PVC Edgebanding 1-5/16 x 600 Roll For Clean Edges
PVC edgebanding 1-5/16 x 600 roll describes a continuous 600 foot length of edge banding that covers long cabinet or panel runs without frequent splices, which helps keep edges looking consistent along the full piece. The 1-5/16 inch width is sized to cover common panel thicknesses while leaving working room for trimming, giving installers space to flush the edge accurately. The 0.020 inch thickness creates a slim edge profile that dresses raw substrate without adding bulk, which suits modern flat-panel work where a lean edge is preferred. The material is PVC, so it provides a uniform surface that visually finishes exposed panel edges. The product is supplied on a roll, so it can be fed smoothly through edgebanders or used in controlled lengths for manual application on smaller jobs.
Key PVC Edgebanding Details For Daily Use
- The 600 foot roll length supports multiple cabinets or larger jobs from a single coil, reducing changeovers during continuous production runs.
- The 1-5/16 inch width provides coverage across the panel edge with margin for trimming, supporting a straight, clean finished line after routing or scraping.
- The 0.020 inch thickness creates a light, low-profile edge that transitions smoothly from face to edge, which is useful on contemporary cabinet fronts.
- The PVC material gives a uniform, shaped edge that visually covers the core material, helping panels present as finished components in the final assembly.
- The roll format keeps the edgebanding coiled for handling and storage, so lengths can be drawn as needed on the bench or through an edgebander.
Edgebanding Size And Format For Installation
The 1-5/16 inch width on this PVC edge banding gives fabricators a workable strip that spans the edge and slight overhang, so trimming tools can track reliably along the edge line. The 0.020 inch thickness creates a lean profile that responds predictably when trimming, which helps maintain a flat plane from panel face to edge. The continuous 600 foot roll supports longer machine runs because operators can stage one coil and run repeated parts. The PVC construction presents a consistent edge surface that can be dressed with standard trimming and scraping tools, supporting repeatable results from part to part.
Using Pepperdust PVC Edgebanding In Projects
Pepperdust Color 2495 On Visible Panel Edges
This PVC edgebanding in color 2495 Pepperdust provides a defined color identity that can be matched to Pepperdust-toned panels or coordinated surfaces, which helps visible cabinet and furniture edges read as part of a unified surface. The color 2495 designation gives shops a repeatable reference when reordering, supporting consistent appearance across different runs or replacement parts. Because the banding is 1-5/16 inches wide, it can cover standard edge thicknesses used in many panel-based constructions, so visible edges present as a deliberate, finished detail. On a 600 foot roll, the same Pepperdust tone can be carried through larger batches of doors, drawer fronts, or casework panels without shifting between short lengths. This continuity matters where multiple cabinets align in a run and edges sit at eye level, because color and edge profile stay consistent from piece to piece.
Doellken Woodtape Details For Repeatable Results
The brand designation Doellken Woodtape identifies the manufacturer of this PVC edgebanding, giving shops a specific source and part number 2495-2120-1 to reference for job records. Using a defined manufacturer and part number supports repeat ordering when a project specification calls for the same Pepperdust edge treatment on future phases. The 0.020 inch thickness trims cleanly relative to thicker edges, which can help reduce the effort required at the router or scraper while still providing a finished edge. The extended 600 foot roll length allows operators to queue up long runs on an edgebander, which supports consistent feed conditions and helps maintain similar edge quality across many parts. With the width, thickness, color ID, and part number defined, estimators and shop managers can tie this edgebanding to specific job standards and reproduce the same edge detail whenever the Pepperdust finish is specified again.
Common Questions About Pepperdust PVC Edgebanding
What are the dimensions of this Pepperdust edgebanding roll?
The PVC edgebanding is 1-5/16 inches wide, 0.020 inches thick, and supplied in a 600 foot roll, so it spans typical panel edges with enough length for multi-part runs.
What does color 2495 Pepperdust refer to on this tape?
Color 2495 Pepperdust identifies the specific Pepperdust tone of this PVC edgebanding, so shops can match the edge color to Pepperdust-oriented panels or repeat the same look later.
What material is the Doellken 2495-2120-1 edgebanding made from?
The Doellken Woodtape 2495-2120-1 product is PVC edgebanding, providing a consistent plastic edge surface that finishes raw panel edges in cabinet and furniture work.
How does the 0.020 inch thickness affect trimming and edge profile?
The 0.020 inch thickness keeps the PVC edge slim, which supports a smooth transition from face to edge and trims efficiently with standard routing or scraping tools.
Why would a 600 foot roll be useful in a shop?
A 600 foot roll allows extended edgebander runs or multiple cabinets to be produced from one coil, supporting consistent edge appearance across an entire project.
Who is the manufacturer of this Pepperdust PVC edgebanding?
This PVC edgebanding is manufactured by Doellken Woodtape, giving buyers a defined brand and part number to align with job specifications and reorders.
Select Pepperdust Edgebanding For Defined Edge Work
This PVC edgebanding, color 2495 Pepperdust, 0.020 inch thick and 1-5/16 inches wide, provides a clear specification for finishing panel edges on cabinet and woodworking projects. The 600 foot roll length supports both production runs and smaller batches using the same material. With the Doellken Woodtape brand and part number 2495-2120-1 documented, this edge banding can be tied directly to project standards. Order this Pepperdust PVC edgebanding from Wurth Baer Supply to align panel edges with a defined color and size.
