful when matching organic style projects. Its 3 inch (76 mm) center-to-center hole spacing aligns with common drilling patterns, which supports straightforward layout work on new cabinetry or when changing handles on existing fronts. The pull measures 5-5/8 inches in overall length, so it spans more of the rail or drawer front for a visually anchored look on standard cabinet widths. A 1 inch projection creates a defined space behind the pull for fingers, supporting repeatable gripping without crowding the door surface.

Design, Finish, And Size Details That Matter

• The hand-crafted and intricate design influenced by nature shapes the pull into a leaf form, adding detailed relief that can visually tie into natural wood grains and other organic design elements on cabinet runs.
• The Natures Splendor Collection identity groups this pull with matching thematic pieces, which aids project planning when coordinating handles on doors and drawers in the same room or millwork run.
• The Weathered Nickel finish presents a muted metal surface that can sit comfortably against both light and dark cabinet finishes, supporting projects that call for a softer metallic accent rather than a bright reflective look.
• The zinc die-cast material creates a molded cabinet pull body, which supports crisp detail in the leaf pattern and maintains consistent sizing across multiple pulls installed on the same job.
• The 5-5/8 inch overall length spreads the visual mass of the pull across more of the stile or drawer front, which can help balance proportions on standard base and wall cabinet widths in kitchens or built-ins.

3 Inch Center To Center Mounting Layout

The specified 3 inch (76 mm) center-to-center dimension defines the distance between mounting holes, so installers can use standard 3 inch drill jigs or existing patterns when setting this pull. This measurement allows direct placement on cabinet doors or drawers already bored for 3 inch hardware, supporting replacements that maintain existing hole layouts. The 1 inch projection keeps the gripping surface stands off from the door or drawer face at a consistent depth, assisting with alignment when pulls must clear adjacent trim or neighboring fronts. An 11/16 inch width concentrates the leaf form across a relatively narrow band, which helps when fitting multiple pulls on small drawer faces or narrow rails without overwhelming the available surface.

Using This Amerock Leaf Pull In Projects

Where The Weathered Nickel Leaf Pull Fits

This Amerock Corporation Natures Splendor leaf pull in Weathered Nickel fits projects calling for a decorative handle on cabinet doors and drawers within the Decorative Hardware & Moldings, Handles and Pulls category. Its 3 inch center-to-center layout matches many residential cabinet drilling standards, which is useful on kitchen, bath, or built-in cabinetry that already uses 3 inch spreads. The 5-5/8 inch overall length can complement both smaller wall cabinet doors and wider base cabinet drawers, giving a consistent visual theme across different cabinet sizes. Weathered Nickel finish works with a range of stain and paint colors, providing flexibility when aligning hardware with existing casework or refurbishing cabinets.

Details Supporting Consistent Alignment And Grip

The 3 inch Natures Splendor leaf pull uses zinc die-cast construction to deliver a consistent body shape from piece to piece, which supports straight visual lines when several pulls are installed across a bank of drawers. The 1 inch projection sets a stable stand-off distance from the cabinet face, creating a predictable clearance space for fingers along the full run. An 11/16 inch width allows this pull to sit comfortably on narrow rails while still showing the leaf detail, helping maintain balanced placement during layout. The Natures Splendor Collection label identifies it as part of a coordinated family, so using this model on doors and drawers can create a unified appearance throughout an installation. Manufacturer part number BP1580WN uniquely identifies this specific 3 inch Weathered Nickel leaf pull, which simplifies specifying, reordering, or matching hardware on later phases of the same project.

Practical Questions About This Amerock Pull

Selecting This Leaf Pull For Your Next Run

The 3 inch Natures Splendor leaf pull in Weathered Nickel from Amerock Corporation pairs decorative, nature-influenced design with standard 3 inch center-to-center mounting and zinc die-cast construction. When a project calls for a leaf-themed cabinet handle that aligns with common drilling patterns while adding detailed relief, this BP1580WN pull from the Decorative Hardware & Moldings, Handles and Pulls category offers a defined footprint and finish for cabinet doors and drawers.