Amerock Forgings Oil Rubbed Bronze Knob Details

Amerock Forgings oil rubbed bronze knob is a 1-1/4 inch (32 mm) diameter cabinet knob designed for kitchen or bath projects where a bold, rugged look is important. The Forgings Collection has the look of hand-crafted, artisan-quality hardware, so this knob helps carry that style consistently across doors and drawers. The oil-rubbed bronze finish provides a dark, warm tone that works well on many wood species and stains, supporting a coordinated appearance across a run of cabinets. Its knob diameter of 1-1/4 inch gives a substantial grip point, which helps with comfortable operation on heavier cabinet fronts. A projection of 1-1/8 inch spaces hands away from the door surface, which matters when working near adjacent hardware or trim. The knob is built from zinc die-cast material, giving a solid feel in everyday cabinet use.

Key Amerock Forgings Knob Functional Advantages

• The 1-1/4 inch (32 mm) diameter knob face offers a broad contact surface, which helps fingers get a dependable pull on cabinet doors and drawers during daily operation.
• The 1-1/8 inch projection positions the knob far enough off the front, which helps reduce knuckle contact with the cabinet face and gives room when working near neighboring hardware.
• The oil-rubbed bronze finish presents a dark, traditional appearance, which supports visual alignment with other oil-rubbed bronze components already specified on the same project.
• The zinc die-cast construction provides a solid metal body, which supports consistent feel across multiple openings on frequently used kitchen or bath cabinets.
• The 1-1/4 inch (32 mm) stated width matches the diameter, which simplifies layout when spacing multiple knobs in a straight line across doors and drawer fronts.

Amerock Forgings Knob Fit And Mounting Details

This Amerock Forgings cabinet knob uses an 8-32 x 1 inch screw size, which matches common cabinet drilling practices and supports straightforward mounting into standard cabinet door and drawer fronts. The base diameter of 7/16 inch defines the footprint against the cabinet surface, which helps with layout around narrow stiles or rail profiles. With a 1-1/4 inch diameter and 1-1/8 inch projection, the knob suits typical face-frame or frameless cabinet doors where clearance and hand space are needed. The 1-1/4 inch (32 mm) width aligns with the diameter, which assists when aligning this knob visually with other 32 mm-based hardware across a project.

Using The BP4425ORB Knob In Real Projects

Where The BP4425ORB Amerock Knob Performs Well

The Amerock Forgings Series oil rubbed bronze 1-1/4 inch diameter knob works effectively on kitchen and bath cabinets where a hand-crafted, artisan-quality appearance is desired. Its oil-rubbed bronze finish pairs with traditional or rustic cabinet door styles, so it can be used on both raised panel and flat panel fronts in the same space. The 1-1/4 inch (32 mm) diameter knob face provides a comfortable grip for doors and medium-width drawers, supporting repeated use in high-traffic zones such as sink bases and main storage banks. With a projection of 1-1/8 inch, the knob functions well on standard cabinet depths, allowing fingers to wrap behind the knob without conflicting with decorative edge profiles. The zinc die-cast material suits interior cabinet environments, handling typical residential kitchen or bath humidity and daily contact.

Why These Amerock Forgings Details Support Consistency

The Amerock Corporation BP4425ORB part number identifies this specific Forgings Series knob, which helps maintain consistent hardware selection across multiple rooms or phases of a project. The stated 1-1/4 inch (32 mm) diameter and matching width allow installers to repeat drilling locations and visual spacing, supporting uniform alignment from cabinet to cabinet. The 7/16 inch base diameter creates a defined contact circle on the door surface, which helps with centering on narrow rails and keeps the contact area predictable when laying out multiple knobs on a large run of fronts. The 8-32 x 1 inch screw size matches a common thread and length for cabinetry, which simplifies planning around door and drawer front thicknesses used in many woodworking jobs. Together, these defined dimensions allow this knob to be specified repeatedly with reliable visual and functional results.

Common Questions About The BP4425ORB Forgings Knob

Selecting This Amerock Forgings Knob For Your Job

The Amerock Forgings Series BP4425ORB knob combines a 1-1/4 inch (32 mm) diameter, 1-1/8 inch projection, and oil-rubbed bronze finish to support both function and appearance on kitchen and bath cabinets. Its zinc die-cast construction and defined 7/16 inch base diameter give predictable contact and feel on doors and drawers. With an 8-32 x 1 inch screw size and clearly stated dimensions, this oil rubbed bronze cabinet knob can be specified wherever a coordinated Forgings Collection look is needed across a woodworking project.