PVC Edgebanding, Color 3921 Wild Cherry, 0.020" Thick 1-5/16" x 600' Roll

PVC Edgebanding Wild Cherry For Clean Edges

PVC edgebanding wild cherry from Doellken Woodtape covers exposed panel edges with a finish that aligns with Wilsonart 7054 Wild Cherry 60 Matte - Close, so cabinet and fixture edges visually follow the laminate surface. The 0.020 inch thickness gives a slim, workable edge layer that shapes easily on standard edgebanders and trimmers, helping keep setup predictable on repeat runs. A 1-5/16 inch width spans typical panel thicknesses used with matching Wilsonart surfaces, so a single pass can cover the edge with trimming margin. The 600 foot roll length supports longer production runs or multiple smaller projects without constant roll changeover, which keeps machines running and reduces downtime. The Doellken Woodtape brand identifies the material as part of a recognized edge banding line, supporting consistent behavior across jobs using the same product family.

Key Wild Cherry PVC Edgebanding Details

• The 1-5/16 inch width provides coverage across common panel thicknesses with extra material for flush trimming, which helps installers dial in a clean line against Wilsonart 7054 Wild Cherry 60 Matte surfaces.
• The 0.020 inch thickness keeps the edge profile light while still forming a defined band, which supports easy trimming and reduces the edge step between laminate face and banded edge.
• The 600 foot roll format offers extended run capacity, so shops can process a series of cabinets or casework pieces in the Wilsonart 7054 Wild Cherry range with fewer roll changes.
• The color identification as 3921 Wild Cherry targets visual alignment to Wilsonart 7054 Wild Cherry, which helps maintain a coordinated appearance across laminated panels and their finished edges.
• The Doellken Woodtape brand and manufacturer part number 3921-2120-1 tie this roll to a specific, repeatable product, which simplifies reordering for matching touchups, additional runs, or field service work.

Edgebanding Size And Finish For Installation

The 1-5/16 inch width on this PVC edgebanding gives installers trimming room on both sides of typical casework panels, which supports clean, flush routing without exposing substrate. The 0.020 inch thickness works well with standard edgebanding equipment, so feed, heat, and pressure settings can remain in a familiar range when switching between similar PVC tapes. The color match reference to Wilsonart 7054 Wild Cherry 60 Matte - Close points toward a matte visual effect, which helps the banded edge sit closely with a matte Wilsonart surface in finished installations. The 600 foot roll length suits both shop production and on-site edging, allowing multiple cabinet banks or fixtures to be processed from a single roll of material.

Using Wild Cherry PVC Edgebanding On Projects

Where This Wild Cherry Edge Banding Fits Best

This PVC edgebanding, identified as color 3921 Wild Cherry, aligns with Wilsonart 7054 Wild Cherry 60 Matte - Close, so it suits projects that already specify that laminate on faces and doors. The 1-5/16 inch width fits edge coverage for many cabinet sides, shelves, and doors built around that laminate, giving enough overhang to trim back to a tight, straight edge. The 600 foot roll supports runs of coordinated components, such as kitchens, break rooms, or commercial fixtures, where a consistent wild cherry look is needed across multiple panels. Because it is part of the Doellken Woodtape line, shops using other Doellken products can keep color and behavior consistent across related work.

Details That Support Consistent Edging Results

The 0.020 inch thickness gives this wild cherry PVC edgebanding a balance between flexibility and a defined edge, which helps machines track the band smoothly while still forming a crisp corner after trimming. The 1-5/16 inch width offers predictable trimming margins, allowing operators to set up edgebanders and trimmers for repeat passes without changing guides between similar panels. The color callout to Wilsonart 7054 Wild Cherry 60 Matte - Close helps designers and fabricators plan edges around a known surface reference, supporting consistent appearance from shop drawings to installation. The clearly defined manufacturer part number 3921-2120-1 ties each roll back to the same specification, so replacement rolls behave like earlier ones on the same machines and projects.

Practical Questions About This Edgebanding Roll

Select This Roll For Wild Cherry Projects

This PVC edgebanding in color 3921 Wild Cherry, matched to Wilsonart 7054 Wild Cherry 60 Matte - Close, offers a defined way to finish exposed panel edges in that color range. The 1-5/16 inch width, 0.020 inch thickness, and 600 foot roll length help shops and serious DIY users run consistent edges across cabinets, shelves, and fixtures. Using the Doellken Woodtape reference 3921-2120-1 keeps future orders aligned with the same specification for ongoing work and touchups.