Youngdale 3/8 Inset Pin Hinge For Clean Fronts
Youngdale 3/8 inset pin hinge is a free swinging, semi-concealed pin/knife hinge in bright nickel that supports 3/8 inch inset cabinet doors where hardware should stay out of frontal view. The hinge design is classified as a semi-concealed hinge, so the working parts stay discreet while still allowing practical access for mounting and adjustment at the case edge. The bright nickel finish provides a clean, neutral metal look that works well in many cabinet styles and helps visually match other bright nickel hardware on the project. As a free swinging hinge, this Youngdale model lets the door move smoothly through its opening range without built-in soft close resistance, which suits doors that need to move freely on face frame cabinets.
Key Youngdale Hinge Details For Cabinet Work
- Youngdale self-locking pin hinge construction holds the hinge position during use, which helps door alignment stay consistent once set on the cabinet.
- The hinge is completely hidden from frontal view when the door edge is a minimum of 7/16 inch thick, so the cabinet face shows door and reveal lines rather than hinge hardware.
- Door wings are double slotted for easy door adjustment, giving some lateral or vertical play during install to fine-tune reveals and reduce rework on cabinet alignment.
- This hinge is part of Youngdale semi-concealed hinges, so part of the hinge stays visible only inside the cabinet, helping keep the exterior appearance clean while still offering a secure mounting method.
- The bright nickel finish provides a metallic appearance that coordinates with other bright nickel components, which helps maintain a consistent look across cabinet hardware runs.
Hinge Fit, Screw-On Mounting, And Door Adjustment
This Youngdale manufacturing corporation hinge uses a screw-on mounting style, with the hinge fastened using eight #6 x 5/8 inch screws, so the installer works with a familiar screw size and length on typical cabinet materials. The screw-on method allows the hinge leaf and pin assembly to be secured directly to the door and cabinet, which supports a straightforward drilling and driving sequence with standard woodworking tools. Because the door wings are double slotted, the hinge can be shifted slightly during screw tightening, which helps set uniform gaps between double doors or between door and face frame. The 3/8 inch inset design means the door overlays the face frame opening partly while sitting 3/8 inch into the opening, an arrangement many cabinetmakers use for traditional framed cabinet layouts.
Using This Semi-Concealed Hinge On Face Frames
Where This Youngdale Hinge Works Best
This Youngdale free swinging 3/8 inch inset pin/knife hinge is suited to framed cabinet layouts using 3/8 inch inset doors where a semi-concealed look is preferred. When the door edge is at least 7/16 inch thick, the hinge stays completely hidden from frontal view, so the door and face frame define the visual line of the installation instead of the hinge hardware. This makes the hinge appropriate for installations where the inside of the cabinet can show working hardware, yet the outside should read as clean, with only consistent reveals between double doors or between door and frame. On jobs using bright nickel decorative hardware, this bright nickel hinge keeps interior metal finishes visually related during service or door swing.
Why The Opening Angles And Adjustability Matter
The opening angle of this hinge changes with the face frame width and door setup, which affects how far the door can swing during daily use. With 3/4 inch thick double doors on a 3/4 inch face frame, the hinge provides an opening angle of 135 degrees, giving good access to the cabinet interior while keeping the doors controlled against adjacent components. With 3/4 inch thick double doors on a 1-1/2 inch face frame, the opening angle increases to 165 degrees, which allows the doors to swing farther out of the way on wider face frames. The double slotted door wings simplify dialing in these conditions, because the door position can be shifted slightly during installation for even reveals, reducing the need for re-drilling. The self-locking pin hinge function helps the hinge hold its operating position over time, supporting repeatable movement of the door within the intended opening range on both narrow and wide face frames.
Common Questions About Youngdale 4DS-200.NI Hinges
What type of cabinet door layout suits this hinge?
The Youngdale 3/8 inset pin hinge is designed for 3/8 inch inset doors on face frame cabinets, so it fits layouts where the door sits partially in the opening.
How hidden is the hinge from the front of the cabinet?
The hinge is completely hidden from frontal view when the door edge is a minimum of 7/16 inch thick, so the cabinet front shows only the doors and reveals.
What does the self-locking pin hinge feature do?
The Youngdale self-locking pin hinge design helps the hinge hold its position during repeated door movement, which supports stable alignment over time.
How do the double slotted door wings help installation?
The double slotted door wings provide room for adjustment while tightening screws, letting the installer fine-tune gaps and reveals without starting over.
What opening angles can this hinge provide?
With 3/4 inch thick double doors on a 3/4 inch face frame the hinge opens to 135 degrees, and on a 1-1/2 inch face frame it opens to 165 degrees.
What finish is available on the 4DS-200.NI hinge?
The Youngdale 4DS-200.NI hinge has a bright nickel finish, providing a neutral metallic look that coordinates with bright nickel cabinet hardware.
Choose This Hinge For 3/8 Inset Door Projects
The Youngdale free swinging 3/8 inch inset pin/knife hinge in bright nickel gives cabinet shops and serious DIY users a semi-concealed hinge that stays hidden from the front when used with a 7/16 inch minimum door edge thickness. Its screw-on mounting, self-locking pin hinge construction, and double slotted wings streamline hanging and adjusting 3/8 inch inset doors on face frame cabinets. For projects calling for bright nickel hardware and specific opening angles on framed cabinets, this Youngdale 4DS-200.NI hinge is a practical choice through Wurth Baer Supply.
