Rev-A-Shelf 597 Chrome 3/4" Tray Organizer, 597-12CR-10
Description
Choose a Rev-A-Shelf tray divider
Rev-A-Shelf tray divider gives cabinet storage a simple way to separate baking sheets, platters, and other flat kitchen items. The Rev-A-Shelf 597 Series tray divider is a metal tray divider with a chrome finish and a 12 inch height. This pack is manufacturer part RS597-12CR-10 and is sold as a bulk pack of 10 dividers. Each divider is a single-piece cabinet tray organizer that mounts with four screw-on clips per divider, and the screws and clips are included. Buyers comparing RS597-12 and RS597-18 sizes should note that this specific rev a shelf tray organizer is the 12 inch chrome version. For shops, installers, and organized homeowners, this base cabinet tray divider format supports clean vertical storage where fixed separators are preferred.
See how this cabinet tray organizer helps
- Rev-A-Shelf 597 Series design - gives buyers a defined tray divider format for organizing flat items inside cabinetry.
- Single-piece divider construction - helps simplify layout because each divider installs as one formed piece rather than multiple assembled parts.
- Chrome finish - supports a clean metal look for cabinet interiors where appearance matters.
- 12 inch divider height - helps buyers match this tray organizer to cabinet interiors that suit a shorter divider profile.
- Four screw-on clips per divider - provides a clear mounting method for installers planning spacing and attachment points.
- Screws and clips included - reduces the need to source basic mounting hardware separately for installation.
- Bulk pack of 10 dividers - helps cabinet shops and larger projects order a full box for repeat installations.
- Base cabinetry organizer classification - signals that this product is intended for cabinet organization rather than decorative trim or door hardware.
Confirm cabinet tray organizer fit and contents
Key specs to confirm: This chrome tray divider is part of the Rev-A-Shelf 597 Series and has a verified height of 12 inches. It is a single-piece metal divider that mounts using four screw-on clips per divider. Before ordering, confirm your cabinet interior height, usable depth, divider spacing, and mounting surface location so the tray organizer fits the items you plan to store. If you are comparing RS597-12 and RS597-18 options, verify which divider height better matches your cabinet opening and the trays, platters, or boards being stored. Load details, compliance information, and any unlisted dimensional tolerances are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: This RS597-12CR-10 pack includes 10 chrome tray dividers, with screws and mounting clips included. Each divider uses four screw-on clips.
What to verify before ordering: Confirm cabinet interior measurements, planned divider spacing, whether the 12 inch height is appropriate, and whether a bulk pack of 10 matches your project quantity. Verify the mounting surface can accept the included screw-on clips and follow manufacturer installation guidance and local building requirements where applicable.
Compare metal tray divider use and install
Use a cabinet tray organizer for storage
A cabinet tray organizer is commonly used when stacked baking sheets, serving platters, cutting boards, or shallow pans become hard to reach. Instead of piling flat items on top of each other, a divider layout creates separate vertical slots so each item can be pulled out with less shifting. The Rev-A-Shelf 597 Series tray divider is built for that kind of cabinet organization. Because each unit is a single-piece divider, installers can plan a straightforward layout based on the width of the items being stored and the available cabinet interior.
This specific model is a chrome tray divider with a 12 inch height. That makes it relevant for buyers looking at RS597-12 sizing rather than RS597-18. If the cabinet opening is taller or the stored items need more vertical support, the buyer should compare the verified series options before purchase. The product data confirms that the series is available in 12 inch and 18 inch heights and in white or chrome finishes, but this listing is for the 12 inch chrome bulk pack. That distinction matters when a shop is standardizing installs across multiple cabinets or when a homeowner wants a consistent interior finish.
Installation planning is also practical. Each divider mounts with four screw-on clips, and screws and clips are included. That gives installers a known attachment method without needing to guess at the basic hardware package. Before installation, the buyer should confirm exact cabinet dimensions, the divider spacing needed for the stored items, and whether the cabinet floor or mounting points are suitable for the included clips. For a base cabinet tray divider layout, spacing often matters as much as height because narrow spacing can limit access while wide spacing can waste room. Since exact width and depth details are not listed in the verified data, those measurements should be checked in technical documentation before final layout.
Compare this metal tray divider with basics
When buyers compare one metal tray divider to another, the most useful differences are usually construction format, finish, mounting method, and pack quantity. This Rev-A-Shelf tray divider is identified as a single-piece divider rather than a multi-part assembly. That can help with consistent installation because the divider arrives in a defined form and uses a specified clip mounting method. The chrome finish also gives buyers a clear finish choice when matching other cabinet accessories or visible storage areas.
Another practical difference is pack format. This listing is a bulk pack of 10, sold in full boxes only. That is useful for cabinet shops, multi-cabinet projects, or buyers who want the same divider style across several installations. A buyer who only needs one divider should confirm whether a single-unit listing is more appropriate, since the series is described as available in both single units and bulk pack options.
From a trust and consistency standpoint, the verified product identity is clear: Rev-A-Shelf brand, 597 Series, metal tray divider, chrome finish, 12 inch height, and included clips and screws. Those facts make comparison easier than generic listings that leave out finish, mounting method, or included hardware. If a buyer needs exact dimensional fit beyond height, or wants load and compliance details, those points should be confirmed directly with the manufacturer before ordering. That approach helps avoid mismatch in cabinet layout and keeps installation planning grounded in verified information.
Ask fit questions before tray divider orders
Will this Rev-A-Shelf tray divider fit any cabinet?
Rev-A-Shelf tray divider fits only where cabinet interior dimensions and mounting surfaces suit the divider layout. Confirm cabinet height, depth, spacing, and clip attachment points before ordering.
Is this the RS597-12 size or the RS597-18 size?
This Rev-A-Shelf 597 Series tray divider is the 12 inch height version. Buyers needing a taller divider should verify the RS597-18 option separately.
What finish does this cabinet tray organizer have?
This cabinet tray organizer has a chrome finish. The verified series description also notes that white and chrome finishes are available in the line.
How is this metal tray divider installed?
This metal tray divider mounts with four screw-on clips per divider. Screws and clips are included for installation.
How many dividers come in this pack?
This RS597-12CR-10 listing is a bulk pack of 10 tray dividers. Bulk packs are sold in full boxes only.
Can I use this as a base cabinet tray divider?
This tray divider is classified under base cabinetry organizers and fillers. Buyers should still confirm cabinet dimensions and layout before installation.
Are mounting clips included with the rev a shelf tray organizer?
The rev a shelf tray organizer includes mounting clips and screws. Each divider uses four screw-on clips.
Does the listing include load or compliance information?
This Rev-A-Shelf tray divider listing does not provide load, safety, or compliance details. Confirm those points with the manufacturer documentation if required.
What should I measure before ordering this chrome tray divider?
This chrome tray divider purchase should be based on cabinet interior height, usable depth, planned slot spacing, and the size of trays or boards being stored.
Order the right chrome tray divider
Chrome tray divider selection is easier when the product identity and included hardware are clear. This Rev-A-Shelf 597 Series model is a 12 inch single-piece metal divider in a bulk pack of 10, with screws and four screw-on clips per divider included. Before purchase, confirm your cabinet interior measurements, the divider spacing you need, and whether the RS597-12 height is the right fit for your trays, platters, or boards. If you are comparing pack sizes or other series heights, verify those details before placing the order.
