Doellken PVC Edgebanding 15/16" x 3 mm, 4147 Oiled Cherry, 328', 4147 1503 1

PVC Edgebanding For Oiled Cherry Panels

PVC edgebanding in Color 4147 Oiled Cherry gives cabinet and furniture projects a finished edge that visually ties into matching board and laminate colors. The 3mm thick profile creates a substantial edge, which helps panels present a solid, built-up look in exposed areas. The 15/16 inch width works with common panel thicknesses where you want slight overhang for flush trimming and clean alignment along the edge. Supplied as a 328 foot roll, this length supports larger runs of casework or multiple smaller jobs without frequent changeover during production. The product is part of the Doellken Woodtape line, so it fits into shops already standardizing on that brand. As an edge banding material within the edgebanding and surfacing category, it is aimed at covering raw substrate edges so finished faces and edges read as a single coordinated surface.

Key Oiled Cherry Edge Details For Projects

• The 3mm thickness creates a deep edge profile that can visually match thicker fronts, which is useful where cabinets or furniture show exposed sides and tops.
• The 15/16 inch width provides coverage for typical panel thicknesses with trim allowance, helping installers achieve a tight, flush edge after trimming operations.
• The 328 foot roll format supports continuous edgebanding runs, which can reduce splice points along long cabinet gables or shelves.
• Color 4147 Oiled Cherry is identified as a good color match to Arclin H1304 Oiled Cherry, helping fabricators coordinate edging with that Arclin surface.
• The same 4147 Oiled Cherry color is described as close to KML KMAH1304 Oiled Cherry Classic and Pionite WC421 Oiled Cherry N_Suede, allowing visual alignment when those specific surfaces are part of a project.

Edgebanding Size And Color Match For Installation

The 3mm thick, 15/16 inch wide format of this PVC edge banding gives installers a defined profile to work with during application and trimming. That thickness can be useful where a more substantial edge is preferred around doors, drawer fronts, or case edges. The width supports typical panel constructions, giving room for trimming back to a clean, straight line. With the product identified as Color 4147 Oiled Cherry, shops can target use on jobs calling for that finish tone. Because the roll length is 328 feet, edgebanding stations can handle sequences of parts from a kitchen or commercial build without stopping mid-run to change material.

Where This Oiled Cherry Edgebanding Fits Best

Using 4147 Oiled Cherry On Matching Surfaces

The color 4147 Oiled Cherry is described as a good color match to Arclin H1304 Oiled Cherry, so it suits projects where that Arclin surface is used on doors, panels, or tops and the exposed edges need a coordinated appearance. It is also noted as close to KML KMAH1304 Oiled Cherry Classic, giving fabricators an option when that board is in the layout and exact duplication is less critical than overall tone and character. In addition, the same color is indicated as close to Pionite WC421 Oiled Cherry N_Suede, supporting panel work where that Pionite laminate is specified and a visually similar PVC edge is required for the perimeter.

Because this product is classified as edge banding in the edgebanding and surfacing group, it is aligned with cabinet, furniture, and casework production where raw substrate edges would otherwise show. The Doellken Woodtape branding places it within a line recognized in the woodworking industry, which can matter to shops that standardize on particular color systems for repeat customers. The Oiled Cherry tone lets designers extend that finish across faces and edges so components share a consistent look.

Dimensions And Roll Format Supporting Workflow

The 3mm thickness of this PVC edgebanding builds a sturdy edge profile, which can help edges stand out on components like cabinet doors and drawer fronts that benefit from a more pronounced appearance. At 15/16 inch wide, the material covers standard panel edges with some margin, which supports clean trimming passes to bring the edge flush with the face surfaces. The 328 foot roll length supports batch production because a single roll can serve a series of cabinets or fixtures before changeover. Identifying the product by manufacturer part number 4147-1503-1 helps shops track the exact color and size across reorders, which supports consistent results over multiple projects. As an edge banding product within the Wurth Baer Supply assortment, it fits into a workflow where edgebanding, laminates, and related surfacing products are sourced together for coordinated jobs.

Common Questions About 4147 Oiled Cherry Edgebanding

Selecting This Oiled Cherry Edge For Your Job

This PVC edgebanding, in Color 4147 Oiled Cherry from Doellken Woodtape, provides a 3mm thick, 15/16 inch wide edge solution on a 328 foot roll for cabinet and furniture panels. Its color match and close relationships to Arclin H1304 Oiled Cherry, KML KMAH1304 Oiled Cherry Classic, and Pionite WC421 Oiled Cherry N_Suede support coordinated projects using those surfaces. When an Oiled Cherry finish is specified, this edge banding gives fabricators a defined option that aligns panel edges with the selected surfacing materials through Wurth Baer Supply.