Berenson Overture Series 5-1/16" (128 mm) Center to Center Rustic Black Nickel Pull, - 7108-1RBN-C

Berenson Overture Series Pull For Cabinets

Berenson Overture Series pull gives you a 5-1/16 inch center to center handle that works well where a consistent grab point matters across multiple cabinet doors or drawers. The 7 inch overall length spans wider rail sections, helping the pull visually anchor larger fronts. Its 128 mm center to center layout matches common drilling patterns, which supports straightforward layout on face frames and frameless cabinets using metric spacing. The pull uses zinc die cast construction, providing a solid-feeling handle body for repeated daily use on doors and drawers. A rustic black nickel finish gives a dark, muted metal look that blends with a range of darker hinges and appliance finishes. With a base diameter of 1 inch at each mounting point, the pull spreads contact over a slightly larger surface area, which is useful when lining it up on painted or veneered faces.

Key Functional Details For Cabinet Projects

• The 5-1/16 inch (128 mm) center to center dimension keeps drilling locations consistent from cabinet to cabinet, which speeds layout when you are running a line of doors or drawers.
• The 7 inch overall length gives users a generous grip area, which helps on wider drawer fronts where a smaller pull might look undersized or feel cramped to grab.
• Zinc die cast material creates a single, rigid handle form, so the pull feels solid in the hand during repeated openings in kitchen, bath, or shop cabinetry.
• The rustic black nickel finish delivers a dark metallic appearance, which helps this pull coordinate with darker decorative hardware across the same installation.
• A 1 inch base diameter at each end offers a defined mounting footprint, which helps visually square the pull to door and drawer edges during installation.
• The 7/8 inch width across the grip area presents a comfortable edge to pull against, which supports easy operation even on heavier fronts.

Mounting Dimensions And Daily Use Comfort

The 5-1/16 inch center to center measurement provides a precise reference for drilling, which helps keep pulls aligned in straight lines across upper and lower cabinets. The pull projects 1-3/16 inches off the surface, giving enough finger clearance between the back of the hand and the door or drawer face during opening. At 7/8 inch width, the grip area feels substantial without crowding the front, which is practical on both narrow doors and wider drawers. The 1 inch base diameter at each mounting point offers a clear visual reference when squaring the pull to edges or stiles, helping maintain consistent reveal distances across an entire run.

Using This 7108-1RBN-C Pull In Real Projects

Where This Rustic Black Nickel Pull Fits Best

This Berenson Overture Series 7108-1RBN-C pull, with its rustic black nickel finish, works well on cabinet doors and drawers where a darker, subdued metal tone is preferred. The 7 inch overall length pairs effectively with medium to large fronts, because the longer handle balances the scale of the face. The 5-1/16 inch (128 mm) center to center spacing suits projects laid out in either imperial or metric systems, thanks to the clearly defined dimensions. With a 1 inch base diameter and 7/8 inch width, the pull visually covers the mounting area while still leaving plenty of surrounding door or drawer surface visible. The 1-3/16 inch projection keeps the hand slightly away from the cabinet face, which is useful on doors adjacent to tall panels or appliances.

Details That Support Repeatable Cabinet Installations

The defined 5-1/16 inch center to center spacing makes it easy to standardize jig settings so that every pull lands in the same position, reducing layout time on multi-cabinet runs. The zinc die cast material creates a uniform, consistent profile from piece to piece, which helps cabinet lines look even when viewed across an entire wall. The rustic black nickel finish keeps reflections low, which can be helpful under strong lighting where highly reflective hardware might stand out too much. A 1 inch base diameter on each end gives a clear circle to align against reference marks, helping pulls track parallel to door edges. The 7/8 inch grip width and 1-3/16 inch projection together provide a comfortable grab point, supporting repeatable user feel on every opening. With the M4 x 45mm screw size specified for this pull, installers can match their boring depth and fastener selection directly to that metric thread standard.

Common Questions About This Berenson Overture Pull

Selecting This Pull For Your Next Cabinet Run

The Berenson Overture Series pull 7108-1RBN-C combines a 5-1/16 inch (128 mm) center to center layout with a 7 inch overall length, giving cabinets a consistent, full-size handle footprint. Zinc die cast construction and a rustic black nickel finish deliver a solid, dark-toned pull that fits well on many cabinet styles. With defined dimensions for length, projection, width, base diameter, and the M4 x 45mm screw size, this pull slots cleanly into planned drilling patterns and hardware schedules for professional and serious DIY cabinet projects.