Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Sonata rustic brushed brass pull is a zinc die cast handle from the Sonata collection designed for decorative cabinet and furniture use. The material being zinc die cast creates a consistent, solid pull body that supports repeatable alignment across multiple fronts. The rustic antique brass finish delivers a specific warm tone that visually suits traditional and transitional projects where visible metalwork is part of the design. The 3-3/4 inch center to center dimension sets a fixed hole spread that works wherever that drilling pattern is already laid out. Overall length of 4-11/16 inches gives finger clearance past the screw locations, which supports comfortable everyday operation on doors and drawers. A 1 inch projection holds the grip away from the surface enough for fingers while keeping the pull tight to the face for a compact profile. The 1 inch width provides a stable gripping surface along the front.
The Sonata pull 96mm center to center layout matches the 3-3/4 inch spacing listed for this model, so metric and imperial hole patterns align for straightforward installation on pre-drilled fronts. Screw size M4 x 45mm defines the thread and length pairing this pull is designed to mount with, which guides drilling size and grip expectations in common cabinet materials. A base diameter of 3/8 inch at each foot concentrates contact around the mounting points, giving a clean landing area against the cabinet face. The 1 inch projection and 1 inch width work together to define the pull envelope off the surface, helping installers visualize door swing clearances and drawer front spacing when laying out multiple handles in a run.
This Berenson Sonata cabinet pull belongs to the Sonata collection, so its form and finish align with other Sonata pieces when a coordinated hardware layout is important. The rustic brushed brass appearance, described as rustic antique brass, suits cabinets and furniture where a brushed, timeworn metal look supports the overall design. Its classification as decorative hardware and moldings under handles and pulls means it is intended for doors and drawers rather than structural framing, focusing its role on user touch points. With a 3-3/4 inch center to center measurement, the pull fits layouts that follow this common drilling pattern, keeping rows of cabinet hardware visually consistent. The 4-11/16 inch length spans enough of the front to read as a substantial handle on base and wall cabinets while still working on smaller drawers. The 1 inch projection balances functional grip depth with a low profile, which matters on tight walkways or tall pantry doors where hardware projects into traffic paths.
The specified 96mm center to center dimension, paired with the 3-3/4 inch callout, gives installers and shop teams a precise drilling reference that translates cleanly between metric tooling and imperial layouts. Using a known M4 x 45mm screw size allows jigs, bits, and drilling practices built around M4 hardware to be used from project to project. Zinc die cast construction keeps the pull dimensions consistent from piece to piece, supporting templates and story sticks that rely on uniform foot positions. The 3/8 inch base diameter at each end defines the footprint that seats to the cabinet face, helping conceal slight drilling variances within that circular contact area. A 1 inch wide gripping surface gives users the same hand feel whether the pull is mounted horizontally on drawers or vertically on doors, simplifying hardware standards across a job. The blend of rustic antique brass finish with this standardized size set lets designers repeat a single part number, 7120-1RAB-C, wherever this look and spacing are specified.
The Berenson Sonata cabinet pull has a 3-3/4 inch, or 96mm, center to center spacing, so it aligns with drilling patterns set to that common hole spread.
The Sonata 7120-1RAB-C pull has an overall length of 4-11/16 inches, providing extended coverage across the cabinet face for both doors and drawers.
This cabinet pull is made from zinc die cast material with a rustic antique brass finish, giving a solid metal body with a brushed, aged brass appearance.
The Sonata pull has a 1 inch projection and 1 inch width, creating a compact profile that still provides adequate finger clearance for everyday opening.
The specified screw size for mounting this pull is M4 x 45mm, so the pull is designed around that metric thread and length combination.
The 3/8 inch base diameter describes the footprint of each mounting foot against the cabinet face, helping cover the area around each drilled hole.
The Berenson Sonata rustic brushed brass pull uses a 3-3/4 inch (96mm) center to center layout, zinc die cast construction, and a rustic antique brass finish to deliver a consistent handle standard across doors and drawers. Its 4-11/16 inch overall length, 1 inch projection, and 1 inch width create a defined size that fits many cabinet and furniture fronts using this spacing. With the 7120-1RAB-C part number, it matches the Sonata collection profile for projects calling for this specific combination of dimensions and finish.
Sold In: 1 Each
