4 inch cast bronze mountain handle pull describes a solid bronze cabinet handle from the Cast Bronze Mountain collection that is sized for a 4 inch center to center drilling pattern, so it suits common cabinet hole spacing on doors and drawers. The solid bronze material gives this pull a substantial feel in hand, which helps doors and drawers feel positive when opening and closing. The Verde Imperiale finish provides a distinctive colored surface on the bronze, so the pull becomes a visual design element on the cabinet face. An overall length of 5 inches gives enough bar length beyond the 4 inch mounting centers, which provides comfortable finger clearance at each end during daily use. A projection of 1-1/4 inch sets the grip away from the cabinet surface, so fingers can wrap behind the pull without rubbing against the door or drawer front.
The 4 inch center to center dimension sets the distance between the mounting holes, which matches a widely used drilling layout on cabinet doors and drawers and supports straightforward alignment during installation. The 5 inch overall length defines how much of the cabinet face the pull spans, which helps it sit comfortably on standard drawer fronts without crowding neighboring hardware. A projection of 1-1/4 inch determines how far the handle stands off from the surface, which creates space for fingers while still keeping the pull close enough for a compact appearance. The 7/8 inch width establishes the front-to-back band the user sees on the cabinet, which keeps the handle visually substantial without overpowering smaller doors. The specified 8-32 x 1 inch screw size sets the thread and length for through-boring, which works with typical cabinet material thicknesses found in many woodworking projects.
The Schaub and Company 4 inch cast bronze mountain handle pull in the Verde Imperiale finish is part of the Cast Bronze Mountain collection, which positions it for use wherever that collection theme is carried across cabinetry. The 4 inch center to center layout matches a common standard on many cabinet doors and drawers, which makes this pull suitable where that drilling pattern already exists or is planned during construction. Its overall 5 inch length means it can sit cleanly on cabinet rails, panels, and smaller drawer faces, which keeps the hardware proportional to typical residential or shop cabinetry. The 7/8 inch width presents a solid bronze band across the cabinet front, which visually anchors the hardware while still leaving room for surrounding trim or adjacent pulls. The Verde Imperiale finish lends a distinctive color to the bronze base, which supports designs that call for a specific finish continuity on visible handles.
The defined 4 inch center to center dimension allows repeated drilling with the same layout, which helps installers maintain a straight visual line of pulls across multiple cabinet doors and drawers. The 1-1/4 inch projection is fixed, so every installed pull stands off the cabinet face by the same amount, which keeps finger clearance consistent across a run of cabinetry. Because the handle is solid bronze, its cast body holds the specified width of 7/8 inch along the grip, which gives users a predictable surface to grasp on every door or drawer. The 5 inch overall length repeats from piece to piece, which keeps pulls uniformly spaced relative to panel edges when using a standard drilling template. The 8-32 x 1 inch screw size specification matches a common machine screw standard in cabinet hardware, which supports a straightforward fastening approach wherever that thread and length are appropriate for the cabinet construction.
The pull has a 4 inch center to center mounting, 5 inch overall length, 1-1/4 inch projection, and 7/8 inch width, which together set its footprint and grip space on cabinet fronts.
The 777-VI handle is made from solid bronze, which provides a substantial feel and a cast metal body suited to frequent cabinet door and drawer operation.
The cabinet pull uses the Verde Imperiale finish, which defines the color and character of the bronze surface for projects requiring that specific finish tone.
The 4 inch center to center layout provides a standard hole spacing, which supports consistent drilling and alignment across doors and drawers using common cabinet templates.
The 1-1/4 inch projection sets how far the pull stands off the cabinet surface, which creates finger clearance behind the handle for a comfortable grip.
This Schaub cast bronze pull is specified for 8-32 x 1 inch screws, which aligns with a common machine screw standard used in cabinet hardware installations.
The Schaub and Company 4 inch cast bronze mountain handle pull in the Verde Imperiale finish combines a solid bronze body, a 4 inch center to center layout, and a 5 inch overall length, so it fits standard cabinet drilling while delivering a defined visual and tactile presence. The 1-1/4 inch projection, 7/8 inch width, and specified 8-32 x 1 inch screw size work together to establish a clear installation and grip profile, which supports consistent results across multiple cabinet doors and drawers when choosing hardware for a coordinated project.