Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware Sunnyside pull gives you a 3-3/4 inch (96 mm) center to center chrome pull that works as a cabinet handle where precise hole spacing already exists. The zinc die cast construction forms a solid handle body, which supports dependable everyday gripping on doors and drawers. The chrome finish provides a bright, reflective surface, which keeps the pull visually aligned with other chrome decorative hardware in the same area. The pull length of 4-1/2 inches sets the outer dimension, which helps you position it correctly on cabinet faces with existing design lines. A 1 inch projection brings the grip away from the door surface, giving fingers clearance while keeping the handle close enough to the face of the cabinet. The 1/2 inch width creates a lean front view, which helps this pull sit cleanly on narrow or wider rail sections without looking oversized.
The 3-3/4 inch (96 mm) center to center measurement defines exactly where mounting holes must be drilled, which makes it straightforward to align this pull with existing 96 mm installations or with templates set for that spacing. The 4-1/2 inch overall length gives a clear reference for how much of the rail or stile the handle will cover, which matters when balancing it with panel reveals and neighboring hardware. With a 1 inch projection, the pull stands off the surface just enough to allow comfortable gripping, which is useful on both doors and drawers that are opened frequently. The 1/2 inch width keeps the handle visually light, which helps when lining up multiple pulls in a run of cabinets. The zinc die cast construction provides a defined form, which supports repeatable placement and appearance across every door or drawer front.
The P4596-CH chrome pull from the Metropolis collection is suited to cabinet applications that call for a 3-3/4 inch (96 mm) center to center drilling, which aligns with many standard kitchen, bath, and built-in cabinet layouts. Its 4-1/2 inch length lets it sit comfortably on most drawer fronts and doors, which supports consistent sizing across uppers, lowers, and utility cabinets. The 1 inch projection provides clearance for fingers as you open and close doors or drawers, which is especially helpful on heavier fronts that require a full hand grip. With a 1/2 inch width, the pull maintains a slimmer appearance across different cabinet styles, which means it can run in rows without visually overpowering smaller fronts. The chrome finish ties into other chrome decorative hardware and moldings, which supports a unified look when you match it with hinges or other handles from the same space.
The defined 3-3/4 inch (96 mm) center to center drilling on this Belwith Keeler cabinet pull allows you to repeat the same layout across multiple doors and drawers, which helps maintain straight, level lines of hardware on long cabinet runs. Its 4-1/2 inch overall length gives a predictable outer dimension, which you can use as a reference when aligning pulls with drawer widths or door stile widths for a balanced appearance. The 1 inch projection establishes a steady stand-off distance from the cabinet face, which helps doors and drawers operate without fingers dragging against the surface. Because the pull is zinc die cast, every unit follows the same molded form, which supports uniform feel and alignment from one cabinet front to the next. The chrome finish adds a consistent reflective tone, which helps hardware lines read evenly under varying light along a wall of cabinets.
The Hickory Hardware Sunnyside pull uses a 3-3/4 inch (96 mm) center to center drilling, which matches many standard cabinet hole patterns for straightforward alignment.
The P4596-CH chrome cabinet pull has an overall length of 4-1/2 inches, which defines how much space it occupies on the door or drawer face.
This zinc die cast chrome pull has a 1 inch projection, which sets the stand-off distance from the cabinet surface for finger clearance.
The Metropolis collection cabinet pull is 1/2 inch wide, which results in a slim profile on the cabinet face.
The P4596-CH pull is made from zinc die cast material, which provides a solid, molded construction for the handle.
This Belwith Keeler cabinet pull has a chrome finish, which coordinates with other chrome decorative hardware and moldings.
The P4596-CH Belwith Keeler cabinet pull brings a 3-3/4 inch (96 mm) center to center layout, a 4-1/2 inch overall length, and a 1 inch projection, which together define a clear fit on many cabinet doors and drawers. Its zinc die cast construction and chrome finish create a handle that aligns with other chrome decorative hardware while keeping dimensions consistent from piece to piece. For projects that call for a 96 mm drilling pattern and a slim 1/2 inch wide front profile, this Hickory Hardware Sunnyside pull from the Metropolis collection offers a defined set of measurements you can work to on your next cabinet run.
Sold In: 1 Each