4 inch traditional handle pull describes this Schaub and Company Traditional Series cabinet pull that uses a 4 inch center to center dimension to give installers a predictable layout point across doors and drawers. The solid brass material stated in the description provides a dense feel and stable mounting base, which supports repeatable alignment on cabinet fronts. The distressed nickel finish stated for this pull delivers a muted metallic look that suits traditional designs where a softer tone is preferred. The 4-3/8 inch overall length noted in the specs gives a small amount of extension beyond the hole spread, which helps cover existing bore marks on many cabinet faces. The 1-1/8 inch projection listed for this handle sets the working clearance off the door or drawer, which influences fingertip access and how the pull stands proud of face frames and fronts.
The 4 inch center to center measurement listed for this Schaub and Company pull sets the exact distance between mounting points, which guides boring jigs and template setups on cabinet doors and drawer fronts. The 1-1/8 inch projection from the spec defines how far the handle stands off the surface, which affects knuckle clearance when gripping in tighter cabinet runs. The solid brass construction called out in the description offers a consistent substrate for threads at the mounting locations, which supports repeatable tightening of the pull to the cabinet face. The 4-3/8 inch overall length given for this handle defines its total footprint, which matters when positioning the pull relative to stiles, rails, and adjacent hardware on a run of doors.
The Product Name identifies this piece as a 4 inch Traditional Designs handle pull in distressed nickel, which positions it for use on cabinet doors and drawers that follow a traditional aesthetic. The Category reference to Decorative Hardware & Moldings and Handles and Pulls places this item in a role as a working grip point rather than decorative trim only, which suits everyday opening and closing of casework. The Web Description tie to the Traditional Series further anchors this pull within a coordinated family, which helps when outfitting an entire room with matching hardware. The solid brass material stated in the listing supports application on residential or light commercial cabinetry where repeated hand contact is expected, because the base metal remains consistent behind the finish across all contact surfaces.
The 4 inch center to center dimension recorded for this pull sets a standard drill pattern that aligns with many cabinet layouts, which reduces layout time when repeating the same spacing across a bank of doors or drawers. The 4-3/8 inch length or diameter value provides the full tip-to-tip size, which helps installers visualize the pull footprint against narrow rails or wider drawer fronts before boring. The 1-1/8 inch projection from the spec defines the standoff from the cabinet face, which affects how fingers wrap behind the pull and how far the handle extends into traffic paths in tighter kitchens or shops. The distressed nickel finish named in the description supplies a consistent surface color across multiple pulls, which simplifies planning when lining up several handles on tall pantry doors or wide drawer stacks. The Manufacturer Part # 732-DN provides an exact identifier for this configuration, which aids in matching existing hardware runs or ordering the same pull again for future cabinet additions or replacements.
The Schaub and Company 732-DN pull has a 4 inch center to center dimension, which guides hole spacing on cabinet doors and drawers using this handle.
This Traditional Series handle has a 4-3/8 inch overall length, which defines the full footprint of the pull across the cabinet face.
The Schaub and Company 4 inch center to center pull has a 1-1/8 inch projection, which sets the clearance between the grip and the door or drawer front.
The Web Description states this 732-DN handle as solid brass, which provides a dense base metal under the distressed nickel finish for a substantial feel.
The Product Name and Web Description specify a distressed nickel finish, which delivers a muted metallic appearance suitable for traditional cabinet designs.
The Web Description lists this handle under the Traditional Series collection, which groups it with other similarly styled Schaub and Company decorative hardware.
This solid brass Schaub and Company Traditional Series pull pairs a 4 inch center to center layout with a 4-3/8 inch overall length in distressed nickel, which suits projects calling for coordinated traditional cabinet hardware throughout doors and drawers.