
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPBTRK48MA to RSBTRK48MA.
Omega National Maple Wine Bottle Storage is an unfinished, solid wood bottle rack designed to convert shelf or upper cabinet space into efficient bottle storage, so standard cabinet interiors can be used to organize wine without changing the cabinet casework. The rail set is made from maple, giving installers and woodworkers a solid wood component that can be sanded, stained, or finished to match surrounding cabinetry. Each set is sold by the pair as front and back rails, which creates a matched support for bottle fronts and rears across the full cabinet depth. Rail sets measure 3/4 inch deep, 48 inches wide, and 2 inches high, so they span typical cabinet widths while staying low-profile under existing shelves. The design provides 11 openings for standard wine bottles, turning a single cabinet run into predictable, evenly spaced bottle storage.
The rail sets measure 3/4 inch deep, 48 inches wide, and 2 inches high, so they sit as a narrow strip inside a cabinet while still spanning a full 4-foot shelf or upper cabinet run. This depth keeps the rack from eating into usable vertical space above the bottles, which is useful when working under existing fixed shelves. Because the system converts shelf and upper cabinet space into bottle storage, it can be laid out along the cabinet interior where bottles need to sit, rather than dictating new cabinet dimensions. The 11 openings are arranged along the 48-inch length, which gives installers a consistent pattern for cutting or positioning matching openings in face frames or decorative valances if desired.
This bottle rack is designed to convert shelf and upper cabinet space into efficient bottle storage, so it fits naturally into kitchen, bar, or pantry cabinets built to accept a 48-inch interior run. The solid maple construction suits projects where the surrounding cabinetry is also maple or will be finished to match maple tones, supporting visual continuity inside open cabinets. Because the rail set is sold by the pair as a front and back rail, it can be positioned parallel inside a cabinet to create a full bottle support system that uses the entire interior width. The 2-inch height keeps the rails visually light, which is helpful when the rack is installed behind glass doors or in open shelving where the interior hardware remains visible.
The front rail is shaped to hold the front of each bottle, while the rear rail is shaped to hold the rear of the bottle, so each bottle rests in a consistent horizontal position across all 11 openings. This matched shaping supports the bottle at two points, which stabilizes standard wine bottles and keeps rows aligned in everyday use. Both rails have radiused edges, so there are no sharp edges against bottle glass, which supports smoother loading and removal during regular handling. The 11 openings along the 48-inch length provide a fixed capacity, helping installers plan cabinet bay widths and spacing relative to adjacent storage. Solid wood construction in maple means the rails respond to the same finishing processes as typical cabinet components, creating a unified interior once stain or clear coat is applied. The 3/4-inch depth keeps the rack footprint modest while still carrying the bottle load across the full width of the cabinet.
The S9200MUF1 maple bottle rack converts shelf and upper cabinet space into efficient bottle storage, turning standard cabinet interiors into organized wine storage positions.
The bottle rack rail set holds 11 standard wine bottles, so capacity per cabinet bay can be planned accurately during layout.
The rail sets measure 3/4 inch deep, 48 inches wide, and 2 inches high, fitting a 4-foot cabinet run with a low-profile presence.
The front rail is shaped to hold the front of each bottle and the rear rail is shaped to hold the rear, creating two-point support along the bottle length.
The bottle rack rails are unfinished solid wood, allowing finishing professionals to stain or clear coat them to match surrounding cabinetry.
The S9200MUF1 bottle rack is made from solid maple, giving cabinetmakers a hardwood component compatible with standard woodworking and finishing processes.
The unfinished, solid maple construction, 3/4 inch by 48 inch by 2 inch rail dimensions, and 11 standard bottle openings give this rack a defined role in cabinet and shelf projects. The matched front and rear rails with radiused edges translate into stable, repeatable bottle positioning inside kitchen, bar, or pantry cabinets. For projects calling for a 4-foot maple wine storage run inside existing or new cabinetry, this S9200MUF1 rail set provides a clear, dimensioned solution that aligns with typical cabinet construction methods.
Sold In: 1 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Set | RSBTRK48CH Mfr# S9200CUF1 | Omega National Cherry Wine Bottle Storage 3/4"D x 48"W x 2"H, 11 Openings Unfinished - S9200CUF1 | ||||
Sold in: 1 Set | RSBTRK48RO Mfr# S9200OUF1 | Omega National Red Oak Wine Bottle Storage 3/4"D x 48"W x 2"H, 11 Openings Unfinished - S9200OUF1 |