
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Berenson Sonata rustic nickel pull is a zinc die cast cabinet handle designed for decorative hardware applications, so it serves both as a grip point and a visual detail on doors and drawers. The Sonata Series identity ties this pull to a coordinated Berenson collection, which helps keep hardware style consistent across a room. Its rustic nickel finish provides a subdued metallic look, which supports projects aiming for a worn-in or transitional appearance on cabinetry. The handle uses a 3-3/4 inch center to center mounting, also described as 96mm, which matches common drilling patterns in many cabinet layouts and helps streamline layout work. Overall length of 4-11/16 inches gives more hand contact area than the bore spacing alone, which can improve feel when opening heavier cabinet fronts. A 1 inch projection and 1 inch width set how far the pull stands off the face, which affects clearance around door edges.
The Sonata Series cabinet pull uses a 3-3/4 inch (96mm) center to center layout, which sets the required drilling pattern for mounting. This consistent spacing helps during production work where repeated boring is needed across multiple doors and drawers. The pull length of 4-11/16 inches means the handle overhangs past the mounting points, which affects how far it reaches across a drawer front and can help line up with design elements on wider fronts. A 1 inch projection keeps the grip close to the cabinet face, which is useful where doors may open near walls or tall panels. The 1 inch width defines the front profile, which influences how the pull aligns visually with narrow or wide rails on cabinet doors.
This Berenson Sonata Series pull is positioned for use on cabinet doors and drawers within decorative hardware and moldings projects, so it fits typical kitchen, bath, or built-in cabinet layouts. The 3-3/4 inch center to center measurement targets one of the most common cabinet pull drilling patterns, which makes it suitable for both new casework and many retrofits that already use this spacing. The rustic nickel finish supports applications seeking a softened metallic tone instead of high-gloss surfaces, which can coordinate with similar finishes on other hardware elements. Because the pull spans 4-11/16 inches in length, it presents a substantial visual line on the front, which suits medium-width doors and standard drawers where proportional hardware is important. The 1 inch projection also keeps the handle from extending excessively into walkways, which matters on tight runs of cabinetry.
The defined 96mm (3-3/4 inch) center to center dimension allows installers to use fixed boring jigs, which helps maintain consistent alignment from one cabinet front to the next across a project. Zinc die cast construction gives each Sonata pull the same molded geometry, which supports repeatable reveals and uniform shadow lines when several pulls are installed in a straight run. The combination of 1 inch projection and 1 inch width sets a predictable hand clearance profile, which can be factored into planning where doors open toward walls or appliances. The rustic nickel finish appears across the pull surfaces, which helps installations look consistent when multiple units are mounted at eye level. The 4-11/16 inch overall length remains the same piece to piece, which aids in lining up hardware visually across stacked drawer banks.
The Sonata pull uses a 3-3/4 inch (96mm) center to center drilling pattern, which sets the spacing between mounting holes and aligns with a widely used cabinet hardware layout.
The Berenson Sonata cabinet pull measures 4-11/16 inches in overall length, which affects how much of the drawer or door front it visually spans.
The 7121-1RN-C Sonata pull is made from zinc die cast, which provides a solid molded body and consistent shape across multiple pulls on a project.
The rustic nickel pull has a 1 inch projection, which determines how far it stands off the cabinet face and influences hand clearance near adjacent surfaces.
The Berenson Sonata Series pull has a 1 inch width, which affects its front profile and how it lines up with cabinet rails and drawer heights.
The 3-3/4 inch Sonata pull has a rustic nickel finish, which provides a muted metallic look suited to many cabinet hardware color schemes.
The Sonata Series 3-3/4 inch center to center rustic nickel pull pairs a defined 96mm drilling pattern with a 4-11/16 inch overall length, which fits many standard cabinet layouts. Zinc die cast construction and a rustic nickel finish support coordinated decorative hardware projects. The 1 inch projection and 1 inch width set a predictable grip depth and front profile, which simplifies planning across doors and drawers. For projects built around Berenson decorative hardware, this Sonata pull offers dimensions and finish that align with common cabinet installations.
Sold In: 1 Each