Amerock Divinity Series Pewter 1-1/4 in (32 mm) Diameter Knob, - BP5261PWT

Amerock Divinity Pewter Knob For Cabinets

Amerock Divinity pewter knob is a 1-1/4 inch diameter cabinet knob designed for decorative and functional use on doors and drawers. The knob belongs to the Divinity Collection, which features a swirl of stacked ridges that adds visual interest to cabinet faces. Its 1-1/4 inch, or 32 mm, diameter gives a comfortable gripping surface that works well on typical residential cabinetry. The 1-3/8 inch, or 35 mm, projection spaces hands away from the cabinet surface so fingers clear the door edge easily when pulling. A pewter finish provides a muted metallic look that coordinates with many painted or stained wood tones in kitchens, baths, or built-ins. The knob is made from zinc die-cast material, giving a solid feel in the hand during regular opening and closing. The Amerock BP5261PWT part number identifies this specific Divinity design, size, and finish for consistent selection across a project.

Key Divinity Knob Details For Projects

• The swirl of stacked ridges on the Divinity Collection knob creates a defined finger contact area, which helps users get a positive grip when opening heavier cabinet doors or deep drawers repeatedly.
• The 1-1/4 inch (32 mm) knob diameter provides a balanced footprint on typical cabinet rails and drawer fronts, so the hardware looks proportional without crowding narrow frame sections.
• The 1-3/8 inch (35 mm) projection sets the hand slightly off the cabinet face, reducing contact with finished surfaces during pulls and helping limit smudging around the hardware area.
• The pewter finish offers a softer metallic tone that pairs well with both light and dark cabinet finishes, giving flexibility when matching existing hinges or other decorative hardware.
• The 1/2 inch (13 mm) base diameter focuses the load on a compact bearing surface, helping the knob sit cleanly on the door or drawer front without overshadowing narrow stile widths.
• The zinc die-cast construction provides a solid-feeling pull point, supporting regular cabinet use in kitchens, baths, or storage areas where hardware sees frequent operation.

Cabinet Knob Mounting And Fit Details

This Amerock 1-1/4 inch cabinet knob uses an 8-32 x 1 inch screw size, which matches common cabinet knob threading for straightforward installation into standard bored fronts. The 1/2 inch base diameter centers the load around the mounting hole, helping the knob seat securely against the cabinet surface. With its 1-3/8 inch projection, the knob stands off the face enough to clear typical door and drawer front thicknesses while keeping the pull within a compact reach zone. The 1-1/4 inch overall diameter aligns well with regular 3/4 inch thick cabinet fronts, so the knob appears properly scaled without dominating the panel. Using a consistent BP5261PWT part number across a job helps maintain uniform appearance and fit on every opening in the run.

Using The Amerock Divinity Knob In Work

Where The Amerock Divinity Pewter Knob Fits

The Amerock Divinity pewter knob belongs to the Divinity Collection of cabinet hardware, which is designed for decorative cabinet applications. Its 1-1/4 inch (32 mm) diameter works well on cabinet doors where a single knob is centered on the stile, giving enough leverage for everyday use. On drawers, the same diameter provides a compact pull point that suits smaller and medium-width fronts without overwhelming the face. The pewter finish supports use on projects where a subdued metal tone is preferred, such as painted shaker doors or stained wood with visible grain. Because the knob is categorized as decorative hardware and knobs, it fits into layouts where visual detail and consistent styling across multiple openings are important. The zinc die-cast construction suits indoor cabinetry environments where hardware experiences repeated handling throughout daily routines.

Details That Support Consistent Cabinet Results

The BP5261PWT manufacturer part number identifies the Amerock Divinity Series pewter 1-1/4 inch knob as a specific item, which simplifies repeat ordering for multi-room or phased projects. The stated 1-3/8 inch (35 mm) projection provides a predictable stand-off distance, helping installers line up door reveals and appliance clearances with confidence when laying out hardware positions. With an 8-32 x 1 inch screw size, the knob works within a familiar fastener standard for cabinet hardware, which streamlines drilling patterns and speeds up repetitive installation across a bank of doors. The 1/2 inch (13 mm) base diameter gives a precise contact ring on the cabinet surface, supporting neat alignment when tightening the knob so it sits square to the face. The zinc die-cast material and Divinity Collection swirl of stacked ridges combine to create a tactile gripping surface, aiding users in getting a secure pull even on heavier cabinet doors during daily operation.

Common Questions About BP5261PWT Cabinet Use

Select This Knob For Coordinated Cabinet Runs

The Amerock Divinity Series pewter 1-1/4 inch diameter knob BP5261PWT pairs zinc die-cast construction with a swirl of stacked ridges for functional grip and visual detail. Its 1-3/8 inch projection, 1/2 inch base diameter, and 8-32 x 1 inch screw size support consistent mounting across cabinet doors and drawers. The pewter finish and Divinity Collection styling allow this knob to carry a unified look through kitchens, baths, and storage areas that rely on decorative hardware and moldings.