Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
American Craftsman pull 96mm black from Berenson Corporation is a zinc die cast cabinet handle designed around a 3-3/4 inch (96 mm) center to center mounting pattern, so it lines up with standard drilling for many cabinet and drawer layouts. The 5-13/16 inch overall length provides a comfortable gripping area along the handle, which helps when operating wider drawers or heavier doors. A 1-3/8 inch projection sets the hand away from the cabinet face, giving clearance for fingers during daily use. The 7/16 inch width keeps the pull visually streamlined while still offering a defined edge to grab. Each end of the pull has a 3/4 inch base diameter that spreads contact on the cabinet surface, which supports stable mounting and a clean transition to the door or drawer front. The black finish creates a dark, uniform look across the handle that coordinates with other black decorative hardware components.
This Berenson American Craftsman Series pull uses a 3-3/4 inch (96 mm) center to center layout, so the two mounting holes sit on that fixed spacing for alignment with cabinet fronts. The pull body extends to a 5-13/16 inch overall length, allowing the handle to reach farther across the face of the door or drawer while the mounting points remain concentrated at the standard 96 mm distance. A 1-3/8 inch projection from the cabinet face supplies working room for fingers between the back of the pull and the surface, which helps during repeated opening cycles. The bases at each end measure 3/4 inch in diameter, creating round contact pads on the wood surface for stable seating. With a 7/16 inch width through the handle section, the pull feels slim in hand while still giving a defined gripping edge along its length.
The Berenson American Craftsman Series 3-3/4 inch (96 mm) center to center black pull is built for use on cabinet doors and drawers where a 96 mm hole pattern is desired. The 5-13/16 inch overall length lets this pull span a noticeable portion of the front, which suits many base and wall cabinets as well as midsize drawers. With a 7/16 inch width, the handle presents a narrow front profile that suits straightforward decorative hardware layouts. The 3/4 inch base diameter at each mounting point creates a defined footprint on the face, which visually anchors the pull on both flat and profiled fronts. The black finish allows this handle to coordinate with other black decorative hardware in the same space, supporting a unified appearance on multi-cabinet runs.
The defined 3-3/4 inch (96 mm) center to center dimension on this American Craftsman pull gives an exact measurement for drilling jigs and templates, which supports accurate, repeatable hole placement across a bank of doors or drawers. The pull uses zinc die cast construction, so each handle shares a consistent form factor that aids alignment when multiple pieces are installed side by side. A projection of 1-3/8 inch sets a predictable standoff from the cabinet face, which keeps finger clearance uniform across an entire installation. The 3/4 inch base diameter at each end frames the screw connection point, helping the pull seat evenly on the surface as the mounting fasteners are tightened. With its black finish, each handle presents a matching color tone, which maintains visual continuity when the same pull is repeated on several fronts throughout a project.
The Berenson American Craftsman Series pull has a 3-3/4 inch (96 mm) center to center dimension, so drilling and replacement layouts can follow that specific hole spacing on cabinet doors and drawers.
The American Craftsman 2052-155-P pull measures 5-13/16 inches in overall length, which affects how far the handle visually spans across a cabinet front while using the 96 mm mounting pattern.
The pull is made from zinc die cast material, creating a solid handle body that supports everyday cabinet and drawer operation in typical woodworking environments.
This Berenson American Craftsman pull projects 1-3/8 inches from the cabinet face, establishing consistent finger clearance behind the handle for opening doors and drawers.
Each end of the pull has a 3/4 inch base diameter and the handle section is 7/16 inch wide, shaping the contact area and slim profile across the cabinet front.
The American Craftsman 96mm pull has a black finish, giving it a uniform dark appearance that coordinates with other black decorative hardware on the same project.
The Berenson American Craftsman Series 3-3/4 inch (96 mm) center to center black pull pairs a defined 96 mm mounting layout with zinc die cast construction and a black finish, giving cabinet projects a consistent handle style. Its 5-13/16 inch overall length, 1-3/8 inch projection, and 7/16 inch width work together to shape grip feel and clearance on doors and drawers. When a job calls for black decorative hardware with a 96 mm center to center layout, this 2052-155-P pull from Wurth Baer Supply provides a clearly specified option ready to plug into cabinet drilling plans.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BQ2001-AI Mfr# 2001-1AI-P | Berenson American Craftsman Antique Iron 1-3/8" (35 mm) Diameter Knob, 2001-1AI-P |