Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Lavi bright brass connector sleeve gives you a simple way to join two lengths of bar railing into a clean, continuous run. This bar railing sleeve is designed for bar and foot railing projects where a tight, aligned joint matters for both appearance and comfort. The connector sleeve has an inside friction fit, so it grips the railing from the inside rather than relying on external clamps. The sleeve is made for 2 inch diameter railing, matching common bar and foot rail layouts. Lavi Industries identifies this connector sleeve with manufacturer part number 00-830/2, so it can be specified consistently across drawings and orders. As part of the bar and foot railing and accessories category, this bright brass connector works as a joining component within a coordinated railing system.
This connector sleeve uses an inside friction fit, so each rail length slides over the sleeve until the joint is centered, creating a tight interior grip along the 2 inch diameter. That friction fit design allows rail sections to be joined without external clamps at the joint, which supports a smooth outer surface where feet or hands contact the railing. Because the connector is sized for 2 inch bar railing, installers can align cuts and joints to take advantage of the sleeve length while planning straight runs. The bright brass connector operates as a concealed internal part of the assembly, so its fit and size directly influence how true and continuous the finished rail appears along the bar.
This connector sleeve is part of bar and foot railing and accessories, so it is intended for use wherever two straight lengths of bar rail need to meet in line. The 2 inch diameter sizing means it works within railing layouts designed around that diameter, tying adjacent sections together in a straight path. Because the bar railing sleeves have an inside friction fit, the connector sits inside the rail itself, so the outer surface of the bar or foot rail remains visually uninterrupted at the joint location. In bar or counter-front runs that use matching bright brass rail, the connector sleeve supports a consistent look by pulling the jointed pieces into one continuous visual element along the length.
The inside friction fit of this connector sleeve creates a tight interior connection between rail sections, so each joint can be pulled square and held by the grip of the sleeve. That friction-based hold helps installers achieve similar joint tightness from one connection to the next, supporting repeatable results across a long bar run. With the connector sized for 2 inch railing, each joint is based on a known internal dimension, which streamlines cutting and layout when multiple sections must align. The Lavi bright brass connector sleeve 00-830/2 serves as a reliable internal joining element, so once the sleeve is seated inside matching 2 inch rail, the exterior joint line can be finished to match the rest of the bright brass bar or foot rail installation.
The connector sleeve is part of bar and foot railing and accessories, so it is used to join sections of bar or foot rail in those railing layouts.
The bar railing sleeves have an inside friction fit, so the sleeve fits inside each rail section and grips the interior surfaces to hold the joint tightly together.
The connector sleeve is described as 2 inch diameter, so it is designed for railing layouts using 2 inch bar or foot rail sections.
This connector sleeve is manufactured by Lavi Industries, providing a consistent source and reference brand for bar and foot railing projects.
The part number 00-830/2 identifies this specific Lavi bright brass connector sleeve, which helps match it to drawings, quotes, and repeat orders.
In a straight bar run, the connector sleeve slides into the ends of two 2 inch rail sections, and the inside friction fit pulls those sections into a tight, aligned joint.
The Lavi bright brass connector sleeve 2 inch D, part number 00-830/2, provides an inside friction fit joint for 2 inch bar and foot railing layouts. Using this connector sleeve lets each straight rail connection rely on a concealed internal joiner that supports a clean exterior line. For projects built around bright brass 2 inch rail, this bar railing sleeve gives installers a defined joining point that aligns with the overall bar or foot rail design.
