
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pasco 120 grit 3 x 50yd sanding roll is a drum sander roll designed for general purpose sanding, so it handles a wide range of smoothing and cleanup tasks on the same machine without constant abrasive changes. The roll uses aluminum oxide abrasive, which cuts consistently during sanding, helping you maintain an even scratch pattern across larger surfaces. The abrasive is bonded to heavy duty X-weight cloth, giving the roll a rugged backing that stays stable when wrapped on drum sanders. This X-weight cloth backing provides extra strength where a stronger backing is needed, which supports longer runs under drum pressure. The roll is 3 inches wide, so it covers a useful sanding width in each pass while still tracking reliably on typical drum setups. The 50 yard length gives extended sanding reach from a single roll, which reduces changeovers during repetitive shop work.
This Pasco drum sander roll is sized at 3 inches wide, so it matches drum sanding setups that accept that width and keeps the abrasive tracking consistently along the drum face. The 50 yard length supplies a long strip of abrasive for multiple drum wraps, which supports ongoing work in production or shop environments. Aluminum oxide abrasive on the roll delivers dependable cutting action under drum speed, so each wrap performs predictably during successive passes. The heavy duty X-weight cloth backing is built for applications where a stronger backing is needed, so it supports tensioning on the drum without the backing breaking down prematurely. This X-weight cloth structure keeps the abrasive layer supported as it conforms to the drum, helping maintain contact with the work surface throughout the sanding cycle.
This Pasco drum sander roll for general purpose sanding fits into drum sanding workflows that call for 3 inch wide abrasives, so it can be used across repeated runs of similar parts. The 120 grit abrasive level positions the roll for intermediate sanding tasks, where material needs to be smoothed without removing excessive stock between passes. Aluminum oxide on the surface is suitable for general purpose sanding, so it adapts to varied day-to-day shop work using a single abrasive type. The 50 yard roll format supports longer production runs, since multiple drum wraps can be cut from the same roll. The heavy duty X-weight cloth backing holds up where a stronger backing is needed, so the roll is suited to situations where drum pressure and continuous feed place extra demand on the abrasive support layer.
The heavy duty X-weight cloth backing on this roll provides structural strength under drum tension, so the abrasive stays stable when stretched around the drum surface. This stronger backing matters in applications where lighter backings could distort, because X-weight cloth resists stretching and wrinkling during use. The firm backing keeps the aluminum oxide abrasive presented evenly to the work, which supports consistent sanding results across the width of the drum. In workflows that require many consecutive passes, the X-weight cloth design helps the roll handle repeated cycles without backing failure. When a stronger backing is needed, this X-weight cloth construction allows the abrasive to stay effective under the combined load of pressure, speed, and feed typical of drum sander operations.
This Pasco drum sander roll is described for general purpose sanding, so it suits a broad range of everyday smoothing and surface preparation tasks on drum sanders.
The 120 grit rating places this roll in a general purpose range, so it balances material removal with a finer finish suitable for intermediate sanding stages.
The 3 inch width matches drum sanding setups designed for that width, so the abrasive tracks across the drum face without overhanging the working surface.
The heavy duty X-weight cloth backing supplies a stronger backing where needed, so it supports tension and pressure on drum sanders during extended sanding runs.
The aluminum oxide abrasive provides consistent cutting during sanding, so surfaces are worked evenly across multiple passes on the drum sander.
The 50 yard roll length offers ample abrasive for multiple drum wraps, so ongoing sanding tasks can be handled from the same roll with fewer changeovers.
This Pasco 120 grit 3 x 50yd sanding roll combines a drum sander roll format, aluminum oxide abrasive, and heavy duty X-weight cloth backing, so it is structured for general purpose sanding where a stronger backing is needed. The 3 inch width and 50 yard length together support drum sander setups that benefit from extended abrasive length and stable tracking on the drum. For general purpose sanding tasks that call for 120 grit performance on a drum sander, this Pasco abrasive roll offers a focused option ready to support ongoing shop work.
Sold In: 1 Roll
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Roll | PI3ACR150 Mfr# RL3X50YD150XW341 | Pasco Sanding Roll 3" x 50 yd 150 Grit Aluminum Oxide X-Weight Cloth RL3X50YD150XW341 |