Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Satin nickel cabinet pull in the Hickory Hardware Conquest Series provides a simple, consistent grip point across cabinet doors and drawers, which supports smooth everyday operation in kitchens, baths, and built-ins. The pull is produced by Belwith Keeler, so installers can match it to existing Hickory Hardware projects that already use this series and want the same visual language carried through new work. A center to center measurement of 3 inches (76 mm) defines the hole spacing, which matters when aligning to standard drilled cabinet fronts or swapping out older hardware that uses this common size. Overall length of 3-3/8 inches gives a little overhang beyond the hole centers, which leaves enough bar to grasp without crowding adjacent fronts. A projection of 7/8 inch and width of 3/4 inch set the hand clearance and visual thickness in the field.
Center to center distance of 3 inches (76 mm) establishes the drilling pattern, which matters when laying out jigs, templates, or CNC programs for repetitive cabinet runs. The 3-3/8 inch overall length gives visual coverage beyond the holes, which can help conceal minor variances in drilling while still presenting a consistent edge-to-edge reveal on the face. Width of 3/4 inch keeps the pull narrow enough for smaller drawer fronts, which helps avoid overlapping neighboring details or stile edges. Projection of 7/8 inch fixes the stand-off from the cabinet surface, which defines how fingers engage the pull and how far it protrudes into adjacent clearances. Screw size of 8-32 x 1 inch sets the thread and length expectations at the mounting point, which supports a familiar fastener interface for cabinet and drawer fronts built to common thicknesses.
The Hickory Hardware Conquest Series 3 inch (76 mm) center to center satin nickel pull is suited to cabinet doors and drawers where a measured, repeatable layout is important. Its 3 inch center to center dimension aligns with a standard drilling distance, which supports use on modular cabinet runs or production-built boxes that share this spacing. The 3-3/8 inch overall length gives the hardware a modest footprint, which helps it sit comfortably on narrow drawer fronts or rail sections without overpowering the face. Satin nickel finish keeps reflections controlled, which is useful under under-cabinet lighting, task lighting, or large window exposure where glare can distract from the cabinet design. Zinc die cast construction gives the pull a uniform profile, which means that doors and drawers across a bank read as a single coordinated set.
The defined 3 inch (76 mm) center to center spacing lets installers reuse drilling templates from prior 3 inch jobs, which can reduce layout time and keep holes consistent from cabinet to cabinet. Projection of 7/8 inch creates a compact stand-off, which helps maintain clearance in tight walkways or galley layouts while still offering a usable grip. Width of 3/4 inch gives enough bearing surface on the door or drawer face, which helps the pull feel visually anchored without covering too much material. The 3-3/8 inch overall length neatly brackets the mounting points, which can help visually align multiple pulls along a run of drawers so that sightlines stay straight. The specified screw size of 8-32 x 1 inch establishes the fastener thread and reach through typical cabinet material, which supports a familiar hardware interface during installation and service.
The pull has a 3 inch (76 mm) center to center size, which sets the hole spacing and allows it to fit layouts drilled for that common cabinet hardware dimension.
The Hickory Hardware Conquest pull measures 3-3/8 inches in overall length, which slightly overhangs the 3 inch mounting holes to give a comfortable gripping area.
The satin nickel cabinet pull is zinc die cast, which provides a solid metal body and defined contours for consistent feel on doors and drawers.
The cabinet pull projects 7/8 inch from the surface, which sets finger clearance and keeps the profile relatively tight to the cabinet face.
The Hickory Hardware pull is 3/4 inch wide, which defines the contact area on the cabinet face and helps plan spacing on narrow fronts.
The Belwith Keeler pull uses 8-32 x 1 inch screws, which provides a familiar cabinet hardware thread and reach through typical door and drawer thicknesses.
The Hickory Hardware Conquest Series 3 inch (76 mm) center to center satin nickel pull from Belwith Keeler is built around common cabinet dimensions, which helps it slot into many new or replacement layouts. Its zinc die cast construction, 3-3/8 inch overall length, 3/4 inch width, and 7/8 inch projection define how it will sit and feel on doors and drawers. For projects built around 3 inch center to center drilling and a satin nickel look, this pull offers a straightforward way to keep measurements, finishes, and hand-feel aligned across the installation.
Sold In: 1 Each