Berenson Overture Series 5-1/16" (128 mm) Center to Center Rustic Nickel Pull, - 7105-1RN-C

Berenson Overture Series Rustic Nickel Pull Use

Berenson Overture Series rustic nickel pull is a zinc die cast cabinet handle designed to give doors and drawers a consistent 5-1/16 inch center to center grip, which helps align drilling layouts across a run of cabinets for a clean look. The pull length of 7 inches provides a substantial span for the hand, aiding comfortable operation on wider drawer fronts. A projection of 1-3/16 inches sets the handle off the face enough for fingers to wrap behind it, which supports confident opening even on heavier fronts. The 7/8 inch width creates a visible, easy-to-grab edge, which is useful where users have larger hands or work in busy shop environments. Rustic nickel finish delivers a muted metallic look, which helps this pull coordinate with common appliance and hinge finishes in kitchens, baths, and shop-built storage.

Functional Details That Support Cabinet Work

• The 5-1/16 inch (128 mm) center to center dimension matches a common drilling pattern, which simplifies layout on multi-cabinet runs and helps keep handle spacing visually consistent from unit to unit.
• The 7 inch overall length gives extra bar on each side of the mounting points, which helps the pull look balanced on wider drawer fronts and can visually anchor taller doors.
• The 1-3/16 inch projection holds the grip off the cabinet face, which reduces knuckle contact with the door surface and can minimize smudging or wear in high-use areas.
• The 7/8 inch width offers a broad contact surface, which provides a secure feel during pull and can be helpful where users prefer a more substantial handle profile.
• The base dimensions of 1-3/16 inch at each end define the footprint against the cabinet, which helps with accurate edge alignment and can cover minor imperfections around existing holes during retrofits.
• The zinc die cast material gives the pull a solid, consistent form, which supports uniform appearance across multiple pieces in the same installation run.

Installation Dimensions And Mounting Fit

The 5-1/16 inch (128 mm) center to center measurement sets the mounting hole spacing, which guides where to bore through doors and drawer fronts for proper fit. Using the 128 mm spacing lets installers tie into standard drilling jigs, which can speed repetitive layouts on multi-unit projects. The M4 x 45mm screw size defines the thread that engages the pull and the cabinet, which matters when working with typical door and drawer front thicknesses that suit this screw length. A 1-3/16 inch base dimension at each end gives a clear reference for positioning the pull relative to door edges, which helps set consistent reveals and align handles with neighboring cabinets in the same bank.

Cabinet Applications And Replacement Considerations

Where This Rustic Nickel Pull Works Well

The Overture Series 5-1/16 inch center to center rustic nickel pull is positioned for use on cabinet doors and drawers that call for a 128 mm drilling pattern, which is common in both new shop-built cases and many replacement scenarios. Its 7 inch overall length pairs efficiently with standard-width kitchen and vanity doors, which helps keep the hardware proportionate without overpowering smaller fronts. The rustic nickel finish offers a subdued metallic tone, which suits projects aiming for a transitional or slightly weathered look rather than a high-gloss appearance. In multi-cabinet installations, the combination of 7/8 inch width and 1-3/16 inch projection provides a repeatable hand feel from unit to unit, which matters in spaces where users move quickly between several drawers and doors.

Dimensions That Support Consistent Results

The defined 5-1/16 inch center to center spacing allows installers to rely on standard 128 mm drilling templates, which helps reduce layout errors and rework on longer banks of cabinets. A 1-3/16 inch projection creates enough clearance for a full finger grip, which can help with smooth operation on heavier drawers or loaded pantry doors. With 7/8 inch width, each pull presents a clear edge to grab, which can aid users with reduced dexterity who benefit from a more pronounced profile. The 1-3/16 inch base dimension at each mounting point also helps cover slightly worn or enlarged existing holes during hardware swaps, which is useful when updating older cabinetry to the Overture Series look. The zinc die cast construction provides a stable, repeatable form for every pull, which supports uniform alignment when installing a full room of matching hardware.

Common Questions About This Overture Series Pull

Select This Pull For 128 Mm Cabinet Layouts

The Berenson Overture Series 5-1/16 inch center to center rustic nickel pull combines a 128 mm drilling pattern, 7 inch overall length, and 1-3/16 inch projection to support consistent cabinet layouts. Using its defined width and base dimensions, installers can align multiple doors and drawers to the same visual rhythm across a room. For projects using zinc die cast hardware in a rustic nickel tone, this 7105-1RN-C pull offers a coordinated option that carries the same dimensions from cabinet to cabinet.