3 inch Traditional Designs Cup Pull describes a Schaub and Company pull designed around a 3 inch center to center layout, which sets the mounting hole spacing and lets existing 3 inch bores be reused on replacement work. The Traditional Series designation ties this pull into a classic decorative hardware line, helping cabinets and furniture stay visually consistent across doors and drawers. Solid brass construction forms the body of the pull, creating a dense feel in hand and a substantial material base for everyday drawer and door use. The oil rubbed bronze finish defines the surface color and sheen, bringing a darker tone that suits traditional and transitional cabinet layouts. A 4-5/8 inch overall length means the cup extends past the mounting points, covering previous outlines or finish marks around older pulls on many cabinet faces.
The 3 inch center to center layout on this Traditional Series solid brass cup pull fixes the mounting hole distance, which lets it sit cleanly on common factory-bored cabinet fronts. The 1 inch projection keeps the grip close to the face, shaping how far handles extend into walkways or tight clearances around islands. Its 4-5/8 inch overall length works with standard drawer rail heights, helping the pull visually balance wider fronts without overwhelming narrow ones. A 1-3/8 inch width dimension controls the vertical footprint, which matters when aligning multiple pulls along rails or matching existing hardware proportions across an entire run of cabinetry.
This Schaub and Company Traditional Series cup pull sits in the Decorative Hardware & Moldings category, so its design targets visible cabinet and furniture faces where hardware sets the finished look. The oil rubbed bronze finish supports traditional styling on framed cabinets, furniture pieces, and built-ins, tying in with other bronze hardware in the same room. Its 3 inch center to center measurement makes it suited to residential and light commercial cabinets already drilled on that standard, keeping the layout consistent across banks of drawers. With 4-5/8 inches of length and 1-3/8 inches of width, the pull displays well on medium-width drawers, helping it read correctly in proportion on typical kitchen and bath fronts.
The Schaub 731-10B cup pull identifier ties this piece to a specific part number, which matters when matching existing installations or ordering multiples for a uniform run of hardware. The solid brass construction supports repeatable performance when the same pull is used across many drawers, because the material and shape remain consistent from one location to the next. A 3 inch center to center measurement simplifies layout on new fronts that follow this drilling standard, helping rows of pulls line up accurately. The 1 inch projection keeps each pull set to the same stand-off distance, which creates an even profile line down a cabinet bank. The combination of oil rubbed bronze finish, Traditional Series styling, and defined dimensions supports repeatable visual alignment from one cabinet section to another.
The 3 inch Traditional Designs Cup Pull has a 3 inch center to center, 4-5/8 inch length, 1 inch projection, and 1-3/8 inch width, which together define its footprint and clearance on cabinet fronts.
The Schaub and Company 731-10B pull is described as solid brass, giving it a substantial feel and a stable base for the oil rubbed bronze finish on working cabinet doors and drawers.
This cup pull is finished in oil rubbed bronze, which sets a dark tone that coordinates with other bronze decorative hardware across a cabinet or furniture installation.
The 3 inch center to center dimension matches a common drilling standard, so the pull aligns with many existing cabinet holes and simplifies spacing on new layouts using that pattern.
The 1 inch projection indicates how far the pull extends from the cabinet face, affecting hand clearance and how far handles reach into walk paths near doors, aisles, or islands.
This pull is listed in the Traditional Series from Schaub and Company, placing it within a coordinated group of decorative hardware suitable for classic cabinet styles.
This solid brass oil rubbed bronze cup pull uses a 3 inch center to center layout, so it works with that common cabinet drilling pattern during new work or replacements. Its 4-5/8 inch length, 1-3/8 inch width, and 1 inch projection define how it will sit and feel on the face. With Traditional Series styling from Schaub and Company, this piece supports cohesive decorative hardware plans across multiple cabinets and rooms when the same look and dimensions are required.