
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
EPCO MC Series 5 inch pull provides a 5 inch center to center mounting span, giving cabinets and drawers a consistent hand grip width that supports repeatable drilling layouts across multiple fronts in a run. The pull is built from aluminum, so it keeps weight down while still delivering a solid feel when operating doors or drawers all day in a busy space. A satin clear anodized aluminum finish protects the surface during regular use, which helps the handle maintain a uniform appearance on frequently touched fronts. The pull is part of the ADA Compliant Series, which supports accessible grasping when layouts must consider reach and hand clearance. A 3 inch projection sets the pull off the face of the cabinet, creating room for fingers behind the bar in typical door and drawer installations. The 1/2 inch diameter gives the hand a defined edge to grab, helping users get a positive grip with less effort.
The 5 inch center to center layout defines the drilling pattern for this EPCO handle, giving installers a fixed spacing to use when laying out bores on cabinet doors and drawers. A 3 inch projection off the front of the cabinet keeps the gripping area away from the face, which supports clearance around profiled edges and applied moldings. The 1/2 inch diameter establishes the pull bar size, which fits naturally in the hand during frequent openings. The pull installs with 10-32 x 1-1/4 inch screws, so the connection uses a fine machine thread that engages cleanly with the handle body while clamping through standard door and drawer thicknesses. Being part of the ADA Compliant Series, the pull combines its projection and bar size in a way that supports accessible hand access in cabinet and millwork layouts.
The EPCO MC Series 5 inch center to center pull works well wherever a consistent 5 inch hole spacing is specified across cabinets or casework, because that single dimension drives all handle drilling and layout. Its aluminum construction suits high-use cabinetry where a solid grip is needed without adding extra weight to the door or drawer front. The satin clear anodized aluminum finish coordinates with modern hardware and anodized frames, so it fits cleanly into contemporary kitchens, commercial spaces, or utility rooms. With a 3 inch projection, the pull creates an easy-to-access gripping area on doors and drawers, which supports users who rely on a clear gap behind the handle for fingers. The 1/2 inch diameter bar keeps the grip size consistent from opening to opening, helping users quickly find the same hand feel across a full bank of cabinets.
The combination of 5 inch center to center spacing and 3 inch projection gives planners fixed reference points for both drilling and clearance, which reduces layout variation from one cabinet to the next. The ADA Compliant Series designation means the pull geometry is aligned with accessible gripping needs, so designers can specify it when planning installations that must support a wider range of users. The aluminum material pairs with 10-32 x 1-1/4 inch screw mounting, so the connection between the pull and front is secure while remaining serviceable during hardware changes or refacing. The satin clear anodized aluminum finish resists everyday handling, which helps banks of doors and drawers keep a uniform look even when some openings are used more heavily than others. With a 1/2 inch diameter handle bar, each pull gives the fingers a defined surface to grab, supporting controlled opening and closing of cabinet doors and drawers throughout the workspace.
The EPCO MC428-A pull has a 5 inch center to center dimension, which sets predictable hole spacing for drilling jigs and keeps handle alignment consistent across cabinets.
The pull projects 3 inches from the cabinet face, creating space for fingers to wrap behind the handle and improving access on doors and drawers.
The handle is aluminum with a satin clear anodized aluminum finish, so it stays light while the treated surface supports a consistent appearance during repeated use.
The pull has a 1/2 inch diameter, giving the hand a defined thickness to grip, which helps users get a secure hold while operating cabinets.
The MC428-A pull mounts using 10-32 x 1-1/4 inch screws, creating a machine-threaded connection that holds firmly through typical cabinet door and drawer fronts.
The ADA Compliant Series designation indicates the pull geometry supports accessible grasping, which is important in projects designed around user access needs.
The EPCO MC Series 5 inch pull in satin clear anodized aluminum ties together 5 inch center to center mounting, 3 inch projection, and 1/2 inch diameter to support comfortable gripping on doors and drawers. Its aluminum construction and anodized finish provide a light, durable handle choice for cabinet runs that see regular use. With ADA Compliant Series design and 10-32 x 1-1/4 inch screw mounting, the MC428-A pull fits projects where accessible grasping and repeatable installation details matter. Put this EPCO pull to work when a consistent handle layout is needed across cabinets.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | EPMC400-SS Mfr# MC400-SS | EPCO MC 5" (127 mm) Center to Center Stainless Steel Pull, MC400-SS | ||||
Sold in: 1 Each | EPMC427-A Mfr# MC427-A | EPCO MC 4" (102 mm) Center to Center Anodized Satin Clear Aluminum Pull, MC427-A |