Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Metropolis pull defines a 3-3/4 inch center to center handle designed for cabinet and furniture doors or drawers. The 3-3/4 inch (96 mm) center to center layout sets consistent hole spacing, which supports repeatable drilling setups on batch work. The 5 inch overall length gives enough hand clearance along the pull, which helps users comfortably open doors on base cabinets and taller pantry fronts. The 1-1/8 inch projection establishes how far the pull stands off the surface, which provides finger space without extending excessively into walkways. A 5/8 inch width creates a slim profile across the front, which helps maintain a clean visual line across multiple doors. The matte black finish defines the surface color and sheen, which supports projects calling for a modern dark accent. Zinc die cast construction establishes the base material, which sets expectations for weight and feel during daily cabinet use.
The 3-3/4 inch (96 mm) center to center specification defines the exact distance between mounting holes, which allows templates or drilling guides to be set precisely for this pull line. With a 5 inch overall length, the pull extends beyond the mounting holes at each end, which helps with positioning near door edges while maintaining adequate grip area. The 1-1/8 inch projection figure describes the stand-off from the cabinet face, which influences clearance from adjacent doors or walls. A 5/8 inch width sets the thickness across the front of the pull, which interacts with door stile widths when multiple pulls are aligned vertically. The matte black finish and zinc die cast material remain constant across each piece, which supports visual consistency on banks of drawers.
The PA0223-MB designation identifies a Hickory Hardware Metropolis Series pull, which positions it within a decorative hardware family suited to cabinet and furniture fronts. The 3-3/4 inch (96 mm) center to center size aligns with a common drilling standard, which works well for new cabinets drilled to this spacing. With a 5 inch length, the pull fits comfortably on typical kitchen or bath doors, which helps maintain proportion on both narrow and medium-width fronts. The 1-1/8 inch projection supports use on base cabinets and wall cabinets, which provides clearance for fingers when opening heavier loaded drawers. A 5/8 inch width keeps the pull visually lean, which allows it to sit cleanly on face frames or full-overlay doors without dominating narrow rails. The matte black finish offers a uniform dark tone, which supports projects that pair dark hardware with light door finishes or match other black metal elements in the space.
The 3-3/4 inch (96 mm) center to center measurement lets installers repeat the same hole spacing across a full job, which reduces layout variability when working through multiple doors and drawers. The 5 inch total length provides a predictable footprint, which simplifies planning symmetry on drawer banks where pulls line up horizontally. With 1-1/8 inch projection, the pull depth remains constant from piece to piece, which helps doors clear neighboring surfaces the same way along an entire run. The 5/8 inch width gives a consistent grip profile, which allows users to expect the same feel on every cabinet front. Zinc die cast construction supports uniform casting across units, which helps all pulls share the same shape during installation. The matte black finish provides a consistent surface color and sheen, which keeps hardware lines visually continuous under varied lighting in kitchens, baths, or shop built-ins.
The PA0223-MB pull has a 3-3/4 inch (96 mm) center to center dimension, which sets the drilling distance between mounting holes for cabinet doors and drawers.
The Hickory Hardware Metropolis pull measures 5 inches in length, which defines its footprint on the door or drawer face for layout and spacing work.
This matte black cabinet pull projects 1-1/8 inches from the surface, which provides finger clearance while staying compact on cabinet fronts.
The Metropolis Series PA0223-MB pull is made from zinc die cast material, which defines the body composition and weight during handling and installation.
This Belwith Keeler cabinet pull has a matte black finish, which sets a dark, low-gloss appearance on cabinets and furniture fronts.
The Metropolis PA0223-MB cabinet pull is 5/8 inch wide, which defines the front profile and helps in planning spacing on narrow rails.
The Hickory Hardware Metropolis Series PA0223-MB pull combines a 3-3/4 inch (96 mm) center to center layout, 5 inch length, and 1-1/8 inch projection, which supports consistent drilling and comfortable use on cabinets. Pairing zinc die cast construction with a matte black finish gives a defined material and appearance, which aligns hardware details across kitchens, baths, or shop cabinetry. For projects calling for a 3-3/4 inch center to center matte black cabinet pull, this Metropolis model offers set dimensions that streamline layout and installation decisions.
Sold In: 1 Each