KV8400 18" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Black Poly-Pack - 8400P EB 18

Knape And Vogt 8400 Drawer Slides For 18-Inch Drawers

Knape and Vogt 8400 drawer slides are 18 inch full extension, unhanded side mount ball bearing slides, so drawers can travel their full length and use the available cabinet depth. The 8400 series identity ties these slides directly to a known Knape and Vogt product family, which helps when matching existing hardware in shops or field replacements. The ebony black finish provides a dark, uniform look along the cabinet side, which matters in applications where slides may be visible in open-case or framed displays. A hold-in anti-rebound function is part of this slide design, so a closed drawer resists rolling back out once pushed shut, supporting cleaner lines on finished runs. The slides are classified as side mount drawer slides, so they work in layouts designed around side-mounted clearances rather than undermount or center-mount systems.

Practical Details That Support Drawer Performance

• The 18 inch length sets a defined drawer depth, which helps installers size drawer boxes so the slide uses the cabinet interior efficiently without projecting beyond the case.
• Full extension travel lets the drawer clear the cabinet front, which improves access to the back of the drawer and simplifies loading and layout in storage applications.
• Ball bearing construction supports smooth sliding action along the length of travel, which matters wherever drawers are opened repeatedly along a run of cabinets.
• The ebony black finish provides a dark surface along the case side, which supports a consistent appearance in darker interiors or display cabinetry.
• The slides are unhanded, so the same part works on left and right sides, which simplifies stocking and reduces part sorting time during installation.
• A ball retainer latch design is specified, which helps keep the ball bearings properly captured in the slide members during handling and mounting.

Side Mount Slide Dimensions And Mounting Fit

The specified side clearance for these slides is 1/2 inch plus or minus 1/32 inch on each side, which defines the drawer box width relative to the cabinet opening and supports a predictable fit. A slide height of 1-13/16 inch sets the required vertical space along the drawer side, which helps installers plan drawer side heights, cut lists, and notch layouts around the hardware. A 32 mm pattern is noted for the slide, which aligns the mounting holes with 32 mm system drilling so casework set up for that pattern can accept the slide without ad hoc hole placement. The manufacturer lists these as side mount slides, so they locate along the drawer sides rather than underneath, aligning with standard side mount drawer construction.

Using 8400P EB 18 Side Mount Slides In Projects

Where 18 Inch 8400 Series Slides Are Applied

The KV Model #8400 with 18 inch length is suited to drawer openings that accept an 18 inch side mount slide, so builders can plan cabinet depth and drawer length around that fixed dimension. The slides carry the 8400P EB 18 designation, which ties to Knape and Vogt documentation and simplifies identifying matching slides when expanding existing cabinet runs. A 1-13/16 inch height and 1/2 inch plus or minus 1/32 inch side clearance work well in cabinetry built around standard drawer side heights and typical clearances, which supports consistent drawer box sizing across a kitchen or shop layout. Because the slides are unhanded, they serve both left and right drawer sides in kitchens, baths, commercial casework, and shop storage, which keeps parts uniform across various installations. The ebony black finish suits darker cabinet interiors or fixtures where exposed hardware benefits from a dark tone.

Details That Support Repeatable Drawer Installations

The recommended fasteners are #7 x 1/2 inch Phillips truss head screws (BST1/2X7-2C), which points installers to a screw size and head style that seats properly in the slide mounting holes. Lever disconnect is specified on these slides, which allows the drawer member to separate from the cabinet member when the lever is actuated, making it easier to mount the slide parts to drawers and cases separately. A non-handed design means the same slide configuration mounts on either side, reducing layout confusion during repetitive installs and simplifying labeling at the bench. The 32 mm pattern ties slide mounting directly into 32 mm case drilling, which speeds production in shops running line boring or CNC layouts on that spacing. The side clearance tolerance of 1/2 inch plus or minus 1/32 inch each side provides a defined range for drawer box width, which helps reduce binding or racking when case openings vary slightly within that band.

Common Questions About Knape And Vogt 8400 Slides

Select Knape And Vogt 8400 Slides For 18-Inch Runs

The Knape and Vogt 8400P EB 18 slide combines 18 inch full extension travel, ball bearing construction, lever disconnect, and 1/2 inch plus or minus 1/32 inch side clearance, so it fits well into side mount drawer layouts aimed at full-depth access. The ebony black finish and 1-13/16 inch height support both appearance and planning around drawer side dimensions. For projects matched to the 8400 series and 18 inch length, choosing this slide keeps cabinet runs consistent in operation and drilling patterns.