Lavi Bright Brass Railing 1-1/2" D x 48" L, 00-A110/4

Lavi Bright Brass Railing For Bar Footrests

Lavi Bright Brass Railing 1-1/2 D x 48 L is a solid brass bar and foot rail section designed for bar and counter applications where a defined footrest or boundary is needed. The 48 inch length lets you span a typical bar segment with a single continuous piece, which simplifies layout when you are lining up multiple sections along a run. The 1-1/2 inch diameter creates a substantial round profile that is comfortable underfoot in high-use bar and counter areas. This railing is 3/64 inch thick, so the tubing wall has enough material for a sturdy bar rail while still working well with standard bar railing sleeves and fittings sized for this dimension. The bright brass finish presents the classic warm metal look that many bar builds and remodels are planned around, helping the rail tie visually into other brass details on the project.

Key Brass Bar Rail Details That Matter

• The railing is made of solid brass, so the material runs through the wall thickness, which is useful when cutting to length or drilling because the exposed edges maintain the same brass appearance.
• This bar railing is 3/64 inch thick, providing a defined tube wall that supports a sturdy feel when installed while remaining compatible with standard fittings designed for this wall gauge.
• The 48 inch length helps cover a common bar section with a single piece, which reduces the number of joints that need alignment along the run.
• The 1-1/2 inch diameter creates a consistent round profile that balances foot comfort with a size that works with typical commercial bar rail brackets and elbows sized for this dimension.
• The bright brass finish is one of the two finishes offered in this line, so it can be matched visually with other bright brass components from the same system.
• The railing is described as rust resistant, which supports use in typical indoor bar environments where moisture and spills are present around the foot rail area.

Bar Rail Fit, Length, And Joining Details

This Lavi Industries bar rail section measures 48 inches long, which helps when laying out bar fronts in four foot increments and aligning bracket spacing along each section. The 1-1/2 inch diameter sets the fit for elbows, brackets, and bar railing sleeves designed around this size, giving installers a clear reference when ordering matching components from the same product class. With a 3/64 inch thick tube wall, the rail accepts inside friction-fit bar railing sleeves that are sized for this dimension, creating tight connections between two 1-1/2 inch rails. Those sleeves use an inside friction fit to join lengths of railing, which means the connection is formed inside the tube, keeping the exterior surface visually continuous across the joint.

Using This Brass Bar Rail In Bar Projects

Where This 1-1/2 Inch Railing Performs Best

This Lavi Industries bright brass railing is part of a bar and foot railing product class, which positions it for use along bar fronts, counters, and similar footrest locations. The 1-1/2 inch diameter is sized for typical bar foot rail applications, giving patrons a comfortable round surface along the base of the bar. Because the railing is made of solid brass, it supports installations where the rail may be field-cut to hit specific wall returns or to break around casework transitions while keeping the same brass material visible on all exposed ends. The 48 inch length works well when bars are laid out in modules or when installers want shorter sections for handling and transport during fit-up on a jobsite. Rust resistant properties support service in indoor bar spaces where occasional mopping, spills, and foot traffic bring moisture near the rail.

Details Supporting Clean Joints And Repeatable Results

The 1-1/2 inch diameter and 3/64 inch wall thickness give clear dimensional targets when pairing this rail with bar railing sleeves, ensuring that inside friction-fit connectors designed for this size can seat properly within the tube. Bar railing sleeves for this system have an inside friction fit, so when two 48 inch or other length rails meet, the sleeve grips from the inside to hold the joint tight and maintain alignment along the run. The solid brass construction means that when installers cut a section to adjust for exact bar length, the internal and external surfaces present the same material, which can simplify finishing the cut end to a clean appearance. Using multiple 48 inch rails connected with these sleeves allows long bar runs to be assembled in consistent sections while keeping joint visibility low because the connection occurs inside the tube.

Common Questions About This Lavi Brass Rail

Select This 48 Inch Brass Rail For Your Run

This 1-1/2 inch diameter, 48 inch long Lavi Industries bright brass bar rail gives installers a defined, rust resistant, solid brass section for bar and foot railing layouts. The 3/64 inch wall thickness and solid brass construction support cutting and joining with friction-fit sleeves sized for this system. When a bar project calls for a bright brass look with consistent dimensions across rail sections, this piece serves as a core component around which brackets, elbows, and sleeves from the same bar and foot railing class can be planned.