Berenson Valencia Series 3-3/4" (96 mm) Center to Center Polished Chrome Pull, - 7017-126-C

Valencia Pull 96mm Polished Chrome For Cabinets

Valencia pull 96mm polished chrome describes a Berenson Valencia Series cabinet pull sized for a 3-3/4 inch (96 mm) center-to-center drilling, so it fits standard cabinet hole spacing in many kitchen, bath, and shop layouts. The pull is made from zinc die cast, which provides a solid metal feel while keeping weight manageable for typical cabinet doors and drawers. Its polished chrome finish creates a bright, reflective surface that reads clean and modern in residential or commercial millwork. The overall length of 4-7/16 inches gives usable grip area while staying compact on narrower drawer fronts. A base diameter of 7/16 inch keeps the footprint tight around the mounting points, which helps when working close to panel edges or narrow rails. A projection of 1-3/16 inches gives fingers clearance behind the pull, making daily operation smoother.

Key Valencia Series Pull Details For Projects

• The center-to-center dimension of 3-3/4 inches (96 mm) matches a common drilling pattern, so it works well for new layouts using this spread or for swapping pulls on cabinets already drilled at this spacing.
• A polished chrome finish produces a smooth, reflective surface that pairs with other chrome fittings, which helps keep hardware visually consistent across doors, drawers, and exposed hinges in the same room.
• Zinc die cast construction forms the pull from cast metal, giving it a firm hand feel while staying suitable for repetitive opening and closing on cabinet doors and drawers in everyday use.
• The overall length of 4-7/16 inches covers a modest section of the drawer or door face, which provides finger room without crowding smaller fronts or clashing with nearby hardware layouts.
• A projection of 1-3/16 inches stands the pull off the cabinet face enough for fingers to wrap behind, helping reduce knuckle contact with the door surface during operation, especially on heavier fronts.
• The base diameter of 7/16 inch at each mounting point keeps the footprint small, which is useful on narrow rails or stile edges where larger bases could overrun decorative profiles or tight reveals.

Mounting Dimensions And Pull Fit On Cabinets

This Berenson Valencia Series pull is specified with a 3-3/4 inch (96 mm) center-to-center distance between mounting holes, which sets the drill pattern the installer follows on doors and drawers. The pull length of 4-7/16 inches provides a clear reference for positioning relative to door edges and stile widths, helping align multiple pulls in a straight visual line. A projection of 1-3/16 inches defines how far the pull sits off the cabinet face, affecting how comfortably hands grasp it on thicker or taller fronts. The 1/2 inch width of the pull presents a slim profile across the front, which can help when stacking drawers vertically because handles stay visually lighter while remaining functional.

Using This Berenson Valencia Pull In Work

Where The 7017-126-C Pull Is Commonly Applied

The Berenson Corporation 7017-126-C pull falls under handles and pulls in decorative hardware and moldings, positioning it for cabinet and furniture applications where a metal pull is needed. Its 3-3/4 inch (96 mm) center-to-center spacing aligns with a widely used cabinet hardware standard, so it suits many face-frame and frameless cabinet layouts based on that drilling pattern. The polished chrome finish matches chrome fixtures and trim, which is helpful when tying cabinet hardware to faucets, shower fittings, or appliance details in the same space. With a 4-7/16 inch total length and 1/2 inch width, the pull works on both doors and drawers without overpowering smaller fronts, making it practical for uniform hardware across a full run of cabinetry.

Details That Support Consistent Cabinet Results

The precise 96 mm center-to-center dimension provides a reliable layout number when marking jigs or templates, which supports repeatable drilling across multiple fronts on larger jobs. Zinc die cast material forms the body as a single cast piece, which helps each pull match the next in shape and feel, reducing visual variation on long banks of doors or drawers. The 1-3/16 inch projection controls how far the pull stands off the surface, so a run of hardware maintains a consistent shadow line and hand clearance along the entire installation. A 7/16 inch base diameter keeps contact tight to the mounting area, which is useful for maintaining clean transitions where the pull meets painted, stained, or laminated surfaces. The M4 x 45mm screw size specification defines the thread and length pairing this pull is designed around, which matters when matching fasteners to typical cabinet door and drawer front thicknesses in woodworking shops.

Common Questions About Berenson Valencia Cabinet Pull

Selecting This Valencia Pull For Your Next Run

The Berenson Valencia Series 7017-126-C combines a 3-3/4 inch (96 mm) center-to-center layout, zinc die cast construction, and polished chrome finish to address common cabinet hardware needs. Its 4-7/16 inch length, 1/2 inch width, and 1-3/16 inch projection balance grip comfort with a compact footprint across doors and drawers. With defined dimensions, material, and finish, this Valencia pull suits installers and shops laying out consistent hardware runs on kitchens, baths, or built-ins using this standard spacing.