
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
3/8 inch oak wood screw hole plug describes an unfinished oak plug that fills 3/8 inch screw holes, so it lets you conceal fastener points while keeping a wood surface ready for your own finishing system. The screw plug is described as flat, which means it sits flush to the surrounding material when properly cut and sanded, helping you maintain a smooth surface on cabinetry or trim. The plug is made from oak, and that shared wood species helps the filled hole blend visually with oak workpieces after you stain or topcoat. The product is identified as unfinished, so the surface accepts stains, dyes, or clear finishes on the jobsite. The plug diameter is specified as 3/8 inch, which gives you a defined drill or counterbore size when planning fastener locations and matching drills. The item is supplied under part number OF0375, giving you a consistent reference for repeat orders.
The 3/8 inch diameter on this unfinished oak plug ties directly to your drilling setup, because using a 3/8 inch bit or counterbore creates a snug cavity sized for the plug. The flat style of the plug works with standard trimming tools, so you can cut it flush after installation and keep surfaces level. Oak material in the plug aligns with oak stock in face frames, doors, or applied trim, which means stain and clear finish steps proceed as a single operation across plug and field. The product is described as a screw plug, so its role is to occupy the void left by a 3/8 inch bore over a fastener head. This defined purpose lets you plan fastener layout exactly where you can later drill, plug, and sand for a cleaner presentation.
This unfinished oak wood screw hole plug is identified under the screw cover caps and washers category, which positions it for use anywhere exposed screw heads would distract from a finished oak surface. The 3/8 inch diameter supports use in face frames, stiles, rails, or wide trim where a slightly larger bore gives you room to clear fastener heads before plugging. The flat description means the plug is suited to surfaces that need to remain even, such as cabinet fronts, applied end panels, and casing faces. Oak construction ties it to projects built from oak components, so after sanding and finishing, the plugged area can track the tone of adjacent material. Because the plug is unfinished, you can handle color matching with your usual stains on doors, frames, or built-ins that share the same finish schedule.
The clearly stated 3/8 inch plug diameter gives you a fixed dimension to design around, which supports consistent boring operations across a run of doors, frames, or trim. When every hole is drilled for that same diameter, each plug can seat similarly, reducing variation in glue squeeze-out and trimming time. The flat style reinforces this consistency because flush trimming tools reference the surrounding face, allowing you to quickly bring the plug down to the surface without changing cutters between pieces. Unfinished oak construction matters because it removes a finish-layer variable; the plug accepts stain and topcoat at the same time as the rest of the component, helping color and sheen align. The classification as a screw cover cap signals that the plug is sized and shaped to sit over or ahead of a screw location, enabling a planned sequence: fasten, bore 3/8 inch, install plug, then sand and finish as a single workflow.
The 3/8 inch oak wood screw hole plug is sized for 3/8 inch bores, so drilling to that diameter creates a cavity that matches the plug for predictable seating.
The unfinished oak screw hole plug has no pre-applied finish, so it accepts stains or clear coats along with surrounding oak surfaces during your normal finishing sequence.
The flat oak screw plug is described as flat, so once trimmed, it is intended to sit level with the work surface, supporting smooth sanding and a flush final appearance.
This screw cover cap and washer class oak plug is suited for locations where screw heads in oak cabinetry, furniture, or trim need to be visually concealed.
Part number OF0375 identifies this specific 3/8 inch unfinished oak flat screw plug, helping you reorder the same plug diameter and style for future work.
The oak wood screw hole plug uses oak stock, so after staining or clear coating, the plug can visually align with adjacent oak components for a more continuous look.
This 3/8 inch unfinished oak wood screw hole plug from Smith Wood Products, Ltd. offers a defined diameter, flat style, and oak construction that support planned boring, plugging, and finishing steps. The screw plug classification signals its role in hiding 3/8 inch screw bores on visible oak work. Choosing the OF0375 part number keeps your fastener concealment approach consistent from one project to the next. Use this oak plug whenever you want screw locations over 3/8 inch bores to remain functional yet visually quiet on finished oak surfaces.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 250 Each | SB38FP-O-L5 Mfr# SB38FP-O | Smith Wood Products, Ltd. 3/8" Unfinished Oak Wood Screw Hole Plug, SB38FP-O - 500/Box | ||||
Sold in: 250 Each | SB38FP-B-L5 Mfr# SB38FP-B | Smith Wood Products, Ltd. 3/8" Unfinished Maple Wood Screw Hole Plug, SB38FP-B - 500/Box | ||||
Sold in: 1000 Each | SB38FP-B Mfr# BF0375 | Smith Wood Products, Ltd. 3/8" Unfinished Maple Wood Screw Hole Plug, BF0375 - 1000/Box | ||||
Sold in: 1000 Each | SB12FP-O Mfr# OF0500 | Smith Wood Products, Ltd. 1/2" Unfinished Oak Wood Screw Hole Plug, OF0500 - 1000/Box |