Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the 26 inch cabinet member from Knape and Vogt's 8400 series — a side-mount ball bearing drawer slide built for full extension, rated 100 lb per pair, with a hold-in anti-rebound detent and a zinc finish. It ships as a single cabinet member in a bulk pack, suited for shops ordering slide components to match an existing inventory of 8400-series parts.
At 26 inches, this cabinet member suits deeper cabinets — pantry pull-outs, shop utility drawers, and base cabinets built to accommodate a full-depth drawer box. Full extension means the entire drawer clears the cabinet opening, so nothing hides at the back. The hold-in detent makes it a reliable choice in shop and office settings where a loaded drawer should stay closed until deliberately pulled, not drift or rebound open after being pushed shut firmly. The 100 lb per-pair rating covers the everyday demands of a pots-and-pans drawer or a drawer stocked with tools or binders.
The cabinet member is cold-formed steel with a zinc finish — the working standard for side-mount ball bearing slides in cabinetry. Zinc provides solid corrosion protection for indoor installations and stands up to daily cycling without flaking or binding. This is a functional finish, not a decorative one; the slide sits beside the drawer box and is mostly out of sight in use. For installations where the slide finish needs to match a specific cabinet interior color, the 8400 series is also available in ebony black and white.
Production cabinet shops and service operations are the natural buyers for a bulk-pack single cabinet member. When a drawer member fails or gets damaged on an existing 8400-series installation, replacing just the cabinet member rather than the full pair keeps the repair straightforward and the parts inventory lean. The non-handed design simplifies stocking — one part number covers every opening. The 8400 series mounts on the 32mm hole pattern used in frameless cabinet construction; in face-frame cabinets, add the matching KV rear mounting brackets, sold separately, to support the slide's back end. Side clearance is 1/2 inch per side, so the drawer box should be built 1 inch narrower than the cabinet opening.
This is a single cabinet member only, sold in a bulk pack. You will need the matching drawer members and, if not already on hand, additional cabinet members to make complete working pairs for your drawers.
The detent keeps the drawer closed after it is pushed shut, preventing it from bouncing back open. It is not a soft-close or a self-close feature — there is no spring pulling the drawer shut and no damper slowing it. The drawer stays wherever it is left until deliberately pulled or pushed.
Yes, but face-frame installations need rear support at the back of the slide. Add the KV series rear mounting brackets — sold separately — to provide that support. The brackets are series-specific, so use the ones matched to the 8400 series.
Build the drawer box 1 inch narrower than the cabinet opening — this leaves the required 1/2 inch of clearance on each side for the slide to operate correctly.
The cabinet's interior depth needs to accommodate the full 26 inch slide length plus any clearance behind the slide. Measure the interior depth before ordering to confirm the fit.
A bulk-pack cabinet member in a proven series means the shop keeps the right part on the shelf, repairs happen on the spot, and drawers go back to work without a full-pair order holding things up.
Sold In: 100 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 50 Each |  KV8400Q92-26 Mfr# 8400-92 26 | KV 8400 50-Pack 26" Hold-In/Anti-Rebound Side Mount Full Extension 100 lb Ball Bearing Drawer Member, Zinc, 8400-92 26 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  KV8402 Mfr# 8402 | KV 8400 Rear Mounting Bracket, Zinc, 8402 |
