Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Overture brushed nickel pull gives cabinets a zinc die cast handle in a practical, brushed nickel finish, so doors and drawers gain a consistent look across a project. The Overture Series designation ties this pull into a defined Berenson collection, which helps keep hardware style uniform on multi-opening runs. A 3-3/4 inch (96 mm) center to center drilling pattern sets a common hole spacing, which works well for standard cabinet layouts and repeatable boring setups. Overall length of 5-3/8 inch provides hand clearance across wider drawer fronts while staying proportional on doors. A 3/4 inch width creates a solid grip area without crowding narrow rails. Projection of 1-1/16 inch stands the pull off the face just enough for fingers, supporting comfortable operation on frequently used cabinets.
The 96 mm center to center layout on this Berenson Overture brushed nickel pull provides a straightforward drilling pattern, which aligns well with standard cabinet hardware boring setups. Using the 3-3/4 inch spacing as a constant across fronts lets rows of pulls line up visually along rails and across drawer banks. The pull length of 5-3/8 inch defines how far the handle will reach toward the center of a door or drawer, which matters when balancing sightlines with other hardware in a run. A 3/4 inch width and 1-1/16 inch projection work together to create a defined gripping edge, which supports comfortable use without requiring deep recesses or special edge details in the cabinet face.
This Overture Series zinc die cast pull with brushed nickel finish fits cabinet doors and drawers where a 3-3/4 inch (96 mm) center to center drilling pattern is used, so it can be applied consistently on base, wall, and tall units. The 5-3/8 inch overall length suits typical residential cabinet front widths, which helps the pull look balanced whether it is mounted vertically on doors or horizontally on drawers. A 3/4 inch width provides enough surface to grab on thicker drawer fronts, so users get reliable contact even when approaching the pull from an angle. The 1-1/16 inch projection stands the handle away from the cabinet face, which gives fingers room between the pull and door or drawer surface during operation. Being part of the Berenson Overture Series helps this pull coordinate with other pieces from the same family, which supports a unified hardware appearance in kitchens, baths, and built-ins.
The 96 mm center to center dimension on this 7109-1BPN-C Berenson pull sets a defined mounting standard, which streamlines layout when drilling multiple fronts and aids future replacement of similar-size pulls. Using the 3-3/4 inch spacing keeps hardware alignment predictable, which helps maintain straight visual lines along cabinet runs. The zinc die cast material gives the pull a solid form, which supports tight mounting against the cabinet face for a clean profile. A brushed nickel finish over that zinc base creates a uniform appearance that works well alongside other brushed nickel decorative hardware, which is helpful on jobs where hinges, knobs, and pulls share the same finish family. The 3/4 inch width and 1-1/16 inch projection specify the hand clearance envelope, which can influence decisions on door overlay and reveal when coordinating with adjacent fronts. Together, these dimensions define how the pull will perform and present on finished cabinetry.
The Berenson Overture brushed nickel pull has a 3-3/4 inch (96 mm) center to center size, which sets the hole spacing for drilling and aligns with common cabinet hardware layouts.
The 7109-1BPN-C Berenson pull measures 5-3/8 inch in overall length, which affects how much of the rail or drawer front the handle will visually span.
The Overture Series pull is made from zinc die cast material, which provides a consistent, solid body for mounting on cabinet doors and drawers.
This cabinet pull has a brushed nickel finish, which gives it a muted metallic look that works with other brushed nickel decorative hardware.
The pull projects 1-1/16 inch from the cabinet face, which defines finger clearance between the handle and the door or drawer surface during use.
This Berenson pull has a 3/4 inch width and a 1 inch base diameter, which shape the footprint on the cabinet surface and the feel of the gripping area.
The Berenson Overture brushed nickel pull with 3-3/4 inch (96 mm) center to center sizing offers a defined pattern for cabinet hardware runs, so layouts stay consistent from piece to piece. Zinc die cast construction and brushed nickel finish create a unified appearance that pairs with other brushed nickel elements in the space. With its 5-3/8 inch length, 3/4 inch width, 1-1/16 inch projection, and 1 inch base diameter, this pull provides clear dimensions to match against drilling plans and cabinet fronts. Choose this Overture Series model when a 96 mm center to center pull in brushed nickel is specified across a project.
