Choose a Rev-A-Shelf cutlery tray

Rev-A-Shelf cutlery tray gives kitchen drawers a defined place for forks, spoons, knives, and other everyday utensils. This cutlery tray insert is a glossy silver plastic organizer from Rev-A-Shelf Corporation, made for drawer use and built from heavy gauge plastic. The tray measures 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Buyers looking for a silver cutlery tray or practical drawer inserts often need a piece that can be trimmed to fit drawer dimensions, and this model is part of that standard plastic insert offering. The rev a shelf design also ships with a clear protective coating that should be peeled off before use. For installers and serious DIY buyers, that means a ready-to-fit cutlery divider with known overall size and a finish intended for visible drawer organization.

See how this cutlery tray helps

• 14-1/4 inch width - Helps buyers match the Rev-A-Shelf drawer insert to drawer interior width before trimming or final placement.
• 21-1/4 inch depth - Gives the cutlery tray insert a long front-to-back layout suited to many kitchen utensil drawers.
• 2-3/8 inch height - Helps confirm drawer side clearance and vertical fit before ordering the silver cutlery tray.
• Heavy gauge plastic construction - Provides a rigid plastic cutlery tray body for daily drawer use.
• Glossy silver finish - Gives the cutlery tray a clean, visible look that coordinates with modern drawer interiors.
• Standard plastic drawer insert format - Makes this Rev-A-Shelf cutlery tray familiar to installers specifying drawer inserts for kitchen projects.
• Can be trimmed to accommodate drawer dimensions - Helps buyers adapt the cutlery divider to drawers that do not match the tray's exact factory size.
• Clear protective coating included for shipping - Helps keep the visible surface protected until installation and should be peeled off before use.

Confirm cutlery tray insert fit details

Key specs to confirm: This cutlery tray insert measures 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. For this product type, buyers should confirm the actual inside drawer width, inside drawer depth, and usable height above the drawer bottom before ordering. Because the product data states that these drawer inserts can be trimmed to accommodate drawer dimensions, confirm where trimming is acceptable in your application and how much material your drawer layout allows you to remove. Safety, load, compliance, and any installation hardware details are not provided in the verified data and should be confirmed with the manufacturer or technical documentation if required for your project.

What's included: Verified data confirms one Rev-A-Shelf GCT Series glossy silver cutlery tray insert with a clear protective coating applied for shipping. Peel off the coating before use.

What to verify before ordering: Check your drawer's inside measurements, confirm the drawer can accept a 2-3/8 inch deep organizer, verify whether trimming is needed, and confirm that the silver finish and tray layout fit the kitchen or bath cabinet application you are planning.

Match this silver cutlery tray to use

Use this cutlery divider in busy drawers

A cutlery divider is often chosen when a drawer has enough footprint for organized utensil storage but still needs a clean, repeatable layout. In a kitchen remodel, a professional installer may need drawer inserts that fit a standard drawer box while still allowing field adjustment. In that case, this Rev-A-Shelf cutlery tray offers a known starting size of 14-1/4 inches by 21-1/4 inches with a 2-3/8 inch height, plus the verified ability to be trimmed to accommodate drawer dimensions.

That matters in real jobs where drawer interiors vary slightly by box construction, slide clearance, or side thickness. A serious DIY buyer may also be replacing an older plastic organizer that slides around or wastes space. This silver cutlery tray gives that buyer a heavy gauge plastic tray with a glossy finish and a defined insert format rather than a loose bin. Because it ships with a clear protective coating, the visible surface is protected until the final stage of installation.

For everyday use, the main benefit of a cutlery tray insert is simple organization. Forks, spoons, knives, and serving pieces are easier to separate when the drawer insert matches the available space. Buyers searching revashelf, rev a shelf, or RSGCT-2S-52 usually want a product-specific organizer they can size to the drawer instead of guessing with generic trays. If your drawer has unusual inside dimensions, confirm the trim plan before purchase. If your project has special sanitation, code, or institutional requirements, those details are not listed in the verified product data and should be checked separately.

Compare this cutlery tray with basic inserts

When comparing a branded cutlery tray with a basic organizer, most buyers focus on material, dimensions, finish, and whether the insert can be adapted to the drawer. This Rev-A-Shelf drawer insert provides verified dimensions, a glossy silver finish, and heavy gauge plastic construction. Those facts give buyers more to work from than an unspecified tray with unclear sizing.

Another useful difference is fit planning. The product data states that these standard plastic drawer inserts can be trimmed to accommodate drawer dimensions. For installers, that can reduce guesswork when the drawer opening is close to, but not exactly, the tray size. For homeowners, it means the cutlery tray may suit a project where a fixed-size insert would not. The protective coating is also a practical detail because it helps preserve the visible finish until the tray is ready to be placed into service.

This does not replace the need to verify your drawer interior. Generic inserts and branded inserts alike must still match the usable width, depth, and height of the drawer. Before ordering, confirm that your application needs a silver cutlery tray, confirm that trimming is appropriate for your layout, and confirm any project-specific installation guidance from the manufacturer.

Review cutlery tray ordering questions

Order the right Rev-A-Shelf drawer insert

Rev-A-Shelf drawer insert selection is easier when you start with verified size, material, and finish. This cutlery tray insert is a glossy silver heavy gauge plastic organizer sized at 14-1/4 inches wide, 21-1/4 inches deep, and 2-3/8 inches high. Before purchase, confirm your drawer interior measurements, whether trimming is needed, and that the included tray format matches your storage plan. Also confirm any unlisted hardware or technical requirements if your project needs them.