Rev-A-Shelf ML-HD Chrome 12" Appliance Lift, RAS-ML-HDCR

Choose a Rev-A-Shelf mixer lift

Rev-A-Shelf mixer lift is a cabinet-mounted appliance lift designed to bring a heavy countertop appliance up from storage and back down when not in use. The Rev-A-Shelf RAS-ML-HDCR is a chrome mixer lift mechanism for full height cabinets, and it attaches to a custom shelf so the setup can match your cabinet interior or countertop plan. This appliance lift features adjustable spring tension and is rated to hold appliances up to 60 lb. For buyers searching rev a shelf, revashelf, or a mixerlift for a serious base cabinet organizer project, this model is supplied as the lift mechanism only. The shelf is not included and must be ordered separately, so cabinet opening size and shelf planning should be confirmed before purchase.

Use chrome mixer lift advantages daily

• Chrome mixer lift mechanism - The chrome finish gives the Rev-A-Shelf appliance lift a clean look inside the cabinet while supporting a dedicated storage-and-lift setup.
• Adjustable spring tension - Spring tension can be tuned to better match the appliance weight and improve lift control during everyday use.
• Holds appliances up to 60 lb - The mixer lift is built for heavier countertop appliances that are awkward to move by hand.
• Fits full height cabinet sizes with a custom shelf - The appliance lift can be attached to a buyer-supplied shelf for a cabinet-specific installation.
• Minimum face frame opening of 12 in x 23 in x 23-1/2 in - This gives installers a clear starting point for checking cabinet fit before ordering.
• Minimum frameless opening of 12-1/8 in x 23 in x 23-3/4 in - Frameless cabinet buyers can verify opening size before committing to the lift mechanism.
• Includes right and left arms with hardware - The core lift components are included for cabinet installation, reducing guesswork on the main mechanism parts.
• Shelf not included - Buyers can choose or build a custom shelf that matches the cabinet interior and intended appliance footprint.
• Product weight of 14.95 lb - The listed product weight helps with receiving, handling, and planning for installation.

Confirm appliance lift specs before ordering

Key specs to confirm: This appliance lift is intended for full height cabinet applications and requires a custom shelf. Minimum cabinet opening sizes are listed as 12 in x 23 in x 23-1/2 in for face frame cabinets and 12-1/8 in x 23 in x 23-3/4 in for frameless cabinets. The Rev-A-Shelf mixer lift features adjustable spring tension and is stated to hold appliances up to 60 lb. Before ordering, confirm your cabinet construction type, clear opening dimensions, interior depth, and the shelf size needed for your appliance. If any installation tolerance, long-term load use, or other technical detail is critical for your project, confirm it with the manufacturer or technical documentation.

What's included: Right and left arms and hardware are included with the Rev-A-Shelf RAS-ML-HDCR mixer lift. The shelf is not included and must be ordered separately.

What to verify before ordering: Confirm whether your cabinet is face frame or frameless, measure the minimum opening carefully, verify that your cabinet is a full height cabinet, and make sure your planned shelf and appliance fit the available interior space. Also confirm the appliance weight does not exceed 60 lb and review manufacturer installation guidance and local building requirements where applicable.

See mixer lift fit and use

Use a mixer lift for heavy appliances

A mixer lift is often chosen when a stand mixer or other countertop appliance is used often enough to keep nearby, but not often enough to leave on the counter full time. In that situation, the main pain point is weight and awkward handling. Carrying a heavy appliance out of a lower cabinet, setting it on the counter, and putting it back again can be inconvenient and can also slow down workflow in a busy kitchen.

The Rev-A-Shelf mixer lift addresses that use case by mounting inside a full height cabinet and attaching to a custom shelf. That setup lets the buyer match the shelf to the cabinet interior while using the lift mechanism to raise and lower the appliance. Because the spring tension is adjustable, the lift can be tuned for the appliance being stored, provided the appliance weight stays within the stated 60 lb capacity. For buyers searching for a chrome mixer lift, appliance lift, or mixerlift for a custom cabinet build, that combination of adjustable support and custom shelf compatibility is the key practical advantage.

This product can also help in remodels where countertop space is limited. Instead of dedicating permanent counter area to one appliance, the cabinet can hold the appliance below the work surface until needed. The product description states that the lift can be attached to any custom made shelf and therefore fit all full height cabinet sizes, but the buyer should still confirm the minimum opening dimensions for face frame or frameless construction before ordering. Shelf dimensions are not provided here, so that should be planned around the appliance footprint and interior cabinet space.

Installers and serious DIY buyers should also note that this is the mechanism only. The shelf is not included. That matters because shelf thickness, shelf size, and the final cabinet layout may affect the installation approach. If your project depends on exact mounting clearances or a specific appliance shape, those details should be checked against manufacturer guidance before purchase.

Compare appliance lift details that matter

When comparing one appliance lift to another, the first things that matter are usually fit, included components, and whether the mechanism matches the cabinet style. This Rev-A-Shelf mixer lift provides separate minimum opening dimensions for face frame and frameless cabinets, which helps buyers sort out compatibility early. That is more useful at the ordering stage than a vague statement about cabinet fit.

Another important comparison point is what the buyer actually receives. The RAS-ML-HDCR includes the right and left arms and hardware, but not the shelf. For some buyers, that is a practical advantage because a custom shelf can be built to suit the cabinet interior and appliance base. For other buyers, it means one more item must be sourced before installation. Either way, the product scope is clear and should reduce ordering mistakes.

The adjustable spring tension is also a meaningful detail because appliance weight can vary within the allowed range. Rather than treating all appliances the same, the mechanism can be set up for the intended load, up to the verified 60 lb limit. Buyers should still confirm that their specific appliance, shelf design, and cabinet dimensions work together as planned.

For trade buyers, a rev a shelf or revashelf branded mixer lift is often selected because the product data clearly identifies the application, included hardware, and minimum opening requirements. Those specifics support a cleaner planning process for cabinet organization work, especially when the project calls for a base cabinet organizer that keeps heavy appliances accessible without keeping them on the countertop.

Ask appliance lift fit questions first

Order your Rev-A-Shelf mixer lift

Rev-A-Shelf mixer lift is a practical choice when you need cabinet storage for a heavy countertop appliance and want a mechanism that works with a custom shelf. This RAS-ML-HDCR package includes the right and left arms plus hardware, while the shelf must be sourced separately. Before purchase, confirm whether your cabinet is face frame or frameless, check the minimum opening dimensions, and verify that your appliance weight is within the stated 60 lb limit. Those checks will help you match the appliance lift to the cabinet correctly.