
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Lavi Stainless Steel Railing 1-1/2 D x 72 L describes a 6 foot length of 1-1/2 inch diameter bar railing that creates straight, continuous bar or foot rail runs across cabinetry or bar fronts. The product is specified at 72 inches long, so layout for standard bar sections and repeatable cut plans is straightforward. The rail wall is 3/64 inch thick, which provides a solid tube profile while still allowing clean cutting and end prep with appropriate metalworking tools. The satin stainless steel option is made from 304 stainless steel, giving the rail a rust resistant material base for typical indoor bar and service environments. The bar railing is identified by manufacturer part number 44-A110/6 from Lavi Industries, so matching additional rail segments and fittings to this specific series remains consistent across projects.
This Lavi stainless steel bar rail is part of a system with three diameters available - 1 inch, 1-1/2 inch, and 2 inch - and four lengths available - 4 foot, 6 foot, 8 foot, and 12 foot, so installers can select sizes that match grip preference and span requirements across a project. The 1-1/2 inch by 72 inch size fits mid-range bar runs where a 6 foot segment aligns well with cabinet modules or wall breaks. Rust resistant material in the satin stainless option keeps the installed rail looking consistent along its length in service areas where spills are frequent. Bar railing sleeves using an inside friction fit join sections so the installer can build longer continuous rails from multiple 6 foot pieces while keeping the outer surface visually uninterrupted.
This Lavi Industries bar and foot railing length sits within the builders hardware category for bar and foot railing, so it is suited to front-of-house bar faces and similar counter runs. The 1-1/2 inch diameter works well when a standard bar rail feel is required along commercial or residential bar installations. With three diameters available in the broader line, installers can keep a consistent Lavi Industries system across upper bar edges and lower foot rails while choosing the 1-1/2 inch size where a balanced grip and visual scale is needed. The 72 inch length allows this rail to be placed along bar fronts that fall between 4 and 8 feet, reducing the amount of cutting compared with longer stock when the design calls for a near full-length piece.
The 3/64 inch thick tube wall on this rail gives enough material for a solid feel under load, which supports bar users leaning or resting feet without the thin flex often found in lighter tubing. Because the satin stainless steel finish is based on 304 stainless steel, the rail keeps its rust resistant characteristics even where condensation from glasses or mopping water regularly contacts the lower foot rail or bar edge. Bar railing sleeves designed with an inside friction fit connect two rail lengths from within the tube, so the joint remains visually clean and aligned, which supports long, straight rail assemblies along extended bars. The availability of 4, 6, 8, and 12 foot lengths in the same system lets installers mix sizes to match room dimensions while keeping joints over less visible sections of the millwork. The choice between bright brass and satin stainless steel finishes across the overall offering lets designers coordinate this rail size with surrounding fixtures, maintaining the same Lavi Industries geometry while changing only the metal appearance.
The Lavi stainless steel railing is 1-1/2 inch in diameter and 72 inches long, so it functions as a 6 foot bar or foot rail segment for straight runs.
The satin stainless steel finish is made of 304 stainless steel, which provides a rust resistant base metal for bar and foot rail locations with regular moisture contact.
The railing is 3/64 inch thick, giving a sturdy tube wall that resists typical dents while still allowing practical cutting and fitting in the field.
Bar railing sleeves use an inside friction fit to tightly connect two lengths, which keeps the outer surface smooth while aligning sections into a continuous run.
The web description notes two finishes across the line: bright brass, made of solid brass, and satin stainless steel, made of 304 stainless steel.
The series offers three diameters - 1 inch, 1-1/2 inch, and 2 inch - and four lengths - 4, 6, 8, and 12 feet, covering varied bar layouts.
This Lavi Industries stainless steel bar and foot railing in 1-1/2 inch diameter and 72 inch length provides a defined, rust resistant tube for straight bar fronts where a 6 foot section fits the layout. The combination of 3/64 inch wall thickness and 304 stainless steel in the satin stainless option creates a solid rail suited to busy serving areas. When used with friction fit bar railing sleeves from the same system, this length helps build long, continuous runs from standard segments. For projects calling for a consistent Lavi bar and foot railing system with defined diameters and lengths, this 44-A110/6 piece forms a dependable base segment.
Sold In: 1 Each