Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Valencia Series brushed nickel pull gives cabinets a defined 3-3/4 inch center to center grip, so hole locations are predictable across doors and drawers. The zinc die cast construction provides a solid feel in hand, which supports confident opening and closing on frequently used fronts. A brushed nickel finish keeps reflections subdued and consistent, helping faces read clean across a run. Overall length of 4-15/16 inches means the pull spans slightly beyond the bore centers, offering visual balance on typical cabinet rail widths. A projection of 1 inch sets the hand clearance off the face at a controlled distance, which helps fingers engage the pull without crowding the panel. Width of 13/16 inch gives a stable gripping surface, so users can pull straight without twisting.
The 96mm center to center dimension defines the drilling distance required, which allows installers to use jigs or CNC programs set to that spacing. A base diameter of 11/16 inch at each footing sets the bearing surface on the door or drawer, helping distribute contact around the mounting holes. With 4-15/16 inch total length, the pull positions its bases near the ends while keeping them within standard stile widths, which helps avoid overhanging edges. The specified M4 x 45mm screw size connects through the mounting holes, tying the pull firmly to the panel when matched to the panel thickness. The 1 inch projection limits how far the pull extends into the room, which helps maintain clearance in tighter walkways while still leaving room for a full finger grip.
The Valencia Series brushed nickel pull with 3-3/4 inch center to center spacing fits cabinet and drawer fronts drilled at 96mm, which is a common standard in many shop layouts. The 4-15/16 inch overall length suits doors and drawers where a mid-size pull balances between small knobs and longer appliance-style bars, helping the hardware match typical residential or light commercial cabinet proportions. With a base diameter of 11/16 inch, each mounting point covers the bore cleanly, which keeps the hardware footprint tidy on narrow rails. The 13/16 inch width gives enough surface area so the pull stands out visually on painted or stained wood, while still staying compact for smaller fronts. The brushed nickel finish coordinates with other brushed nickel cabinet hardware and fittings, helping build a continuous look along a run of cabinetry.
The defined 96mm (3-3/4 inch) center to center distance lets installers set up drilling templates once and repeat them, which reduces layout time across large projects. Zinc die cast construction holds the geometry of the feet and gripping bar, so pulls sit square when installed against flat door or drawer faces. The 1 inch projection sets a consistent stand-off from the panel, which helps adjacent doors and drawers operate without hardware conflict. A width of 13/16 inch gives installers a clear reference when aligning the pull level to door edges, aiding quick visual checks during mounting. The specified M4 x 45mm screw size provides a standard metric thread engagement point, so installers can match this spec when selecting fasteners for various panel thicknesses. The brushed nickel finish maintains a uniform surface tone across multiple pulls in a bank of cabinets, which supports a professional, consistent presentation of the finished work.
The Berenson Valencia Series pull has a 3-3/4 inch (95 mm) center to center dimension, which matches 96mm drilling patterns commonly used for cabinet and drawer fronts.
The Valencia Series brushed nickel pull has an overall length of 4-15/16 inches, giving a mid-size span that works well on many standard cabinet doors and drawers.
The 7001-1BPN-P Valencia pull is zinc die cast, which provides a solid metal feel and consistent shaping across all pieces in a project.
This cabinet pull has a 1 inch projection, creating defined finger clearance while keeping the hardware close to the cabinet face to manage space.
This Valencia zinc die cast pull uses M4 x 45mm screws, so the mounting interface is based on a standard M4 metric thread and 45mm length.
The pull has a base diameter of 11/16 inch and a width of 13/16 inch, providing stable footing on the panel and a comfortable gripping bar.
The Berenson Valencia Series brushed nickel pull pairs a 3-3/4 inch center to center layout with zinc die cast construction, which suits cabinet runs built around 96mm drilling. With defined overall length, projection, and base dimensions, the pull offers predictable fit on doors and drawers. At Wurth Baer Supply, this 7001-1BPN-P model is presented with its key measurements and finish details, so it can be chosen to match existing drilling patterns and brushed nickel design schemes in new or retrofit cabinet work.
Sold In: 1 Each
