Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
4 inch traditional handle pull identifies this Schaub and Company solid brass handle as a good match when a 4 inch center to center layout is already drilled in cabinet or furniture fronts, so hole spacing aligns cleanly with existing work.
The Traditional Series collection designation ties this handle to a classic style family, which helps keep visual lines consistent across doors and drawers when multiple pulls from the same series are used on a project.
The oil rubbed bronze finish description defines the dark, warm tone applied to the solid brass body, which supports projects calling for bronze-colored hardware that coordinates with similar finishes on hinges, faucets, or lighting.
The solid brass material construction detail means the pull is built from brass rather than a plated light alloy, giving the handle a reassuring feel in hand during frequent use on doors and drawers in busy spaces.
The 4-3/8 inch overall length dimension explains how far the pull runs across the face of a cabinet front, which helps lay out spacing near panel edges or between neighboring hardware pieces on narrow rails and stiles.
The 1-1/8 inch projection dimension shows how far the pull stands off the mounting surface, leaving working space for fingers between the hardware and the door or drawer front during regular opening and closing.
The 8-32 x 1 inch screw specification identifies the threading and length used with this pull, which matters when matching to standard cabinet door thicknesses commonly encountered in shop-built or manufactured casework.
The Schaub and Company brand name ties the pull to a recognized decorative hardware manufacturer, which many installers and shops rely on when coordinating finishes and profiles across multiple jobs.
The 4 inch center to center dimension defines the distance between the two mounting holes, which allows the handle to drop onto pre-bored 4 inch patterns on doors and drawers without altering existing drilling.
The 4-3/8 inch listed length describes the tip-to-tip span of the pull, which helps align the handle on panels so margins from panel edges or neighboring hardware stay visually consistent.
The 1-1/8 inch projection value indicates stand-off from the face of the cabinet, giving installers a clear expectation of how far the pull will extend into the room and how it interacts with adjacent doors.
The 8-32 x 1 inch screw sizing connects the pull to standard machine screw stock used in cabinet shops, which supports straightforward fastening into typical door and drawer front thickness ranges.
The 4 inch traditional handle pull format makes this piece a natural choice where cabinets or furniture have been drilled on a 4 inch pattern, so swapping from another pull style keeps the same hole spacing intact.
The Traditional Series designation places this pull within a coordinated Schaub and Company family, so designers can match this handle with other Traditional Series items on upper doors, base cabinets, or furniture pieces.
The oil rubbed bronze finish wraps the solid brass base in a dark, rich tone that works well on painted or stained wood fronts, allowing the pull to stand out visually while still supporting warm design schemes.
The 4-3/8 inch full length gives the handle enough span across the door or drawer front to feel substantial, which matters on full-height doors where very small pulls can look undersized against tall panels.
The 1-1/8 inch projection figure establishes the working space behind the gripping area, so users can approach the pull from above, below, or straight on without fingers crowding against the door surface.
The solid brass construction detail means the pull body is made from brass, which provides mass and a firm feel when doors or drawers are pulled open repeatedly in kitchens, baths, or built-ins.
The clearly stated 4 inch center to center dimension simplifies layout when using boring jigs, because drill bushings can be set once for 4 inch spacing and run across an entire kitchen without changing settings.
The 4-3/8 inch overall length works with the 4 inch mounting pattern to leave small overhangs at each end, giving a visually balanced appearance while keeping mounting holes comfortably away from the handle tips.
The 1-1/8 inch projection pairs with the traditional arch profile to create a comfortable hand pocket, so installers can expect similar clearance across all doors when this pull is used in a full room.
The 8-32 x 1 inch screw size allows the pull to engage commonly used mounting holes for cabinet hardware, which keeps hardware planning straightforward when mixing this pull with other 8-32 threaded pieces.
The oil rubbed bronze finish on solid brass keeps color and sheen consistent on every handle described by the 732-10B part number, which supports uniform appearance across long runs of cabinetry.
The Schaub and Company branding on this Traditional Series pull ties it to a decorative hardware line, which helps shops repeat the same look on future projects by referencing the same manufacturer and series.
The 4 inch center to center layout, 4-3/8 inch overall length, and 1-1/8 inch projection define how this pull fits typical cabinet doors and drawers in terms of spacing and clearance.
The handle uses solid brass material, giving a dense feel in daily use and supporting a sturdy grip on doors and drawers.
The pull has an oil rubbed bronze finish, which delivers a dark, warm appearance that coordinates with other bronze-colored cabinet hardware.
The handle uses a 4 inch center to center mounting pattern, matching a common drilling standard used on many cabinet doors and drawers.
The pull projects 1-1/8 inch from the mounting surface, providing finger clearance between the handle and the cabinet front.
The handle is specified with 8-32 x 1 inch screws, aligning with a standard cabinet hardware machine screw thread size.
This 4 inch traditional handle pull from Schaub and Company combines a 4 inch center to center pattern, 4-3/8 inch length, and 1-1/8 inch projection, so it fits common cabinet layouts while providing comfortable clearance.
The solid brass construction and oil rubbed bronze finish position this Traditional Series pull as a practical choice when matching existing bronze-toned hardware or planning a coordinated hardware package.
Using the defined 8-32 x 1 inch screw specification and Schaub and Company part number 732-10B helps maintain consistency across jobs where repeatable cabinet hardware details matter.