Pro Value Modern Pull 3" (76 mm) Center to Center, Brushed Nickel, NOTCHPULL3-BPN

Brushed Nickel Cabinet Pull 3 Inch For Cabinets

Brushed nickel cabinet pull 3 inch describes a Pro Value Modern Series handle that uses a 3 inch (76 mm) center to center layout, so it lines up with standard drilling for many cabinet and drawer fronts. The brushed nickel finish on this pull creates a muted metallic look, which helps hardware sit visually between bright chrome and flat finishes on doors and drawers. A zinc die cast material forms the body of the pull, giving the handle a solid metal feel while maintaining a consistent shape at the ends for a clean front view. The overall length of 4-7/8 inches leaves finger room beyond the mounting holes, which supports a comfortable grip across typical cabinet rail widths. A projection of 7/8 inch brings the pull slightly off the surface, giving space behind the handle for fingers to wrap.

Key Brushed Nickel Pull Details For Projects

• The Pro Value Modern Series identity ties this pull to a modern style family, which helps keep hardware visually consistent across multiple doors and drawers during a project.
• The zinc die cast construction gives this handle a single-piece metal body, which supports a uniform feel from edge to edge when opening heavier cabinet doors.
• The brushed nickel finish on the pull softens reflections, which helps minor fingerprints and everyday marks show less on frequently used cabinet fronts.
• The 4-7/8 inch length or diameter dimension places the grip past the mounting points, which provides extra grab area on wider drawer faces or pantry doors.
• The 3 inch (76 mm) center to center spacing follows a common drilling pattern, which simplifies setting up jigs and repeating hole locations across a run of cabinets.

Installation Dimensions And Mounting Fit Details

The 3 inch (76 mm) center to center measurement on this pull defines the distance between the mounting holes, which guides drilling when laying out new cabinet or drawer fronts. An overall length of 4-7/8 inches means the pull extends beyond the hole centers, framing the hardware evenly across typical face frame or frameless applications. The 7/8 inch projection dimension measures how far the handle stands off the cabinet surface, shaping the clearance behind the pull for gripping fingers. The 8-32 x 1 screw size listed for this product sets the thread and length pairing used at each mounting point, which aligns with common cabinet hardware drilling through standard door and drawer thicknesses.

Using This Pro Value Modern Series Cabinet Pull

Where This 3 Inch Handle Works Best

The 3 inch center to center layout on this Pro Value Modern Series pull suits cabinet doors and drawers planned around that common spacing, so it works well in layouts using standard drilling jigs. A total length of 4-7/8 inches lets the pull sit proportionally across typical base, wall, and vanity cabinet fronts, giving enough visual span without overwhelming narrower rails. With a 7/8 inch projection, the pull stands off the face just enough to allow fingers to fit comfortably behind the bar, which matters on thicker door profiles where clearance is limited. The brushed nickel finish complements many door colors, so the same handle can run across kitchen, bath, or shop cabinetry while maintaining a consistent brushed metal look. A zinc die cast material keeps the form stable at each end of the pull, so both mounting points align cleanly when dropped onto pre-drilled holes.

Details That Support Consistent Installation Results

The 3 inch (76 mm) center to center dimension on this pull lets installers set up a single drilling layout, which supports faster, repeatable installation across multiple cabinets and drawer fronts. Because the overall length measures 4-7/8 inches, there is predictable overhang beyond the hole centers, which helps align the handle visually on rails and drawer faces during layout. The 7/8 inch projection holds the gripping surface away from the door or drawer front, which reduces knuckle contact with finished surfaces when opening and closing. The zinc die cast construction keeps both ends of the pull rigid around the mounting locations, which supports a snug fit against the cabinet face once fastened. The specified 8-32 x 1 screw size matches the threaded mounting on the pull, which coordinates with typical through-bore holes in many cabinet construction setups.

Common Questions About This Brushed Nickel Pull

Selecting This Pull For Your Next Cabinet Run

The Pro Value Modern Series NOTCHPULL3-BPN brings together a 3 inch (76 mm) center to center layout, 4-7/8 inch overall length, and 7/8 inch projection, giving clear measurements for planning your cabinet drilling. The zinc die cast construction and brushed nickel finish deliver a consistent modern look across doors and drawers, while the 8-32 x 1 screw size coordinates with common cabinet hardware drilling. Put these dimensions to work on your next cabinet run to keep hardware alignment, grip spacing, and appearance on a single, predictable standard.