
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Hickory Hardware Conquest pull is a zinc die cast cabinet pull in the Conquest collection, so it gives a consistent look when matching other pieces from the same series across a job. The Venetian Bronze finish provides a darker bronze tone on the pull, which supports projects that call for a bronze appearance on cabinet and furniture fronts. The pull has a 3 inch center to center dimension, which sets the screw hole spacing for drilling layouts on doors and drawers. Its overall length is 4-1/2 inches, so the hand contact area extends past the mounting points and gives fingers stable contact when operating doors. A projection of 3/4 inch positions the gripping surface off the cabinet face, helping fingers catch the pull without scraping the surface. The width of 9/16 inch defines the front profile, which influences how the pull lines up visually with rail widths and narrow drawer fronts.
The pull has a 3 inch center to center dimension, which locks in the spacing between mounting holes and helps keep rows of pulls aligned across banks of cabinets. Its overall length of 4-1/2 inches lets the pull extend beyond the screw locations, so the hand contact zone is centered and balanced over the hardware. A projection of 3/4 inch determines how far the pull stands off the door or drawer, which affects both finger clearance and how far the profile stands proud of the face. The width of 9/16 inch defines the visible front band of material, creating a slim footprint that lines up neatly on narrow stiles. The specified 8-32 x 1 inch screw size pairs with the pull's mounting holes, setting the thread pattern and reach used to secure the pull through typical cabinet fronts.
This Venetian Bronze cabinet pull is part of the Conquest collection, so it suits projects where matching pulls are needed across multiple cabinets and furniture pieces. The 3 inch center to center layout fits applications built around that common drilling pattern, allowing doors and drawers to share the same hole spacing. With a 4-1/2 inch overall length, the pull covers a modest span on the face, which works well on standard cabinet doors, smaller pantry doors, and typical drawer widths. The 9/16 inch width keeps the profile narrow, so it fits visually on slim rails or smaller drawer fronts without dominating the face design. Its 3/4 inch projection supports use on doors where moderate stand-off is desired, giving a clear grasp point while keeping the pull closer to the cabinet line.
The 3 inch center to center dimension on this pull supports repeatable installation because drilling patterns can be standardized across a room, reducing layout variation from door to door. The specified overall length of 4-1/2 inches helps installers position the pull consistently by referencing its ends relative to door and drawer edges. A projection of 3/4 inch maintains a predictable stand-off, so every mounted pull provides similar finger clearance and feel when opening cabinets. The 9/16 inch width gives a known front footprint, helping align the pull along centerlines without covering decorative profiles or narrow frame sections. The zinc die cast construction keeps the pull shape consistent from piece to piece, which matters when lined up across long runs of cabinetry. The Venetian Bronze finish ties all installed pulls together visually, supporting a uniform appearance on multi-cabinet installations.
The Hickory Hardware Conquest pull has a 3 inch center to center size, so hole spacing is set at 3 inches for drilling cabinet doors and drawer fronts.
The P14461-VBZ pull has an overall length of 4-1/2 inches, giving a moderate span that fits well on standard cabinet doors and drawers.
This cabinet pull has a 3/4 inch projection, setting the distance from the cabinet face to the front of the pull for finger clearance.
The Hickory Hardware Conquest pull is made from zinc die cast material, which provides a solid, molded construction for cabinet use.
The P14461-VBZ cabinet pull uses a Venetian Bronze finish, giving the pull a bronze-toned appearance suited to bronze-themed hardware layouts.
This Venetian Bronze pull is specified with 8-32 x 1 inch screws, so the mounting holes are matched to that thread and length combination.
The Hickory Hardware Conquest pull pairs a 3 inch center to center layout with a 4-1/2 inch overall length, giving a practical balance between mounting standard and hand grip area. Its Venetian Bronze finish and zinc die cast construction define both appearance and material, guiding selection for projects built around bronze-toned hardware. With a 3/4 inch projection and 9/16 inch width, the pull sets clear profile dimensions that help plan cabinet layouts. For jobs that specify the P14461-VBZ part number, these defined measurements and finish details support consistent results across all installed pulls.
Sold In: 1 Each