Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Lavi bright brass railing 1 inch x 48 inch is a solid brass bar rail section designed for bar and foot railing applications where a defined 4 foot run is needed. The 1 inch diameter creates a compact profile that suits tighter bar fronts or lighter visual lines, while still providing a consistent gripping and resting surface along the edge. The 48 inch length works as a standalone run or as one segment in a longer assembly, giving layout flexibility on straight sections. The rail wall is 3/64 inch thick, so the tube stays light enough to handle during layout yet maintains a substantial feel once supported by the chosen brackets. The bright brass finish presents the solid brass material directly, which matters anywhere a continuous metallic appearance is part of the bar design. This railing is part of a bar and foot railing and accessories system, so it plays the primary linear role while other matched components handle support and transitions.
This Lavi Industries brass bar rail uses its 1 inch outside diameter as the primary interface with bar rail brackets and related bar and foot railing accessories, so all support components are chosen around that size. The 48 inch section length works well when supports are laid out in repeating patterns, allowing joints to land where sleeves and brackets can share space. Bar railing sleeves are designed with an inside friction fit, which means they locate inside the tube to join two pieces while gripping both interior surfaces to hold alignment. That friction fit connection keeps the outside profile clean and maintains a smooth transition for feet or hands across section joints, supporting a continuous feel along longer bar runs.
This Lavi bright brass railing 1 inch x 48 inch fits into bar and foot railing and accessories layouts where a smaller diameter is preferred along cabinets or bar faces. In bars, restaurants, or similar interiors that use coordinated metalwork, the bright brass finish works with matching bar components to create a continuous visual line across the front of the bar. The 4 foot length helps when designing around standard casework or bar panel modules, allowing rail sections to sit in front of each module with joints placed at logical breaks. Since the tubing is solid brass in this finish, exposed field-cut ends still present the same base material as the factory-cut ends, which helps when a cut end is visible near a return, wall, or termination point. The 3/64 inch thick tube balances weight and rigidity, so the rail cooperates with mounting hardware to keep the run straight between supports.
The 1 inch bar railing sleeve fit is based on an inside friction fit connection, which matters when multiple 4 foot sections are joined into a longer straight run. The sleeve locates inside both tube ends, holding them together so the outer diameter stays uniform and the joint feels smooth as feet or hands pass across. This interior connection method lets the installer focus on aligning the outside of the rail to the bar front without external clamps at each joint. In practice, the 48 inch section length and friction-fit sleeves allow long, straight assemblies to be broken into manageable pieces for handling, while still behaving as a single continuous rail when connected. Because the rail is described as rust resistant, the joints and exposed metal surfaces support ongoing use in typical bar environments where moisture contacts the bar front, helping the assembly maintain its role as a reliable foot or hand rest along the bar.
This Lavi bright brass railing section is 1 inch in diameter and 48 inches long, so it functions as a 4 foot bar or foot rail segment within a railing layout.
This bar rail is made of solid brass in a bright brass finish, so any exposed surfaces or cut ends show consistent brass material and appearance along the run.
The brass bar rail has a 3/64 inch thick wall, giving a balance of manageable weight and stiffness that supports straight runs between properly positioned supports.
Multiple bar rail sections are joined using bar railing sleeves with an inside friction fit, which tightly connects and aligns two tube lengths to form longer straight runs.
This product is listed under bar and foot railing and accessories, so it serves as the main rail component within a coordinated bar railing system layout.
The web description notes that the line is available in bright brass made of solid brass and satin stainless steel made of 304 stainless steel, defining two material choices in the same family.
The Lavi bright brass railing 1 inch x 48 inch offers a defined 4 foot length, a compact 1 inch diameter, and a solid brass bright brass finish, all described for bar and foot railing and accessories use. The 3/64 inch thick, rust resistant tube and the friction-fit sleeve connection method support straight, continuous runs made from multiple sections. For projects built around brass metalwork on bar fronts, this rail section provides the primary linear element to match with compatible supports and fittings. Use this specific size where a controlled projection, even 4 foot spans, and a coordinated bright brass appearance are central to the bar rail layout.
Sold In: 1 Each
