Berenson Overture Series 3-3/4" (96 mm) Center to Center Rustic Nickel Pull, - 7110-1RN-C
Description
Overture Pull 96mm Center To Center For Cabinets
Overture pull 96mm center to center describes a Berenson Overture Series pull with a 3-3/4 inch (96 mm) center to center dimension, which sets drilled hole spacing so installers can line this handle up accurately on cabinet doors and drawers. The pull is made from zinc die cast, giving a solid metal construction that supports everyday cabinet use in kitchens, baths, and casework. Its rustic nickel finish provides a muted metallic look that pairs with traditional and transitional cabinet styles while helping visual fingerprints stay less obvious in busy spaces. The overall length of 5-3/8 inches gives users a comfortable grip area that works on both narrow and wider drawer fronts. A projection of 1-1/16 inches spaces fingers away from the cabinet face, which helps reduce knuckle scraping when operating heavier drawers.
Key Overture Series Pull Details For Projects
- The 3-3/4 inch (96 mm) center to center measurement sets precise mounting hole spacing, which matters when laying out drilling jigs and keeping pulls aligned across a run of doors or drawers.
- The pull length of 5-3/8 inches gives a broader gripping surface, which helps users get better leverage on wider or taller fronts without crowding their fingers or the cabinet edge.
- A projection of 1-1/16 inches stands the pull off the face of the cabinet, which helps hands clear raised panels or trim profiles while opening and closing doors and drawers.
- The 3/4 inch width provides a comfortable edge to grab, which supports repeat use on heavy or frequently accessed cabinet sections in kitchens, laundry rooms, or shop storage.
- The rustic nickel finish offers a distinctive tone within the nickel family, which helps installers coordinate this pull with hinges, latches, and other visible hardware in similar finishes.
- The Overture Series identity keeps this pull visually consistent with other Berenson pieces, which matters when completing multi-room layouts that rely on the same collection.
Mounting And Fit Details For This Rustic Nickel Pull
The 3-3/4 inch (96 mm) center to center drilling requirement defines how this pull mounts to cabinet doors and drawers, so layouts can be repeated across a project without shifting templates. A base diameter of 1 inch at each post sets the footprint on the cabinet surface, which helps cover standard drill holes and minor chipping around the bore. The zinc die cast construction gives a defined shape at the feet and grip, which helps the pull sit flush against flat or slightly profiled faces. With a projection of 1-1/16 inches, this pull maintains clearance from the cabinet face, which is useful when installing on doors with thicker edge profiles or applied moldings.
Using The Berenson Overture Pull In Cabinet Work
Where This Berenson Overture Series Pull Fits Best
The Berenson Overture Series 3-3/4 inch (96 mm) center to center rustic nickel pull works well on cabinet doors and drawers that follow standard 96 mm drilling patterns, which are common in both framed and frameless cabinetry. Its 5-3/8 inch overall length lets installers use the pull comfortably on small vanity drawers and larger kitchen drawers without changing hardware size mid-run. The 3/4 inch width and 1-1/16 inch projection create a hand-friendly profile, which supports repeated opening and closing on high-traffic cabinets in residential or light commercial spaces. The rustic nickel finish coordinates with other nickel-toned hardware, which helps designers keep a consistent look on hinges, backplates, and matching pulls within the same area.
Details That Support Alignment And Repeatable Results
The 3-3/4 inch (96 mm) center to center spacing gives a fixed measurement for drilling jigs, which helps installers maintain straight lines of pulls across banks of drawers and tall pantry doors. The 1 inch base diameter at each post provides a defined contact area on the cabinet face, which can cover slight inaccuracies around drill holes and leave a clean edge around the post. The zinc die cast material allows tight casting at the mounting feet, which helps the pull seat firmly against the door or drawer front for a solid feel in use. With a 1-1/16 inch projection, the pull keeps fingers away from the cabinet surface, which is especially useful when aligning multiple pulls near adjacent walls, appliances, or tall face frames.
Common Questions About This Overture Cabinet Pull
What does the 3-3/4 inch center to center size mean?
The 3-3/4 inch (96 mm) center to center size describes the distance between mounting holes, which sets drill locations and keeps pulls aligned along doors and drawers.
How long is the Berenson Overture rustic nickel pull overall?
The Berenson Overture rustic nickel pull has a length of 5-3/8 inches, which provides a generous gripping area suitable for both narrow doors and wider drawer fronts.
What material is the Overture Series 7110-1RN-C pull made from?
The Overture Series 7110-1RN-C pull is made from zinc die cast, which gives a solid metal body shaped for consistent mounting and everyday cabinet operation.
How far does this rustic nickel pull project from the cabinet face?
This rustic nickel pull has a projection of 1-1/16 inches, which spaces the grip off the door or drawer front to improve finger clearance during use.
What are the base and width dimensions of this cabinet pull?
This cabinet pull has a 1 inch base diameter and a 3/4 inch width, which defines its footprint on the cabinet surface and the thickness of the grip.
Which finish is used on the Berenson Overture 7110-1RN-C pull?
The Berenson Overture 7110-1RN-C pull uses a rustic nickel finish, which offers a distinctive nickel tone suited to many cabinet and furniture styles.
Select This Overture Pull For 96mm Layouts
The Berenson Overture Series 3-3/4 inch (96 mm) center to center rustic nickel pull ties together zinc die cast construction, 5-3/8 inch overall length, and 1-1/16 inch projection to support practical cabinet operation. At Wurth Baer Supply, this 7110-1RN-C pull gives installers and shop builders a consistent option for projects built around standard 96 mm drilling patterns and rustic nickel hardware schemes.