
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Lavi stainless steel combination bracket 1-1/2 anchors a bar or foot rail firmly to the floor, so the rail resists movement when used in high-traffic areas. As a floor bracket, it supports a 1-1/2 inch diameter rail, which keeps layout planning straightforward when matching common bar rail sizes. The bracket is part of the Lavi Industries bar and foot railing and accessories line, aligning it with typical commercial and hospitality bar installations. This configuration keeps the rail consistently elevated, which helps maintain a uniform toe-height along a bar front. Because this is a combination bracket, it ties the rail to the floor at a single point, which simplifies the structural role of the fitting in the overall railing run.
This floor bracket configuration is intended to secure a 1-1/2 inch bar or foot rail to the floor plane, which helps keep the rail stable when people rest their feet on it. Because four foot spacing between brackets is recommended, installers can mark floor locations at these intervals to create a consistent line of support. The bracket is part of a bar and foot railing system, so it serves as one of the structural points that carry load from the rail down to the floor. This bracket is sold with screws, which allows the fasteners to tie the base directly into the floor surface during installation.
This Lavi Industries floor bracket is used in bar and foot railing applications where a 1-1/2 inch diameter rail is specified, aligning the fitting with common bar rail tubing. Its role as a floor-mounted support makes it suitable wherever the rail needs to stand off slightly from the bar face while transferring load to the floor. Because the bracket falls under bar and foot railing and accessories, it fits naturally into bar fronts, service counters, or similar runs where a dedicated foot rail is part of the design. The selection between Bright Brass and Satin Stainless Steel lets the bracket visually match either brass-focused or stainless-focused bar interiors, so the support hardware can track the look of the rail and other visible fittings without mixing unrelated finishes.
The 1-1/2 inch rail size specification helps keep alignment predictable, since each bracket seats the same diameter tube, reducing fit variation along a straight run. Using the recommended four foot spacing between brackets distributes the rail support at regular intervals, which helps limit deflection along typical bar-length spans. The choice of a solid brass body for the Bright Brass version provides a single-metal construction under the finish, which keeps the visible surface and core material aligned. For projects using the Satin Stainless Steel option, the 304 stainless steel composition gives a uniform stainless material from bracket body through finish, which supports a consistent stainless look along the rail line. The manufacturer part number 44-400/1H identifies this specific floor bracket model within the Lavi Industries system, which helps installers match it with other Lavi bar and foot railing components during planning or reorders.
The Lavi 44-400/1H floor bracket is designed for a 1-1/2 inch diameter rail, which helps installers pair it directly with 1-1/2 inch bar or foot rail stock.
The floor bracket has a recommended four foot spacing between brackets, giving a straightforward layout reference when planning support points along the rail.
The Bright Brass version is made of solid brass, while the Satin Stainless Steel version is made of 304 stainless steel, so each finish corresponds to its base metal.
This bracket is used in bar and foot railing applications, where it mounts to the floor to support a 1-1/2 inch rail along the front of a bar or counter.
The Satin Stainless Steel version uses 304 stainless steel, providing a stainless appearance suited to bar interiors and rail systems that use stainless rail components.
The manufacturer part number 44-400/1H uniquely identifies this floor bracket, helping installers specify or reorder the exact Lavi Industries model used on a project.
The Lavi stainless steel combination bracket 1-1/2 is purpose-built for bar and foot railing work, supporting a 1-1/2 inch rail from the floor. With Bright Brass solid brass and Satin 304 stainless steel options, it aligns both structurally and visually with common bar rail builds. The recommended four foot spacing between brackets simplifies layout for long runs. For bar fronts or counters using 1-1/2 inch rail, this Lavi Industries floor bracket gives a defined, repeatable way to support the rail along the floor line.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BC400-1H Mfr# 00-400/1H | Lavi Bright Brass Combination Bracket 1-1/2" D, 00-400/1H | ||||
Sold in: 1 Each | BC400-2 Mfr# 00-400/2 | Lavi Bright Brass Combination Bracket 2" D, 00-400/2 | ||||
Sold in: 1 Each | BC400-2SS Mfr# 44-400/2 | Lavi stainless steel combination bracket 2 D floor |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | BC201 Mfr# 00201 | Lavi Metal Adhesive D, 00201 | ||||
Sold in: 1 Each | BC110-144SS Mfr# 44-A110/12 | Lavi stainless steel railing 1-1/2 x 144 bar rail | ||||
Sold in: 1 Each | BC110-48SS Mfr# 44-A110/4 | Lavi stainless steel railing 1-1/2 x 48, 44-A110/4 | ||||
Sold in: 1 Each | BC110-72SS Mfr# 44-A110/6 | Lavi Stainless Steel Railing 1-1/2 D x 72 L | ||||
Sold in: 1 Each | BC110-96SS Mfr# 44-A110/8 | Lavi stainless steel railing 1-1/2 D x 96 L |