Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Overture Series pull gives you a 3-3/4 inch center to center handle that lines up with common drilled cabinet holes, so swapping or laying out pulls stays straightforward on new or existing doors and drawers. The pull is made from zinc die cast, which creates a solid metal body for consistent shape and feel from piece to piece in a run of cabinets. Its rustic black finish provides a dark, aged look that works where you want contrast against lighter fronts or a low-glare tone on darker projects. With a total length of 5-3/8 inches, the pull spans enough area on the face for a full-hand grip while still fitting well on standard cabinet rails and drawer fronts. The Berenson brand and Overture Series identity help you match this pull with other handles from the same family across a job.
The 3-3/4 inch center to center drilling dimension works with many standard jig settings, so installers can repeat hole locations quickly along a run of cabinets. A 1 inch base diameter at each mounting point gives the pull a defined footprint, which helps cover minor chipping around the bore holes and creates a clean transition from metal to door surface. With a 1-1/16 inch projection, the pull stands off the cabinet face enough for a comfortable finger clearance without sticking out excessively into walkways. The specified width of 3/4 inch balances the projection and length, so the handle looks consistent on both doors and drawers. The M4 x 45mm screw size specification ties directly to typical cabinet bore sizing, helping match drill bits and threads during install.
The 3-3/4 inch center to center layout positions this pull well on standard residential kitchen, bath, and casework cabinets where that drilling pattern is already common. Its 5-3/8 inch overall length suits medium-width drawer fronts and door rails, keeping the handle visually balanced across most cabinet face sizes. The rustic black finish supports projects aiming for a darker, slightly weathered hardware look, pairing well with painted wood, stained woods, or laminate surfaces that lean warm or neutral. With a 1-1/16 inch projection, the pull creates a comfortable gap for fingers behind the bar, which is helpful on thicker drawer fronts where shallow pulls can feel tight. The 1 inch base diameter on each end sits neatly on typical stile and rail widths, so the pull does not crowd edges on framed construction. As a Berenson Overture Series pull, it can be used alongside other Overture pieces to keep hardware style consistent across larger installations. The defined 3/4 inch width complements narrow doors while still looking substantial on wider drawers, so one size can often cover many positions.
The 96mm, or 3-3/4 inch, center to center spacing allows installers to use existing drilling templates designed around that common measurement, tightening layout time and reducing layout errors from manual measuring. Zinc die cast construction helps every pull match the same shape and feel, which keeps sight lines straight when multiple handles are installed in rows. The 1-1/16 inch projection keeps the hand away from the cabinet face as you pull, helping protect finished surfaces from repeated knuckle contact. A 3/4 inch width keeps the pull from feeling bulky while still giving enough front area to grip, which can be useful on smaller doors where oversized hardware could dominate the panel. The 1 inch base diameter offers enough coverage to hide minor imperfections around the drilled holes, which is helpful during replacement work on older fronts. The M4 x 45mm screw size specification standardizes the connection point, supporting predictable threading into typical cabinet door and drawer materials when matched with appropriate pilot holes. The rustic black finish provides an intentionally varied dark tone, which can help hardware visually blend with other dark metals on the project.
The Berenson Overture Series pull uses a 3-3/4 inch, or 96mm, center to center measurement, which aligns with many standard cabinet drilling patterns for straightforward layout.
The pull length is 5-3/8 inches, giving a comfortable gripping span across typical cabinet doors and drawer fronts without overpowering narrower faces.
The pull is zinc die cast, providing a solid metal body that maintains a consistent profile across multiple handles installed on the same project.
The projection is 1-1/16 inches, creating enough space for fingers behind the pull while keeping the handle relatively low profile on the cabinet face.
The pull has a 3/4 inch width and a 1 inch base diameter at each end, which helps cover the bore area and maintain a balanced look on stiles and rails.
The pull uses M4 x 45mm screws, matching common cabinet hardware threading so the handle fastens securely through typical door and drawer thicknesses.
This Berenson Overture Series pull in rustic black uses a 3-3/4 inch center to center drilling pattern, making it a practical choice when you want to match common cabinet layouts. Its zinc die cast construction, 5-3/8 inch overall length, and 1-1/16 inch projection support comfortable everyday use on both doors and drawers. The defined 3/4 inch width and 1 inch base diameter help the pull sit cleanly on standard stiles and rails. For projects that call for a dark, rustic metal tone with consistent dimensions across a run of cabinets, this pull offers a clearly specified option ready for layout and installation.
Sold In: 1 Each
